Maintenance And Basic Care - Maxon EM-4800 Operating Instructions Manual

CONVENTIONAL MODE OPERATION
SCAN OPERATION, Continued
Transmitting While In Scan, Continued
With off-hook scan enabled, moving
Off-hook scan enabled:
the microphone off-hook will not affect scan operation. The
radio will continue scanning. If a signal is not being received,
the radio will transmit on the selected channel. If a signal is
being received, the radio can be PC programmed (using the
"scan transmit channel" option) to either stay on the receive
channel or revert to the selected channel when the micro-
phone P-T-T is keyed.
When the microphone is on-hook and the radio
On-hook:
is not receiving a channel, the radio always transmits on
the selected channel.
When the radio is receiving a channel, the radio's personality
can be programmed to transmit either on the received channel
or the selected channel. If the radio was programmed for
the selected channel, the display will change to the selected
channel when the transmitter is keyed.

MAINTENANCE AND BASIC CARE

It is strongly recommended that your
ANTENNA REMOVAL:
antenna be removed from its mounting prior to passing
through an automatic car wash in order to prevent antenna
and /or vehicle damage. Refer to your antenna instruction
guide for information on how to safely remove the antenna
from its mounting.
The radio is protected by one or more
FUSE REPLACEMENT:
fuses located in the cables connected to the vehicle power
42