Sampling; Changing The Tempo - Casio transformer xw-pd1 User Manual

Using the Step Sequencer to Create a Song
Display
Name
Indicator
Sound

Sampling

Note
Effect
Phrase
3.
While holding down the PAD selector button,
use the 11 (–) and 12 (+) buttons to change
the pad tone.
This changes the tone of the pad you pressed in step 1.
Sampling
Use the procedure below to sample sounds and assign
them to a pad.
1.
Press the SAMPLING selector button.
2.
Use the VALUE knob to select the sampling
type.
Display
Indicator
00-31 Samples for approximately three seconds.
32-35 Samples for approximately nine seconds.
3.
Press the pad to which you want to assign the
sampled sounds.
EN-16
Description
Tapping the pad sounds a drum
kit, or a snare drum or other
single sound. This tone can be
selected when "DRM" (drum) is
selected as the tone for all pads.
Tapping the pad produces a
sound recorded with the
sampler. This tone can be
selected when "DRM" (drum) is
selected as the tone for all pads.
Tapping the pad plays a musical
scale using the tone assigned to
all pads. This tone can be
selected when "MLD" (melody),
"SYN" (solo synthesizer), or
"SMP" (sampling) is selected as
the tone for all pads.
Tapping the pad applies the
effect.
Tapping the pad plays multiple-
note phrase.
Description
4.
Press the REC selector button.
This starts recording.
5.
Play the sounds you want to sample.
6.
Recording will stop when the specified
recording time elapses or if you press the
REC button.

Changing the Tempo

You can use either of the two methods below to change
the tempo of a sequence.
While holding down the TAP/TEMPO selector
button, use pads 11 (–) and 12 (+) to change the
tempo.
Use the TAP/TEMPO button to tap the desired
tempo. The setting will the average of a and b in the
illustration below.
a
First tap Second tap
b
Third tap