Audi A3 Sportback g-tron Owner's Manual page 260

258 Fuses a nd bulbs
.,. Please refer to
c:)
.&.
in General notes on
page 253.
... Open the bonnet .
... Pull off the cover
c:)
Fig. 2 72 .
... Turn the connector as far as the stop in the
direction of the arrow
o Fig. 273 and
re-
move the light unit from the headlight
housing .
.,. Replace the bulb (together with the holder).
Installing bulb for main beam
headlights/daytime running lights
Applies to vehicles: with halogen headlights
When changing the bulb, you can check the
position of the bulb through the headlight
glass.
Fig. 274 Bulb housing: Fitting the bulb
... If necessary, use
a
cloth to remove any fin-
gerprints from the glass part of the bulb.
... Insert the bulb
c')
Fig. 2 74 o
&.
in General
notes on page 253.
... Look through the headlight g lass to check
that the bulb is in the correct position.
... Carefu lly turn the bulb holder clockwise un-
til the contacts engage.
... Replace the cover.
... Check whether the new bu lb is working .
... Have the headlight settings checked as soon
as possible.
CD
CAUTION
Make sure that the cover is correctly seat-
ed to ensure that water cannot enter the
headlight housing and to prevent the
headlight from malfunctioning.
Removing bulb for side lights
Applies to vehicles: with halogen headlights
Fig. 275 Engine compartment: Removing cover (side
lights)
Fig. 276 Bulb holder for side lights
For illustration purposes,
c:)
Fig. 2 76 shows
the inside of the unit with the headlight re-
moved .
... Switch off the lights and the ignition .
... Please refer to
c:)
&
in General notes on
page 253 .
... Open the bonnet.
... Pull off the cover In the direction of the ar-
row c) Fig. 275.
... Pull the bu lb connector out in the direction
of t he arrow
c) Fig . 276.
... Pull the defective bulb out of the connector
and replace the bulb .