Languages - Pitco W14S-S WF Installation, Operation And Maintenance Manual

2.3.2.4 Languages

To set the language that will be displayed follow the procedure below:
1. Press the program key
are still in the low level programming mode from a previous procedure you will not need to
enter the password.
2. Press the zero (0) product key. The display will change to show "SELECT".
3. Next press the four (4) product key to enter the language program. The display will change
to indicate "ENGLISH" or the current language.
4. To toggle through the available language settings press the zero (0) product key.
5. To exit the language setting program press the program key
programming menu press the program key
2.3.2.5 Melt Cycle
To select the melt cycle desired follow the procedure below:
1. Press the program key
are still in the low level programming mode from a previous procedure you will not need to
enter the password.
2. Press the zero (0) product key. The display will change to show "SELECT".
3. Next press the five (5) product key to enter the melt cycle program. The display will change
to indicate "SOLID" or the current melt setting.
4. To toggle through the three available melt cycle settings press the zero (0) product key. Each
of the settings (NO MELT, LIQUID, or SOLID) will be displayed as the zero (0) key is
pressed.
5. After selecting the desired melt cycle, (or to exit viewing the current setting) press the
program key
6. To exit the programming mode press the program key
and enter the password (if a password is programmed). If you
and enter the password (if a password is programmed). If you
to return to the program mode.
2-10
once. To exit the low level
again.
again.