Bang & Olufsen BEOLINK Handbook page 14

10
Contents
Use
Type number
Contents
Jack
Use
Type number
Miscellaneous
ML/MCL Converter
ML/MCL Converters consist of a control box and a power amplifier.
1.5m
ML/MCL Converters are used when it is necessary to convert from Master
Link (ML) to Master Control Link (MCL). A conversion is necessary where an
existing MCL installation is to be used together with a Master Link driver in
the main room, e.g. a BeoSound Ouverture.
ML/MCL Converters can also be used if the main room system consists of a
BeoSystem AV 9000 and a Master Panel AV 9000 with distribution via an
existing MCL system.
See section on setups using ML/MCL Converters, page 19.
1165066 (AUS)
1165166 (EU)
1165266 (GB)
1165366 (USA/CDN)
BeoLink PC2
BeoLink PC2 consists of a control box which is connected to the computer
via a USB and jack plug cable. All connections are made to this box (Mains,
Master Link, Power Link and any IR eye).
USB
If you want to watch TV and DVD on the computer via BeoLink, a TV card
must also be installed in the computer (the card can be purchased as an
accessory) and a coax cable from the video system's HF socket in the main
room.
Mains
BeoLink PC2 allows you to listen to your saved music files in the rest of your
Master Link system (e.g. in the main room). It is also possible to listen to
sources while sitting at your computer (e.g. radio and CD).
It is possible to connect an IR eye (8087030) and Power Link loudspeakers.
1670 (EU)
1671 (DK)
1672 (GB)
1673 (USA/CDN)
In addition to the accessories supplied, the installation also requires a
Master Link cable and plugs, sockets and junction boxes (see also section on
installation types, page 23).
MASTER LINK
1674 (JPN)
1675 (AUS)
1678 (CH)
1679 (I)