Table of Contents
Advertisement
5. MAINTENANCE AND REPAIR
GENERAL
Any repair or adjustment should only be made by or under the supervision of a qualified radio
service technician. When removing or fitting, use the Exploded View and Parts List in
conjunction with the following procedures:
Important: Before disassembling and reassembling the radio, wear a conduction wrist strap to prevent
any components on its main board from being damaged by electrostatic discharge.
SEPARATING UPPER AND BOTTOM COVER
1. Unfasten the four mounting screws
located on the bottom cover of
the radio.
Fig 5.2. Opening the upper cover
Figure 5.1. Loosing the four mounting screws
2. Open slowly the upper cover from the side of
power connector.
34
Advertisement
Table of Contents
