Maintenance And Repair; General; Removing & Replacing The Upper Cover - Maxon SD-125E Service Manual

7.1 GENERAL

When removing or fitting, use the Exploded View and Parts List, located on
following procedures:
• WARNING: Disconnect the SD-125E from all external equipment at the D-Sub connector prior to
disassembly.
7.2 REMOVING & REPLACING THE UPPER COVER
Removing the Upper Cover:
Unscrew the four upper cover mounting screws located on the upper cover of the radio.
1.
To replace the Upper Cover:
Reverse the steps taken to remove the Upper Cover.
1.
Figure 1-Upper Cover Removal
- 16 -
MAXONCIC
SD-125E RF LINK MODULE
page 28 in conjunction with the