Page 1 2007 GMC Yukon, Yukon XL Owner Manual Seats and Restraint Systems ....... 7 Instrument Panel ........199 Front Seats ..........9 Instrument Panel Overview ....202 Rear Seats Climate Controls ..........19 ........227 Safety Belts Warning Lights, Gages, and ..........
Page 2 Headlamp Aiming ......... 503 Maintenance Schedule ......575 Bulb Replacement ........ 506 Maintenance Schedule ......576 Windshield Wiper Blade Replacement ..509 Customer Assistance Information ..... 595 Tires ............. 510 Customer Assistance and Information ..596 Appearance Care ........555 Reporting Safety Defects ......
Page 3: Canadian Owners
If the GENERAL MOTORS, GM, the GM Emblem, vehicle is sold, leave this manual in the vehicle. GMC, the GMC Truck Emblem, and the name YUKON are registered trademarks of General Motors Corporation.
Page 4: How To Use This Manual
How to Use This Manual CAUTION: Many people read the owner manual from beginning to end when they ﬁrst receive their new vehicle. If this is done, it can help you learn These mean there is something that could about the features and controls for the vehicle. hurt you or other people.
Page 5: Vehicle Symbols
Vehicle Damage Warnings Vehicle Symbols Also, in this manual you will ﬁnd these notices: The vehicle has components and labels that use symbols instead of text. Symbols are shown Notice: These mean there is something along with the text describing the operation or that could damage your vehicle.
Page 6 These are some examples of symbols that may be found on the vehicle:...
Page 7: Table Of Contents
Section 1 Seats and Restraint Systems Front Seats ............. 9 Shoulder Belt Height Adjustment ....51 Manual Seats ..........9 Safety Belt Use During Pregnancy ....52 Power Seats ..........10 Right Front Passenger Position ....52 Power Lumbar ..........11 Center Front Passenger Position ....
Page 8 Section 1 Seats and Restraint Systems Airbag System ..........93 Servicing Your Airbag-Equipped Vehicle ..110 Where Are the Airbags? ......97 Adding Equipment to Your When Should an Airbag Inﬂate? ....100 Airbag-Equipped Vehicle ......111 What Makes an Airbag Inﬂate? ....102 Restraint System Check ......
Page 9: Front Seats
Front Seats To move a manual seat forward or rearward: 1. Lift the bar to unlock Manual Seats the seat. 2. Slide the seat to where you want it CAUTION: and release the bar. You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving.
Page 10: Power Seats
Power Seats To adjust the seat, do any of the following: • Move the seat forward or rearward by sliding the control forward or rearward. • Raise or lower the front part of the seat cushion by moving the front of the control up or down. •...
Page 11: Power Lumbar
Power Lumbar • To raise the height of the lumbar support, press and hold the top of the control. • To lower the height of the lumbar support, press and hold the bottom of the control. Release the control when the lower seatback reaches the desired level of lumbar support.
Page 12: Heated Seats
Heated Seats (Heated Seat and Seatback): Press this button to turn on the heated seat and seatback. On vehicles with heated The light on the button will come on to indicate that front seats, the controls the feature is working. Press the button to cycle are located on the through the temperature settings of high, medium, driver’s and passenger’s...
Page 13: Memory Seat, Mirrors, And Pedals
Memory Seat, Mirrors, and Pedals Not all mirrors will have the ability to save and recall their positions. Your vehicle may have the memory package. Not all adjustable throttles and brake pedals The controls for this will have the ability to save and recall their feature are located on positions.
Page 14 Easy Exit Seat To stop recall movement of the memory function at any time, press one of the power seat controls, The control for this feature is located on the memory buttons, power mirror buttons, or driver’s door panel between buttons 1 and 2. adjustable pedal switch.
Page 15: Reclining Seatbacks
Reclining Seatbacks If the seats have manual reclining seatbacks, the lever used to operate them is located on the Manual Reclining Seatbacks outboard side of the seat(s). CAUTION: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving.
Page 16 Power Reclining Seatbacks To return the seatback to an upright position, do the following: 1. Lift the lever fully without applying pressure to the seatback and the seatback will return to the upright position. 2. Push and pull on the seatback to make sure it is locked.
Page 17 CAUTION: Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts cannot do their job when you are reclined like this. The shoulder belt cannot do its job. In a crash, you could go into it, receiving neck or other injuries.
Page 18: Head Restraints
Head Restraints Pull the head restraint up to raise it. To lower the head restraint, press the release button (A), located on the top of the seatback, while you push the head restraint down. The front seats may have head restraints that also tilt forward and rearward.
Page 19: Center Seat
Center Seat (Heated Seat): To heat the seat cushion, press the button with the heated seat symbol. Your vehicle may have a front center seat. The seatback doubles as an armrest and A heated seat symbol will be shown in the RSA cupholder/storage area for the driver and display to indicate that the feature is on.
Page 20: 60/40 Split Bench Seat (Second Row)
60/40 Split Bench Seat (Second Row) If your vehicle has a 60/40 split bench, the seat(s) can be folded for additional cargo space or folded and tumbled for easy entry and exit to the third row seats, if your vehicle has them. These seats will have either the manual fold and tumble feature or the automatic seat release fold and tumble feature.
Page 21 3. Lift the same lever again to release the rear of the seat from the ﬂoor. The seat will tumble forward. The seatback will fold forward automatically. Leaving the seatback in this position creates a ﬂat load ﬂoor. If the seatback cannot fold ﬂat, try moving the front seat forward and/or put the front seatback in the upright position.
Page 22 Returning the Seat(s) to the Sitting Position CAUTION: To return the seat to the sitting position, do the following: 1. Pull the seat down until it latches to the ﬂoor. A safety belt that is improperly routed, not The seatback cannot be raised if the seat is properly attached, or twisted will not not latched to the ﬂoor.
Page 23 Folding and Tumbling the Seat(s) from the Third Row Seats CAUTION: Using the third row seating position while the second row is folded, or folded and tumbled, could cause injury in a sudden stop or crash. Be sure to return the seat to the passenger seating position.
Page 24 Automatic Release Fold and Tumble 2. From the front seats, press one of Feature the automatic The transmission must be in PARK (P) for this seat release buttons feature to work. located on the overhead console. Folding and Tumbling the Seat(s) CAUTION: Overhead Console Automatically folding and tumbling the...
Page 25 Returning the Seat(s) to the Sitting Position CAUTION: To return the seat to the sitting position, do the following: 1. Pull the seat down until it latches to the ﬂoor. A safety belt that is improperly routed, The seatback cannot be raised if the seat is not properly attached, or twisted will not not latched to the ﬂoor.
Page 26: Bucket Seats (Second Row)
Folding and Tumbling the Second Row 2. Press the automatic seat release button Seat(s) from the Third Row Seats or located on the Outside panel behind the rear doors. CAUTION: Using the third row seating position while the second row is folded, or folded and tumbled, could cause injury in a sudden Driver’s Side Rear Panel stop or crash.
Page 27 Reclining Seatbacks To return the seatback to an upright position, do the following: To recline the seatback, do the following: 1. Lift the lever fully without applying pressure to the seatback and the seatback will return to the upright position. CAUTION: If the seatback is not locked, it could move forward in a sudden stop or crash.
Page 28 Manual Fold and Tumble Feature Folding and Tumbling the Seat(s) To fold and tumble the seat, do the following: 1. Make sure that there is nothing under, in front of, or on the seat. Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts.
Page 29 Returning the Seat(s) to the Sitting Position 3. Lift the lever again to release the rear To return the seat to the sitting position, do the of the seat from following: the ﬂoor. The seat 1. Pull the seat down until it latches to the ﬂoor. will tumble forward.
Page 30 Folding and Tumbling the Seat(s) from the 2. Lift the lever, located on the bottom rear Third Row Seats of the second row seat on the inboard CAUTION: side, to release the seatback. The seatback will Using the third row seating position while fold forward.
Page 31 Automatic Release Fold and Tumble 2. From the front seats, press one of Feature the automatic The transmission must be in PARK (P) for this seat release buttons feature to work. located on the overhead console. Folding and Tumbling the Seat(s) CAUTION: Overhead Console Automatically folding and tumbling the...
Page 32 Returning the Seat(s) to the Sitting Position Folding and Tumbling the Second Row Seat(s) from the Third Row Seats or To return the seat to the sitting position, do the Outside following: 1. Pull the seat down until it latches to the ﬂoor. CAUTION: The seatback cannot be raised if the seat is not latched to the ﬂoor.
Page 33: Third Row Seat
Folding the Seatback(s) 2. Press the automatic seat release button To fold the seatback, do the following: located on the panel behind the 1. Open the liftgate to access the controls for rear doors. the seat. 2. Remove all items on the seat cushion. Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts.
Page 34 Unfolding the Seatback(s) Tumbling the Third Row Seat The seat can be tumbled forward for additional To return the seatback to the upright position, cargo space. do the following: To tumble the seat, do the following: 1. Open the liftgate to access the controls for the seat.
Page 35 5. Lift the rear of the seat up from the ﬂoor. 5. Pull up on the seatback until it locks into the upright position. 6. Tilt the seat fully forward to lock it into place. 7. Push and pull on the seat to make sure it is locked.
Page 36 Removing the Third Row Seat Installing the Third Row Seat To remove the seat, do the following: To install the seat, do the following: 1. Open the liftgate to access the controls for 1. Open the liftgate to access the rear of the the seat.
Page 37 4. Push and pull on the seat to make sure it is locked into place. The seatback cannot be CAUTION: raised to the upright position unless the seat is secured to the ﬂoor. A safety belt that is improperly routed, 5.
Page 38: Safety Belts
Safety Belts CAUTION: Safety Belts: They Are for Everyone It is extremely dangerous to ride in a This part of the manual tells you how to use cargo area, inside or outside of a vehicle. safety belts properly. It also tells you some things In a collision, people riding in these areas you should not do with safety belts.
Page 39 Why Safety Belts Work In most states and in all Canadian provinces, the law says to wear safety belts. Here is When you ride in or on anything, you go as fast why: They work. as it goes. You never know if you will be in a crash. If you do have a crash, you do not know if it will be a bad one.
Page 40 Put someone on it. Get it up to speed. Then stop the vehicle. The rider does not stop.
Page 41 The person keeps going until stopped by or the instrument panel... something. In a real vehicle, it could be the windshield...
Page 42: Questions And Answers About
Questions and Answers About Safety Belts Will I be trapped in the vehicle after an accident if I am wearing a safety belt? You could be — whether you are wearing a safety belt or not. But you can unbuckle a safety belt, even if you are upside down.
Page 43: How To Wear Safety Belts Properly
How to Wear Safety Belts Properly If I am a good driver, and I never drive far from home, why should I wear safety belts? This part is only for people of adult size. You may be an excellent driver, but if you are Be aware that there are special things to know in an accident —...
Page 44: Driver Position
Driver Position The lap-shoulder belt may lock if you pull the belt across you very quickly. If this happens, Lap-Shoulder Belt let the belt go back slightly to unlock it. Then pull the belt across you more slowly. The driver has a lap-shoulder belt. Here is how to 4.
Page 45 6. To make the lap part tight, pull up on the shoulder belt. It may be necessary to pull stitching on the The lap part of the belt should be worn low and safety belt through the latch plate to fully snug on the hips, just touching the thighs.
Page 46 What is wrong with this? CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should ﬁt against your body. The shoulder belt is too loose. It will not give nearly as much protection this way.
Page 47 What is wrong with this? CAUTION: You can be seriously hurt if your lap belt is too loose. In a crash, you could slide under the lap belt and apply force at your abdomen. This could cause serious or even fatal injuries. The lap belt should be worn low and snug on the hips, just touching the thighs.
Page 48 What is wrong with this? CAUTION: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not at the pelvic bones. This could cause serious internal injuries.
Page 49 What is wrong with this? CAUTION: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the ribs, which are not as strong as shoulder bones.
Page 50 What is wrong with this? CAUTION: You can be seriously injured by a twisted belt. In a crash, you would not have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer/retailer to ﬁx it.
Page 51: Shoulder Belt Height Adjustment
Shoulder Belt Height Adjustment Before you begin to drive, move the shoulder belt adjuster to the height that is right for you. Adjust the height so that the shoulder portion of the belt is centered on your shoulder. The belt should be away from your face and neck, but not falling off your shoulder.
Page 52: Safety Belt Use During Pregnancy
Safety Belt Use During Pregnancy The best way to protect the fetus is to protect the mother. When a safety belt is worn properly, Safety belts work for everyone, including pregnant it is more likely that the fetus will not be hurt in a women.
Page 53: Center Front Passenger Position
Center Front Passenger Position Lap Belt Your vehicle may have a center front seating position. To make the belt shorter, pull its free end as shown until the belt is snug. Buckle, position and release it the same way as the lap part of a lap-shoulder belt.
Page 54: Rear Seat Passengers
Rear Seat Passengers Lap-Shoulder Belt All rear seat positions have lap-shoulder belts. It is very important for rear seat passengers to Here is how to wear one properly. buckle up! Accident statistics show that unbelted people in the rear seat are hurt more often in crashes than those who are wearing safety belts.
Page 55 2. Push the latch plate into the buckle until it clicks. Pull up on the latch plate to make sure it is secure. When the shoulder belt is pulled out all the way, it will lock. If it does, let it go back all the way and start again.
Page 56 And you would be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen. This could cause serious or even fatal injuries. The shoulder belt should go over the shoulder and across the chest.
Page 57: Rear Safety Belt Comfort Guides
Rear Safety Belt Comfort Guides Rear shoulder belt comfort guides may provide added safety belt comfort for older children who have outgrown booster seats and for some adults. When installed on a shoulder belt, the comfort guide positions the belt away from the neck and head.
Page 58 Here is how to install a comfort guide to the safety belt: Third Row If your vehicle has a third row, remove the guide from its storage pocket on the side Second Row of the seat. 1. For the second row, remove the guide from its storage clip on the interior body.
Page 59 2. Slide the guide under and past the belt. 3. Be sure that the belt is not twisted and it lies The elastic cord must be under the belt. ﬂat. The elastic cord must be under the belt Then, place the guide over the belt, and insert and the guide on top.
Page 60 CAUTION: A safety belt that is not properly worn may not provide the protection needed in a crash. The person wearing the belt could be seriously injured. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces.
Page 61: Safety Belt Pretensioners
Safety Belt Pretensioners Safety Belt Extender Your vehicle has safety belt pretensioners for the If the vehicle’s safety belt will fasten around you, driver and right front passenger. Although you you should use it. cannot see them, they are part of the safety belt But if a safety belt is not long enough, your assembly.
Page 62: Child Restraints
Child Restraints What is the proper way to wear safety belts? If possible, an older child should wear a Older Children lap-shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face or neck.
Page 63 What if a child is wearing a lap-shoulder belt, but the child is so small that the shoulder belt is very close to the child’s face or neck? If the child is sitting in a rear seat outside position, move the child toward the center of the vehicle.
Page 64 CAUTION: Never do this. Here a child is sitting in a seat that has a lap-shoulder belt, but the shoulder part is behind the child. If the child wears the belt in this way, in a crash the child might slide under the belt.
Page 65: Infants And Young Children
Infants and Young Children CAUTION: Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the Children can be seriously injured or traveler changes the need, for everyone, to use strangled if a shoulder belt is wrapped safety restraints.
Page 66 CAUTION: People should never hold a baby in their arms while riding in a vehicle. A baby does not weigh much — until a crash. During a crash a baby will become so heavy it is not possible to hold it. For example, in a crash at only 25 mph (40 km/h), a 12 lb (5.5 kg) baby will suddenly become a 240 lb (110 kg) force...
Page 67 CAUTION: Children who are up against, or very close to, any airbag when it inﬂates can be seriously injured or killed. Airbags plus lap-shoulder belts offer protection for adults and older children, but not for young children and infants. Neither the vehicle’s safety belt system nor its airbag system is designed for them.
Page 68 What are the different types of add-on child restraints? CAUTION: Add-on child restraints, which are purchased by the vehicle’s owner, are available in four basic Newborn infants need complete support, types. Selection of a particular restraint should including support for the head and neck. take into consideration not only the child’s This is necessary because a newborn weight, height, and age but also whether or not...
Page 69: Child Restraint Systems
Child Restraint Systems CAUTION: The body structure of a young child is quite unlike that of an adult or older child, for whom the safety belts are designed. A young child’s hip bones are still so small that the vehicle’s regular safety belt may not remain low on the hip bones, as it should.
Page 70 A rear-facing infant seat (B) provides restraint A forward-facing child seat (C-E) provides restraint with the seating surface against the back of the for the child’s body with the harness and also infant. The harness system holds the infant sometimes with surfaces such as T-shaped or in place and, in a crash, acts to keep the infant shelf-like shields.
Page 71 How Should I Use a Child Restraint? A child restraint system is any device designed for use in a motor vehicle to restrain, seat, or position children. A built-in child restraint system is a permanent part of the motor vehicle. An add-on child restraint system is a portable one, which is purchased by the vehicle’s owner.
Page 72 Securing an Add-on Child Restraint in See Lower Anchors and Tethers for Children (LATCH) on page 76 for more information. the Vehicle A child can be endangered in a crash if the child restraint is not properly secured in the vehicle. CAUTION: When securing an add-on child restraint, refer to the instructions that come with the restraint...
Page 73 Securing the Child Within the Child Restraint CAUTION: There are several systems for securing the child A child can be seriously injured or killed within the child restraint. One system, the three-point harness, has straps that come down in a crash if the child is not properly over each of the infant’s shoulders and buckle secured in the child restraint.
Page 74: Where To Put The Restraint
Where to Put the Restraint CAUTION: Accident statistics show that children are safer if they are restrained in the rear rather than the front seat. We recommend that child restraints be A child in a rear-facing child restraint can secured in a rear seat, including an infant riding be seriously injured or killed if the right in a rear-facing infant seat, a child riding in a front passenger’s airbag inﬂates.
Page 75 CAUTION: (Continued) CAUTION: guarantee that an airbag will not deploy A child in a child restraint in the center under some unusual circumstance, even front seat can be badly injured or killed by though it is turned off. We recommend the right front passenger’s airbag if it that rear-facing child restraints be secured inﬂates.
Page 76: Lower Anchors And Tethers For Children
Lower Anchors and Tethers for When installing a child restraint with a top tether, you must also use either the lower anchors or Children (LATCH) the safety belts to properly secure the child restraint. A child restraint must never be attached The LATCH system holds a child restraint during using only the top tether and anchor.
Page 77 Lower Anchors Top Tether Anchor Lower anchors (A) are metal bars built into the A top tether (A, C) anchors the top of the child vehicle. There are two lower anchors for each restraint to the vehicle. A top tether anchor is built LATCH seating position that will accommodate a into the vehicle.
Page 78 Lower Anchor and Top Tether Anchor Some child restraints with top tethers are designed for use with or without the top tether being Locations attached. Others require the top tether always to (Lower Anchor): be attached. In Canada, the law requires that Seating positions with forward-facing child restraints have a top tether, two lower anchors.
Page 79 For models with a three passenger third row seat, (Top Tether Anchor): see the information following for installing a Seating positions with child restraint with a top tether in the third row, top tether anchors. if your vehicle has one. Never install two top tethers using the same top tether anchor.
Page 80 Second Row Seat — Bucket Second Row Seat — 60/40 For models with bucket second row seating, the For models with 60/40 second row seating, the top top tether anchors are located at the bottom rear of tether anchors are located at the bottom rear of the seat cushion for each seating position in the the seat cushion for each seating position in second row.
Page 81 For vehicles with a three passenger third row seat, there is one top tether anchor located at the bottom rear of the seat cushion that can be used for either the third row center or driver side seating position. Never install two top tethers using the same top tether anchor.
Page 82 Securing a Child Restraint Designed for the LATCH System CAUTION: Each top tether anchor and lower anchor CAUTION: in the vehicle is designed to hold only one child restraint. Attaching more than one If a LATCH-type child restraint is not child restraint to a single anchor could attached to anchors, the restraint will not cause the anchor or attachment to come...
Page 83 Folding an empty rear seat with the safety belts secured may cause damage to the safety CAUTION: belt or the seat. When removing the child restraint, always remember to return the safety Children can be seriously injured or belts to their normal, stowed position before strangled if a shoulder belt is wrapped folding the rear seat.
Page 84 2. If the child restraint manufacturer recommends If the position you are that the top tether be attached, attach and using does not have a tighten the top tether to the top tether anchor, head rest/restraint if the vehicle has one. Refer to the child and you are using a restraint instructions and the following steps: dual tether, route...
Page 85: Securing A Child Restraint In A
Securing a Child Restraint in a If the position you are using has an adjustable Rear Seat Position head rest/restraint and you are using a If your child restraint has the LATCH system, single tether, raise the see Lower Anchors and Tethers for Children head rest/restraint (LATCH) on page 76.
Page 86 Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say. 1. Put the child restraint on the seat. 2. Pick up the latch plate, and run the lap and shoulder portions of the vehicle’s safety belt through or around the restraint.
Page 87 6. If your child restraint manufacturer recommends using a top tether, and the position that you are using has a top tether anchor, attach and tighten the top tether to the top tether anchor. Refer to the instructions that came with the child restraint and to Lower Anchors and Tethers for Children (LATCH) on page 76.
Page 88: Securing A Child Restraint In The Center Front Seat Position
Securing a Child Restraint in the Securing a Child Restraint in the Center Front Seat Position Right Front Seat Position Your vehicle has a right front passenger airbag. A rear seat is a safer place to secure a CAUTION: forward-facing child restraint. See Where to Put the Restraint on page 74.
Page 89 A label on your sun visor says, “Never put a rear-facing child seat in the front.” This is because CAUTION: (Continued) the risk to the rear-facing child is so great, if the airbag deploys. guarantee that an airbag will not deploy under some unusual circumstance, even though it is turned off.
Page 90 If your child restraint has the LATCH system, Secure the child in the child restraint when and as see Lower Anchors and Tethers for Children the instructions say. (LATCH) on page 76. 1. Your vehicle has a right front passenger’s frontal airbag.
Page 91 3. Pick up the latch plate, and run the lap and shoulder portions of the vehicle’s safety belt through or around the restraint. The child restraint instructions will show you how. 5. Pull the rest of the shoulder belt all the way out of the retractor to set the lock.
Page 92 7. Push and pull the child restraint in different directions to be sure it is secure. 8. If the airbag is off, the off indicator will be lit and stay lit when the key is turned to RUN or START. If a child restraint has been installed and the on indicator is lit, turn the vehicle off.
Page 93: Airbag System
Airbag System Also make sure the child restraint is not trapped under the vehicle head restraint. If this happens, Your vehicle has a frontal airbag for the driver and adjust the head restraint. a frontal airbag for the right front passenger. If the on indicator is still lit, secure the child in the Your vehicle may also have roof-mounted rollover child restraint in a rear seat position in the vehicle...
Page 94 Frontal airbags are designed to help reduce the risk of injury from the force of an inﬂating CAUTION: (Continued) frontal airbag. But these airbags must inﬂate very quickly to do their job and comply with federal Airbags are “supplemental restraints” to regulations.
Page 95 CAUTION: (Continued) CAUTION: Roof-mounted rollover airbags are Both frontal and roof-mounted rollover designed to inﬂate in moderate to severe airbags inﬂate with great force, faster than crashes where something hits the side of the blink of an eye. If you are too close to your vehicle, during a vehicle rollover, an inﬂating airbag, as you would be if you or in a severe frontal impact.
Page 96 There is an airbag readiness light on the CAUTION: instrument panel cluster, which shows the Anyone who is up against, or very close to, airbag symbol. any airbag when it inﬂates can be seriously injured or killed. Airbags plus lap-shoulder belts offer the best protection for adults, The system checks the airbag electrical system for but not for young children and infants.
Page 97: Where Are The Airbags
Where Are the Airbags? The right front passenger’s airbag is in the instrument panel on the passenger’s side. The driver’s airbag is in the middle of the steering wheel.
Page 98 If your vehicle has a roof-mounted rollover airbag If your vehicle has a roof-mounted rollover airbag for the driver and the person seated directly for the right front passenger and the person behind the driver, it is located in the ceiling above directly behind that passenger, it is located in the the side windows.
Page 99 CAUTION: If something is between an occupant and an airbag, the bag might not inﬂate properly or it might force the object into that person causing severe injury or even death. The path of an inﬂating airbag must be kept clear. Do not put anything between an occupant and an airbag, and do not attach or put anything on the steering wheel hub or on or near any...
Page 100: When Should An Airbag Inﬂate
When Should an Airbag Inﬂate? If the front of your vehicle goes straight into a wall that does not move or deform, the threshold The driver’s and right front passenger’s frontal level for the reduced deployment is about airbags are designed to inﬂate in moderate 9 to 16 mph (14 to 26 km/h), and the threshold to severe frontal or near-frontal crashes.
Page 101 Frontal airbags (driver and right front passenger) In any particular crash, no one can say whether are not intended to inﬂate during vehicle an airbag should have inﬂated simply because rollovers, rear impacts, or in many side impacts. of the damage to a vehicle or because of what the repair costs were.
Page 102: What Makes An Airbag Inﬂate
What Makes an Airbag Inﬂate? How Does an Airbag Restrain? In an impact of sufficient severity, the airbag In moderate to severe frontal or near frontal sensing system detects that the vehicle is collisions, even belted occupants can contact the in a crash.
Page 103: What Will You See After An Airbag Inﬂates
What Will You See After an CAUTION: Airbag Inﬂates? After a frontal airbag inﬂates, it quickly deﬂates, so When an airbag inﬂates, there may be quickly that some people may not even realize dust in the air. This dust could cause an airbag inﬂated.
Page 104: Passenger Sensing System
Passenger Sensing System In many crashes severe enough to inﬂate the airbag, windshields are broken by vehicle Your vehicle has a passenger sensing system. deformation. Additional windshield breakage may The passenger airbag status indicator on the also occur from the right front passenger airbag. overhead console will be visible when you turn •...
Page 105 The passenger sensing system works with sensors that are part of the right front passenger’s CAUTION: seat and safety belt. The sensors are designed to detect the presence of a properly-seated A child in a rear-facing child restraint can occupant and determine if the passenger’s airbag be seriously injured or killed if the right should be enabled (may inﬂate) or not.
Page 106 The passenger sensing system is designed to turn When the passenger sensing system has turned off the right front passenger’s airbag if: off the passenger’s airbag, the off indicator will light and stay lit to remind you that the airbag is off. •...
Page 107 Also make sure the child restraint is not trapped For some children who have outgrown child under the vehicle head restraint. If this happens, restraints and for very small adults, the passenger adjust the head restraint. sensing system may or may not turn off the right front passenger’s airbag, depending upon If the on indicator is still lit, secure the child in the the person’s seating posture and body build.
Page 108 If a person of adult-size is sitting in the right front passenger’s seat, but the off indicator is lit, it could be because that person is not sitting properly in the seat. If this happens, turn the vehicle off and ask the person to place the seatback in the fully upright position, then sit upright in the seat, centered on the seat cushion, with the person’s legs comfortably extended.
Page 109 Aftermarket equipment, such as seat covers, can affect how well the passenger sensing system CAUTION: operates. You may want to consider not using seat covers or other aftermarket equipment. If the airbag readiness light in the See Adding Equipment to Your Airbag-Equipped instrument panel cluster ever comes on Vehicle on page 111 for more information about modiﬁcations that can affect how the...
Page 110: Servicing Your Airbag-Equipped Vehicle
Servicing Your Airbag-Equipped CAUTION: Vehicle Airbags affect how your vehicle should be For up to 10 seconds, after the ignition is serviced. There are parts of the airbag system in turned off and the battery is disconnected, several places around your vehicle. You do an airbag can still inﬂate during improper not want the system to inﬂate while someone is service.
Page 111: Adding Equipment To Your Airbag-Equipped Vehicle
Adding Equipment to Your Because I have a disability, I have to get my vehicle modiﬁed. How can I ﬁnd out Airbag-Equipped Vehicle whether this will affect my airbag system? Is there anything I might add to the front Changing or moving any parts of the or sides of the vehicle that could keep the front seats, safety belts, the airbag sensing airbags from working properly?
Page 112: Restraint System Check
Restraint System Check Also look for any opened or broken airbag covers, and have them repaired or replaced. The airbag system does not need regular maintenance. Checking the Restraint Systems Notice: If you damage the covering for the Now and then, make sure the safety belt reminder driver’s or the right front passenger’s airbag, light and all your belts, buckles, latch plates, or the side impact airbag covering on the...
Page 113: Replacing Restraint System Parts After A Crash
Replacing Restraint System Parts If belts are cut or damaged, replace them. Collision damage also may mean you will need to After a Crash have LATCH system, safety belt or seat parts repaired or replaced. New parts and repairs may be necessary even if the belt or LATCH system CAUTION: was not being used at the time of the collision.
Page 114 ✍ NOTES...
Page 115: Features And Controls
Section 2 Features and Controls Keys ............117 Starting and Operating Your Vehicle ..143 Remote Keyless Entry (RKE) System ..118 New Vehicle Break-In ........ 143 Remote Keyless Entry (RKE) System Ignition Positions ........144 Operation ..........119 Retained Accessory Power (RAP) ..... 145 Starting the Engine ........
Page 116 Section 2 Features and Controls Mirrors ............166 Universal Home Remote System ....179 Automatic Dimming Rearview Mirror System Identiﬁcation ........179 ® with OnStar , Compass and Universal Home Remote System ....180 Temperature Display ......166 Universal Home Remote System Automatic Dimming Rearview Mirror Operation (With One Triangular LED) ..
Page 117: Keys
Keys CAUTION: Leaving children in a vehicle with the ignition key is dangerous for many reasons, children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows will function with the keys in the ignition and they could be seriously injured or killed if caught in the path of a...
Page 118: Remote Keyless Entry (Rke) System
Remote Keyless Entry (RKE) Your vehicle has one double-sided key System for the ignition and all door locks. Your Remote Keyless Entry (RKE) system operates on a radio frequency subject to Federal Communications Commission (FCC) Rules and with Industry Canada. This device complies with Part 15 of the FCC Rules.
Page 119: Operation
Remote Keyless Entry (RKE) At times you may notice a decrease in operating range. This is normal for any RKE system. If System Operation the transmitter does not work or if you have to stand closer to your vehicle for the transmitter to The vehicle’s doors can be locked and unlocked work, try this: from about 3 feet (1 m) up to 65 feet (20 m)
Page 120 (Lock): Press the lock button to lock all the doors. If enabled through the Driver Information Center (DIC), the parking lamps will ﬂash once to indicate locking has occurred. If enabled through the DIC, the horn will chirp when the lock button is pressed again within ﬁve seconds of the previous press of the lock button.
Page 121 Matching Transmitter(s) to Your (Liftglass): Press and hold this button on the RKE transmitter to open the liftglass. Vehicle & (Power Liftgate): Press and hold this button Each RKE transmitter is coded to prevent another transmitter from unlocking your vehicle. If a on the RKE transmitter to open and close the transmitter is lost or stolen, a replacement can be liftgate.
Page 122 Battery Replacement Under normal use, the battery in the RKE transmitter should last about four years. The battery is weak if the transmitter will not work at the normal range in any location. If you have to get close to your vehicle before the transmitter works, it is probably time to change the battery.
Page 123 4. Snap the front and the back of the transmitter the key is turned to RUN. If your vehicle does not together. have an automatic climate control system, during remote start, you will need to manually turn 5. Test the operation of the transmitter with the the heated seats on and off.
Page 124 After entering the vehicle during a remote start, (Remote Start): Press and release the lock insert and turn the key to RUN to drive the vehicle. button and then press and hold the remote start button to start the vehicle. If the vehicle is left running it will automatically shut off after 10 minutes unless a time extension To start the vehicle using the remote start feature,...
Page 125 Remote Start Ready The additional ten minutes are considered a second remote vehicle start. If your vehicle does not have the remote vehicle Once two remote starts, or a single remote start start feature, it may have the remote start ready with one time extension has been done, the feature.
Page 126: Doors And Locks
Doors and Locks CAUTION: (Continued) Door Locks Always lock your vehicle whenever you leave it. • Outsiders can easily enter through an CAUTION: unlocked door when you slow down or stop your vehicle. Locking your Unlocked doors can be dangerous. doors can help prevent this from •...
Page 127: Power Door Locks
Power Door Locks Delayed Locking The power door lock switches are located on the When locking the doors with the power lock switch armrest on the front doors. or the remote keyless entry (RKE) transmitter and a door or the liftgate is open, the doors will (Unlock): Press the side of the switch with the lock ﬁve seconds after the last door is closed.
Page 128: Programmable Automatic Door Locks
Programmable Automatic Door Rear Door Security Locks Locks Your vehicle has rear door security locks. These prevent passengers from opening the rear Vehicles with an automatic lock/unlock feature doors from the inside. enable you to program the vehicle’s power door locks. You can program this feature through The rear door security the Driver Information Center (DIC).
Page 129: Lockout Protection
Lockout Protection To set the locks, do the following: 1. Insert the key into the security lock slot and This feature protects you from locking the key in turn it so the slot is in the horizontal position. the vehicle when the key is in the ignition and a front door is open.
Page 130: Liftgate/Liftglass
Liftgate/Liftglass CAUTION: (Continued) • CAUTION: If you have air outlets on or under the instrument panel, open them all the way. It can be dangerous to drive with the • If your vehicle has a power liftgate, liftglass or liftgate open because carbon disable the power liftgate function.
Page 131 To open the entire liftgate, press the touchpad on the underside of the liftgate handle (B). The vehicle must be in PARK (P) to open the liftgate. To close the liftgate, use the pull cup or pull strap as an aid. The liftgate or liftglass cannot be opened if the rear wipers are in motion.
Page 132: Power Liftgate
Power Liftgate To open and close the liftgate, press and hold the power liftgate button on the Remote Keyless Your vehicle may have a power liftgate. The Entry (RKE) transmitter until the liftgate starts vehicle must be in PARK (P) to power open or moving.
Page 133 the liftgate may reverse to the open position. Cargo could fall out of the vehicle. Always make sure the power liftgate is closed and latched before you drive away. If you power open the liftgate and the liftgate support struts have lost pressure, the lights will ﬂash and a chime will sound.
Page 134 Your vehicle has pinch sensors located on the To open the liftgate, press the touchpad on the side edges of the liftgate. If an object is caught handle on the outside of the liftgate, and lift between the liftgate and the body and presses the gate open.
Page 135: Power Running Boards
CAUTION: (Continued) CAUTION: • If you have air outlets on or under It can be dangerous to drive with the the instrument panel, open them liftglass or liftgate open because carbon all the way. monoxide (CO) gas can come into your •...
Page 136: Windows
The switch used to disable the power CAUTION: (Continued) running boards is located on the center injuries or even death from heat stroke. console below the Never leave a child, a helpless adult, or a climate control system. pet alone in a vehicle, especially with the windows closed in warm or hot weather.
Page 137: Power Windows
Power Windows The power window controls are located on each of the side doors. CAUTION: Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome from extreme heat in warm or hot weather and suffer permanent injuries or even death from heat stroke.
Page 138: Sun Visors
Express-Down Windows Sun Visors The driver and front passenger windows have an Pull the sun visor down to block glare. Detach the express-down feature that allows the windows sun visor from the center mount and slide it along to be lowered without holding the switch. Press the rod from side-to-side to cover the driver or down fully on the window switch, then release, passenger side of the front window.
Page 139: Content Theft-Deterrent
Content Theft-Deterrent 3. Close all doors. The security light will stop ﬂashing and go off after approximately Your vehicle may have a content theft-deterrent 30 seconds. The content theft deterrent alarm alarm system. is not armed until the security light goes off. If a door is opened without using the RKE transmitter, a ten second pre-alarm will occur.
Page 140 Testing the Alarm Here is how to avoid setting off the alarm by accident: The alarm can be tested by following these steps: • If you do not want to activate the 1. From inside the vehicle, lower the driver’s theft-deterrent system, the vehicle should be window and open the driver’s door.
Page 141: Pass-Key Iii+ Operation
® ® PASS-Key III+ PASS-Key III+ uses a radio frequency transponder in the key that matches a decoder in ® The PASS-Key III+ system operates on a radio your vehicle. frequency subject to Federal Communications Commission (FCC) Rules and with Industry ®...
Page 142 If the engine still does not start, and the key To program the new additional key do the appears to be undamaged, try another ignition following: key. At this time, you may also want to check the 1. Verify that the new key has a stamped on it.
Page 143: Starting And Operating Your Vehicle
Starting and Operating Your • Avoid making hard stops for the ﬁrst 200 miles (322 km) or so. During this time Vehicle your new brake linings are not yet broken in. Hard stops with new linings can mean premature wear and earlier New Vehicle Break-In replacement.
Page 144: Ignition Positions
Ignition Positions only with your hand. Make sure the key is all the way in. If it is, turn the steering wheel left and right while you turn the key hard. If none of this works, then your vehicle needs service. B (ACCESSORY): This position lets you use things like the radio and the windshield wipers when the engine is off.
Page 145: Retained Accessory Power (Rap)
Key In the Ignition Once the key is turned from RUN to LOCK, the windows and sunroof will continue to work Never leave your vehicle with the keys inside, as it until a door is opened. The radio will continue to is an easy target for joy riders or thieves.
Page 146 Your vehicle has a Computer-Controlled 2. If the engine does not start after 5-10 seconds, Cranking System. This feature assists in especially in very cold weather (below 0°F or −18°C), it could be ﬂooded with too much starting the engine and protects components. If the ignition key is turned to the START position, gasoline.
Page 147: Adjustable Throttle And Brake Pedal
Adjustable Throttle and Brake Pedal No adjustment to the pedals can be made when the vehicle is in REVERSE (R) or while using If your vehicle has this feature, you can change the cruise control. the position of the throttle and brake pedals. Your vehicle may have a memory function which This feature is designed for shorter drivers, since allows pedal settings to be saved and recalled.
Page 148 To Use the Engine Coolant Heater 4. Before starting the engine, be sure to unplug and store the cord as it was before to keep it 1. Turn off the engine. away from moving engine parts. If you do 2. Open the hood and unwrap the electrical not, it could be damaged.
Page 149: Active Fuel Management
Active Fuel Management™ Automatic Transmission Operation Your vehicle’s V8 engine may have Active Fuel There are several different positions for the Management™. This system allows the engine to shift lever. operate on either all or half of its cylinders, depending on the driving conditions. When less power is required, such as cruising at a constant vehicle speed, the system will operate in the half cylinder mode, allowing your vehicle to...
Page 150 PARK (P): This position locks your rear wheels. It is the best position to use when you start your CAUTION: engine because your vehicle cannot move easily. If you have four-wheel drive, your vehicle CAUTION: will be free to roll — even if your shift lever is in PARK (P) —...
Page 151 NEUTRAL (N): In this position, your engine does DRIVE (D): This position is for normal driving. It not connect with the wheels. To restart when provides the best fuel economy for your vehicle. If you are already moving, use NEUTRAL (N) only. you need more power for passing, and you are: Also, use NEUTRAL (N) when your two-wheel •...
Page 152 SECOND (2): This position reduces vehicle speed Notice: Spinning the tires or holding the even more than THIRD (3) without using your vehicle in one place on a hill using only the brakes. You can use SECOND (2) on hills. It can accelerator pedal may damage the help control your speed as you go down steep transmission.
Page 153: Tow/Haul Mode
Tow/Haul Mode When Tow/Haul mode is selected the Tow/Haul indicator light will come on. ® The Tow/Haul mode works with the Autoride feature, if the vehicle has this, to enhance the ride when trailering or with a loaded vehicle. See ®...
Page 154: Four-Wheel Drive
Four-Wheel Drive Front Axle Locking Feature The front axle locks and unlocks automatically If your vehicle has four-wheel drive, you can send when you shift the transfer case. Some delay for your engine’s driving power to all four wheels the axle to lock or unlock is normal. for extra traction.
Page 155 You can choose among ﬁve driving settings: AUTO (Automatic Four-Wheel Drive): This setting is ideal for use when road surface traction Indicator lights in the switches show you which conditions are variable. When driving your setting you are in. The indicator lights will come on vehicle in AUTO, the front axle is engaged, but brieﬂy when you turn on the ignition and the last the vehicle’s power is primarily sent to the...
Page 156 Shifting Into Four-Wheel Drive High or AUTO (Automatic Four-Wheel Drive) CAUTION: Turn the knob to the Four-Wheel High or AUTO position. This can be done at any speed, Shifting the transfer case to NEUTRAL except when shifting from Four-Wheel Drive Low. can cause your vehicle to roll even if the The indicator light will ﬂash while shifting.
Page 157 Shifting Out of Four-Wheel Drive Low The preferred method for shifting into Four-Wheel Drive Low is to have your vehicle moving To shift from Four-Wheel Drive Low to Four-Wheel 1 to 2 mph (1.6 to 3.2 km/h). Turn the knob to the Drive High, AUTO, or Two-Wheel Drive High, Four-Wheel Drive Low position.
Page 158 The vehicle may have signiﬁcant engagement 4. Put the transmission in NEUTRAL (N). noise and bump when shifting between 5. Shift the transfer case to Two-Wheel Four-Wheel Drive Low and Four-Wheel Drive Drive High. High ranges or from NEUTRAL while the engine 6.
Page 159 Shifting Out of NEUTRAL Notice: Shifting the transmission into gear before the Four-Wheel Drive Low indicator light To shift out of NEUTRAL do the following: has stopped ﬂashing could damage the 1. Set the parking brake and apply the regular transfer case.
Page 160: Parking Brake
Parking Brake To release the parking brake, hold the regular brake pedal down. Pull the bottom edge of To set the parking brake, hold the regular brake the lever, located above the parking brake pedal, pedal down with your right foot. Push down with the parking brake symbol, to release the the parking brake pedal with your left foot.
Page 161: Shifting Into Park (P)
Shifting Into Park (P) 1. Hold the brake pedal down with your right foot and set the parking brake. 2. Move the shift lever into the PARK (P) CAUTION: position by pulling the shift lever toward you and moving it up as far as it will go. 3.
Page 162 Leaving Your Vehicle With the Engine If you have to leave your vehicle with the engine running, be sure your vehicle is in PARK (P) Running and the parking brake is ﬁrmly set before you leave it. After you move the shift lever into PARK (P), hold the regular brake pedal down.
Page 163: Shifting Out Of Park (P)
Parking Over Things That Burn When you are ready to drive, move the shift lever out of PARK (P) before you release the parking brake. If torque lock does occur, you may need to have another vehicle push yours a little uphill to take some of the pressure from the parking pawl in the transmission, then you will be able to pull the shift lever out of PARK (P).
Page 164: Engine Exhaust
Engine Exhaust CAUTION: (Continued) CAUTION: If you ever suspect exhaust is coming into your vehicle: • Engine exhaust can kill. It contains the Drive it only with all the windows gas carbon monoxide (CO), which you down to blow out any CO; and •...
Page 165 CAUTION: (Continued) CAUTION: (Continued) engine running, the vehicle can move deadly carbon monoxide (CO) into your suddenly. You or others could be injured. vehicle even if the climate control fan is at To be sure your vehicle will not move, the highest setting.
Page 166: Mirrors
Mirrors Temperature and Compass Display Press the on/off button, located to the far Automatic Dimming Rearview Mirror left, brieﬂy to turn the compass/temperature display on or off. ® with OnStar , Compass and If the display reads CAL, the compass needs to Temperature Display be calibrated.
Page 167 Automatic Dimming Mirror Operation Such interference may be caused by a magnetic antenna mount, magnetic note pad The automatic dimming mirror function is turned on holder, or a similar magnetic item. automatically each time the ignition is started. • The compass does not display the correct To operate the automatic dimming mirror, do the heading and the compass zone variance following:...
Page 168: With Compass And Temperature
To adjust for compass variance, do the following: approximately four seconds of inactivity, the new zone number will be locked in and 1. Find your current location and variance the compass/temperature display will return. zone number on the following zone map. Cleaning the Mirror When cleaning the mirror, use a paper towel or similar material dampened with glass cleaner.
Page 169 Temperature Display Compass Calibration The temperature can be displayed by pressing the The compass may need calibration if one of the compass/temperature button. Pressing the following occurs: compass/temperature button once brieﬂy, will • If CAL is displayed while driving in the vehicle. toggle the display reading on and off.
Page 170 Compass Variance The mirror is set in zone eight upon leaving the factory. It will be necessary to adjust the compass to compensate for compass variance if the vehicle is outside zone eight. Under certain circumstances, as during a long distance cross-country trip, it will be necessary to adjust for compass variance.
Page 171: Outside Manual Mirrors
Cleaning the Mirror Outside Trailer-Tow Mirrors Use a paper towel or similar material dampened with glass cleaner. Do not spray glass cleaner directly on the mirror as that may cause the liquid cleaner to enter the mirror housing. Outside Manual Mirrors Adjust your outside mirrors so you can just see the side of your vehicle and have a clear view of objects behind you.
Page 172: Outside Power Mirrors
Your vehicle may have outside heated mirrors Press (A) to select the driver’s side mirror or (B) to which help clear them of condensation, snow, and select the passenger’s side mirror. Press either ice. When the rear window defogger button is (A) or (B) again to deselect the mirror.
Page 173: Outside Power Foldaway Mirrors
Outside Power Foldaway Mirrors If the mirrors are accidentally folded/unfolded manually, they may shake or ﬂutter at normal driving speeds and may not stay in the unfolded If your vehicle is position. If this happens, you will need to reset the equipped with outside mirrors.
Page 174: Outside Automatic Dimming Mirror
Turn Signal Indicator Outside Curb View Assist Mirrors Your vehicle may have a turn signal indicator on If your vehicle has the memory package, the the mirror. An arrow on the mirror will ﬂash in outside mirrors are able to perform the curb view the direction of the turn or lane change.
Page 175: Outside Convex Mirror
Outside Convex Mirror “Rear Window Defogger” under Dual Automatic Climate Control System on page 231 or Climate Your passenger’s side mirror may have convex Control System on page 227 for more information. glass. A convex mirror’s surface is curved so you ®...
Page 176 ® ® OnStar service is provided to you subject to the For more information, press the OnStar button to ® ® OnStar Terms and Conditions. You may speak with an advisor. Some OnStar services ® cancel your OnStar service at any time by (such as Remote Door Unlock or Stolen Vehicle ®...
Page 177 ® Available Services included with Directions OnStar Virtual Advisor ® & Connections Plan ® ® OnStar Virtual Advisor is a feature of OnStar • All Safe and Sound Plan Services Hands-Free Calling that uses your minutes to access location-based weather, local traffic reports, •...
Page 178 ® ® How OnStar Service Works is compatible with the OnStar service. Not all services are available everywhere, particularly in ® In order to provide you with OnStar services, remote or enclosed areas, or at all times. ® your vehicle’s OnStar system has the capability ®...
Page 179: Universal Home Remote System
Universal Home Remote System System Identiﬁcation Your vehicle may have a Universal Home Remote System. If there are three round LED indicator lights above Determine which Universal Home Remote your the Universal Home Remote buttons, follow the vehicle has and then read the pages following for instructions under Universal Home Remote System instructions on programming your speciﬁc Operation (With Three Round LED).
Page 180: Universal Home Remote System
Universal Home Remote System Universal Home Remote System Operation (With One Triangular LED) The Universal Home Remote System provides a way to replace up to three hand-held Radio-Frequency (RF) transmitters used to activate devices such as garage door openers, security systems, and home lighting. This device complies with Part 15 of the FCC Rules.
Page 181 Programming the Universal Home Read the instructions completely before attempting to program the Universal Home Remote. Because Remote System of the steps involved, it may be helpful to have Follow these steps to program up to three devices: another person available to assist you in the programming steps.
Page 182 4. The indicator light will ﬂash slowly at ﬁrst and 6. Locate in the garage, the garage door opener then rapidly after Universal Home Remote receiver (motor-head unit). Locate the “Learn” successfully receives the frequency signal or “Smart” button. This can usually be from the hand-held transmitter.
Page 183 Gate Operator and Canadian Using Universal Home Remote Programming Press and hold the appropriate Universal Home Remote button for at least half of a second. Canadian radio-frequency laws require transmitter The indicator light will come on while the signal signals to time out or quit after several seconds is being transmitted.
Page 184: Universal Home Remote System Operation (With Three Round Led)
Reprogramming a Single Universal Universal Home Remote System Home Remote Button Operation (With Three Round LED) To program a device to Universal Home Remote using a Universal Home Remote button previously trained, follow these steps: 1. Press and hold the desired Universal Home Remote button.
Page 185 Read the instructions completely before attempting Programming a garage door opener involves to program the transmitter. Because of the steps time-sensitive actions, so read the entire procedure involved, it may be helpful to have another before you begin. If you do not follow these person available to assist you in programming the actions, the device will time out and you will have transmitter.
Page 186 3. Immediately return to your vehicle. Press and hold the universal home remote button that you would like to use to control the garage door until the garage door moves. The indicator light, above the selected button, should slowly blink. You may need to hold the button from ﬁve to 20 seconds.
Page 187 Programming Universal Home 1. To verify if you have a Fixed Code garage door opener, remove the battery cover on Remote — Fixed Code your hand held transmitter supplied by Most garage door openers sold before 1996 are the manufacturer of your garage door opener Fixed Code units.
Page 188 2. Write down the eight to 12 switch settings from left to right as follows: • When a switch is in the up position, write “Left.” • When a switch is in the down position, write “Right.” • If a switch is set between the up and down position, write “Middle.”...
Page 189 5. After entering all of the switch positions, again, ﬁrmly press and release all three buttons at the same time. The indicator lights will turn on. 6. Press and hold the button you would like to use to control the garage door until the garage door moves.
Page 190: Storage Areas
Using Universal Home Remote 2. Once the indicator lights begin to blink, release both buttons. The codes from all Press and hold the appropriate button for at buttons will be erased. least half of a second. The indicator light will For help or information on the Universal Home come on while the signal is being transmitted.
Page 191: Center Console Storage Area
Luggage Carrier The vehicle may have a luggage carrier that can be used to load things on top of the vehicle. The luggage carrier has siderails attached to the roof. It may also have crossrails which can be moved back and forth to help secure cargo. Tie the load to the siderails or siderail supports.
Page 192: Rear Storage Area
To prevent damage or loss of cargo while you are Your vehicle has a Center High-Mounted Stoplamp driving, check to make sure the luggage and (CHMSL) located above the rear glass. cargo are still securely fastened. If items are loaded on the roof of the vehicle, care Be sure the cargo is properly loaded.
Page 193: Cargo Cover
Cargo Cover To return the cover to the retracted position, do the following: 1. Pull up on the cover handle to release the CAUTION: cover posts from the retaining sockets. 2. Let the cover move forward to the full retracted position.
Page 194: Cargo Management System
4. Press the end caps in, this will allow the cover release lever located in the center of the grab to ﬁt into the trim slot. handle. This will engage and disengage a locator pin. This is used in adjusting and positioning 5.
Page 195 3. Lower the front rollers to the lower guides and 5. Push the system forward until all three sets of pull the system back until the middle set of rollers are resting on the guides and release rollers clear the upper guides. the lever to engage the locating pin into the hole.
Page 196 To access, pull the handle in the center of the Slide the hinge covers to the center of each side. system up. This will keep the sides of the storage system stationary and allow it to stay upright. Inside the system are two removable dividers.
Page 197: Sunroof
Sunroof Manual-Open/Manual-Close: To open the sunroof press and hold the rear of the driver’s side Your vehicle may be equipped with a power sliding switch until the sunroof reaches the desired sunroof. To open or close the sunroof, the ignition position.
Page 198 Express-Open/Express-Close: To express-open Vent: The sunroof has an express-vent open the sunroof, fully press and release the rear of feature. From the closed position, press the rear the driver’s side switch. The sunroof will open of the passenger’s side switch to vent the sunroof. automatically.
Page 199 Section 3 Instrument Panel Instrument Panel Overview ......202 Instrument Panel Brightness ...... 219 Hazard Warning Flashers ......204 Dome Lamps ..........220 Other Warning Devices ......204 Dome Lamp Override ........ 220 Horn ............205 Entry Lighting ..........220 Tilt Wheel ..........
Page 200 Section 3 Instrument Panel Warning Lights, Gages, and Indicators ..242 Oil Pressure Gage ........257 Instrument Panel Cluster ......243 Oil Pressure Light ........258 Speedometer and Odometer ...... 244 Security Light ..........259 Trip Odometer ........... 244 Fog Lamp Light ......... 259 Tachometer ..........
Page 201 Section 3 Instrument Panel Audio System(s) ......... 292 XM Radio Messages ......... 338 Setting the Time (MP3 Radio Navigation/Radio System ......340 with a Single CD Player) ......294 Rear Seat Entertainment System ....340 Setting the Time (MP3 Radio Rear Seat Audio (RSA) ......
Page 202: Instrument Panel Overview
Instrument Panel Overview United States version shown; Canada similar...
Page 203 A. Air Outlets. See Outlet Adjustment on M. Tilt Wheel Lever. See Tilt Wheel on page 205. page 238. N. Horn. See Horn on page 205. B. Turn Signal/Multifunction Lever. See Turn O. Audio Steering Wheel Controls. See Audio Signal/Multifunction Lever on page 206. Steering Wheel Controls on page 354.
Page 204: Hazard Warning Flashers
Hazard Warning Flashers The hazard warning ﬂashers work no matter what ignition position the key is in, and even if the The hazard warning ﬂashers warn others. They key is not in the ignition. also let police know you have a problem. Press the button to make the front and rear turn Your front and rear turn signal lamps will ﬂash on signal lamps ﬂash on and off.
Page 205: Horn
Horn To sound the horn, press the center pad on the steering wheel. Tilt Wheel Your vehicle has a tilt wheel, that lets you adjust the steering wheel before driving. Raising it to the highest level gives more room to exit and enter your vehicle.
Page 206: Turn Signal/Multifunction Lever
Turn Signal/Multifunction Lever (Windshield Wipers): See Windshield Wipers on page 208. ( Windshield Washer): See Windshield Washer on page 210. (Rear Wiper Delay): See Rear Window Wiper/Washer on page 211. (Rear Wiper): See Rear Window Wiper/Washer on page 211. (Rear Wiper Wash): See Rear Window Wiper/Washer on page 211.
Page 207: Turn And Lane-Change Signals
Turn and Lane-Change Signals As you signal a turn or a lane change, if the arrows ﬂash more quickly than normal, a signal The turn signal has two upward (for right) and bulb may be burned out and other drivers will not two downward (for left) positions.
Page 208: Headlamp High/Low-Beam Changer
Headlamp High/Low-Beam Changer lever toward you. The high-beam indicator on the instrument panel cluster will come on. Release the lever to return to normal operation. (Headlamp High/Low Beam Changer): To change the headlamps from low to high beam, push Windshield Wipers the lever toward the instrument panel.
Page 209: Rainsense™ Ii Wipers
To turn on the Rainsense™ feature, the wipers (Off): To stop the wipers, move the band must be set to one of the ﬁve delay settings on the to off. multifunction lever. Each of the ﬁve settings adjusts the sensitivity of the rainsensor. (Delay): The wiper speed can be set for a long or short delay between wiping cycles.
Page 210: Windshield Washer
Windshield Washer The button is located in the switchbank under the climate controls. CAUTION: In freezing weather, do not use your washer until the windshield is warmed. Push the heated washer ﬂuid button to activate Otherwise the washer ﬂuid can form ice the heated windshield washer ﬂuid system.
Page 211: Rear Window Wiper/Washer
Rear Window Wiper/Washer (Rear Wiper Delay): To turn on the rear wiper delay, slide the lever to this setting. (Rear Wiper): To turn on the rear wiper, slide CAUTION: the lever to this setting. (Rear Wiper Wash): To turn on the rear In freezing weather, do not use your wiper wash, push the button on the end of the turn washer until the windshield is warmed.
Page 212: Cruise Control
® Cruise Control If your vehicle has the StabiliTrak system and begins to limit wheel spin while you are using cruise control, the cruise control will automatically ® disengage. See StabiliTrak System on CAUTION: page 367. When road conditions allow you to safely use it again, you may turn the cruise control Cruise control can be dangerous where back on.
Page 213 + RES (Resume/Accelerate): Press this button to make the vehicle accelerate or resume to CAUTION: a previously set speed. SET − (Set/Coast): Press this button to set the If you leave your cruise control on when speed or make the vehicle decelerate. you are not using cruise, you might hit a button and go into cruise when you do not (Cancel): Press this button to cancel cruise...
Page 214 Resuming a Set Speed Reducing Speed While Using Cruise Control Suppose you set your cruise control at a desired speed and then you apply the brake. This To reduce your speed while using cruise control: shuts off the cruise control. But you do not need •...
Page 215: Exterior Lamps
Using Cruise Control on Hills Exterior Lamps How well your cruise control will work on hills The exterior lamps depends upon your speed, load, and the control is located on the steepness of the hills. When going up steep hills, instrument panel to the you may have to step on the accelerator pedal left of the steering wheel.
Page 216: Headlamps On Reminder
AUTO (Automatic): Turn the control to this A warning chime will sound if you open the driver’s position to automatically turn on the headlamps at door when the ignition switch is off and the normal brightness, together with the following: headlamps are on.
Page 217: Automatic Headlamp System
Automatic Headlamp System The DRL system will come on when the following conditions are met: When it is dark enough outside, the automatic • The ignition is on. headlamp system will turn on the headlamps at the • The exterior lamps control is in AUTO. normal brightness, along with the taillamps, sidemarker, parking lamps, and the instrument •...
Page 218: Fog Lamps
Fog Lamps There is a delay in the transition between the daytime and nighttime operation of the Daytime Running Lamps (DRL) and the automatic headlamp (Fog Lamps): If your vehicle has fog lamps, systems so that driving under bridges or bright the button is located on the instrument panel overhead street lights does not affect the system.
Page 219: Auxiliary Roof Mounted Lamp
Auxiliary Roof Mounted Lamp For further information on roof mount emergency lamp installation, please visit the GM Upﬁtter If your vehicle has this feature, this button includes website at www.gmupﬁtters.com or contact wiring provisions for a dealer or a qualiﬁed your dealer.
Page 220: Dome Lamps
Dome Lamps Exit Lighting The dome lamps come on when a door is opened. With exit lighting, the interior lamps will come on when the key is removed from the ignition. The dome lamps can also be turned on by They will turn off automatically in 20 seconds.
Page 221: Electric Power Management
Electric Power Management EPM works to prevent excessive discharge of the battery. It does this by balancing the generator’s The vehicle has Electric Power Management (EPM) output and the vehicle’s electrical needs. It that estimates the battery’s temperature and state can increase engine idle speed to generate more of charge.
Page 222: Ultrasonic Rear Parking Assist (Urpa)
Ultrasonic Rear Parking CAUTION: Assist (URPA) If your vehicle has the Ultrasonic Rear Parking The Ultrasonic Rear Park Assist (URPA) Assist (URPA) system it is designed to help system does not replace driver vision. you park while in Reverse (R). It operates only at URPA does not: speeds less than 5 mph (8 km/h).
Page 223 The URPA display is URPA can be turned off located near the by pressing the rear park passenger side rear aid disable button window and can located next to the radio. be seen by looking over The indicator light will your right shoulder.
Page 224 How the System Works when Backing When the System Does Not Seem to Work Properly If the shift lever is in REVERSE (R), URPA detects objects close to the rear bumper. The ﬁrst If the URPA system will not activate due to a time an object is detected a single beep will temporary condition, the message PARKING sound.
Page 225: Accessory Power Outlet(S)
• For Driver Information Center messages related to The ultrasonic sensors are not kept clean. So, URPA, see DIC Warnings and Messages on be sure to keep your vehicle’s rear bumper free page 272. of mud, dirt, snow, ice, and slush. For cleaning instructions, see Washing Your Vehicle on If the vehicle bumper is damaged, the URPA page 559.
Page 226 The accessory power outlets are powered, even Notice: Adding any electrical equipment to with the ignition off. Continuing to use power your vehicle may damage it or keep other outlets while the ignition is off may cause components from working as they should. The the vehicle’s battery to run down.
Page 227: Ashtray(S) And Cigarette Lighter
Ashtray(s) and Cigarette Lighter Climate Controls The front ashtray is located near the center of the Climate Control System instrument panel or on the front console, if equipped. Pull on the ashtray door to open it. With this system you can control the heating, Notice: If you put papers, pins, or other cooling, defrost, defog and ventilation of ﬂammable items in the ashtray, hot cigarettes...
Page 228 To change the current mode, select one of the By positioning the right knob between two modes, following: a combination of those two modes is selected. The air conditioning compressor will be on unless (Vent): This mode directs air to the instrument the outside temperature is close to freezing.
Page 229 The recirculation mode cannot be used with ﬂoor, (Air Conditioning): Press this button on the defrost, or defogging modes. If you try to select left knob to turn the air conditioning system on recirculation in one of those modes, the indicator or off.
Page 230 Rear Window Defogger (Defog): The defog mode is used to clear the windows of fog or moisture and warm the The rear window defogger uses a warming grid to passengers. This mode directs air to the remove fog from the rear window. windshield, ﬂoor outlets, and side window vents.
Page 231: Dual Automatic Climate Control System
Dual Automatic Climate Driver’s Side Temperature Control Control System The driver’s side temperature buttons are used to adjust the temperature of the air coming through With this system, you can control the heating, the system on the driver’s side. The temperature cooling, and ventilation in your vehicle.
Page 232 Passenger’s Side Temperature Control Automatic Operation The passenger’s temperature buttons can be used AUTO (Automatic): When automatic operation is to change the temperature of the air coming active the system will control the inside through the system on the passenger’s side of the temperature, the air delivery, and the fan speed.
Page 233 2. Set the driver’s and passenger’s temperature. To avoid blowing cold air in cold weather, the system will delay turning on the fan until warm air To ﬁnd your comfort setting, start with a 74°F is available. The length of delay depends on (23°C) temperature setting and allow about the engine coolant temperature.
Page 234 Manual Operation The air delivery mode setting will be displayed and the AUTO light will turn off. The fan will remain You may manually adjust the air delivery mode or under automatic control. fan speed. (Vent): This setting will deliver air to the y9 z (Fan): The buttons with the fan symbols instrument panel outlets.
Page 235: Air Conditioning
Air Conditioning (Recirculation): Press this button to turn the recirculation mode on. When the button is (Air Conditioning): Press this button to turn pressed, an indicator light will come on. the air conditioning (A/C) compressor on and This mode keeps outside air from entering the off.
Page 236 Sensors The interior temperature sensors located in the headliner above the driver side seat and in the The solar sensor, located in the defrost grille in headliner above the second row seats measure the the middle of the instrument panel, monitors temperature of the air inside your vehicle.
Page 237 The climate control system uses the information When you select this mode, the system turns off from these sensors to maintain your comfort recirculation and runs the air conditioning setting by adjusting the outlet temperature, fan compressor unless the outside temperature is speed, and the air delivery mode.
Page 238: Outlet Adjustment
Rear Window Defogger Outlet Adjustment The rear window defogger uses a warming grid to Use the air outlets located in the center and on the remove fog from the rear window. side of your instrument panel to direct the airﬂow. <...
Page 239: Rear Air Conditioning And Heating System
Rear Air Conditioning and Heating System If your vehicle has this system, the rear controls are three knobs located in the headliner. The system can be controlled from the front controls as well as the rear controls. To turn the system on, press the AUX button on the front climate control system, an indicator will be lit.
Page 240: Rear Air Conditioning And Heating System And Electronic Climate Controls
Mode Knob Rear Air Conditioning and Heating System and Electronic Climate The right knob on the control panel allows you to choose the direction of air delivery. Controls (Vent): This setting directs the air through the If your vehicle has this system, the rear heat and headliner outlets.
Page 241 The display will only indicate climate control functions when the system is in rear independent mode. Manual Operation y9 z (Fan): The fan buttons on the rear seat audio control panel allows you to manually adjust the fan speed. To decrease airﬂow, press the button with the fan and down arrow symbol.
Page 242: Warning Lights, Gages, And Indicators
Warning Lights, Gages, and Gages can indicate when there may be or is a problem with one of your vehicle’s functions. Often Indicators gages and warning lights work together to let you know when there is a problem with your This part describes the warning lights and gages on vehicle.
Page 243: Instrument Panel Cluster
Instrument Panel Cluster United States version shown. Canada similar. Your instrument cluster is designed to let you know at a glance how your vehicle is running. You will know how fast you are going, about how much fuel you have and many other things you will need to know to drive safely and economically.
Page 244: Speedometer And Odometer
Speedometer and Odometer Tachometer Your speedometer lets you see your speed in Your tachometer displays the engine speed in both miles per hour (mph) and kilometers per revolutions per minute (rpm). hour (km/h). Safety Belt Reminder Light Your odometer shows how far your vehicle has been driven, in either miles (used in the United When the key is turned to RUN or START, a States) or kilometers (used in Canada).
Page 245: Passenger Safety Belt Reminder Light
Passenger Safety Belt Airbag Readiness Light Reminder Light There is an airbag readiness light on the instrument panel, which shows the airbag symbol. Several seconds after the key is turned to RUN or The system checks the airbag’s electrical START, a chime will sound for several seconds system for malfunctions.
Page 246: Passenger Airbag Status Indicator
Passenger Airbag Status Indicator Then the light should go out. This means the system is ready. Your vehicle has the passenger sensing system. Your overhead console has a passenger airbag CAUTION: status indicator. If the airbag readiness light stays on after you start your vehicle, it means the airbag system may not be working properly.
Page 247 If the word ON or the on symbol is lit on the Your vehicle has a rear seat that will accommodate passenger airbag status indicator, it means that a rear-facing child restraint. A label on your sun the right front passenger’s frontal airbag is enabled visor says, “Never put a rear-facing child seat (may inﬂate).
Page 248: Charging System Light
Charging System Light If, after several seconds, all status indicator lights remain on, or if there are no lights at all, there may be a problem with the lights or the passenger The charging system sensing system. See your dealer for service. light will come on brieﬂy when you turn on the ignition, but the...
Page 249: Voltmeter Gage
Voltmeter Gage Readings in the low warning zone may occur when a large number of electrical accessories are operating in the vehicle and the engine is left at When your engine is not an idle for an extended period. This condition running, but the ignition is normal since the charging system is not able to is in RUN, this gage...
Page 250: Brake System Warning Light
Brake System Warning Light This light should come on brieﬂy when you turn the ignition key to RUN. If it does not come With the ignition on, the brake system warning on then, have it ﬁxed so it will be ready to warn light will come on when you set the parking brake.
Page 251: Anti-Lock Brake System Warning Light
Anti-Lock Brake System If the light stays on, or comes on when you are driving, your vehicle needs service. A chime Warning Light will sound when the light stays on. If the regular brake system warning light is not on, you still have With the Anti-Lock Brake brakes, but you do not have ABS.
Page 252: Stabilitrak ® Indicator Light
® StabiliTrak Indicator Light Engine Coolant Temperature Gage If equipped, this warning light should come on brieﬂy when the engine is started. If the warning light does not come on then, have it ﬁxed so it will be ready to warn you if there is a United States Canada problem.
Page 253: Tire Pressure Light
Tire Pressure Light If your vehicle has a Driver Information Center (DIC), a CHECK TIRE PRESSURE DIC message will accompany the light. See DIC Warnings This light will come on and Messages on page 272 for more information. brieﬂy when you turn the ignition to RUN.
Page 254: Malfunction Indicator Lamp
Malfunction Indicator Lamp Notice: If you keep driving your vehicle with this light on, after awhile, the emission controls Check Engine Light might not work as well, your vehicle’s fuel economy might not be as good, and the engine might not run as smoothly. This could lead Your vehicle has a to costly repairs that might not be covered by computer which...
Page 255 If the Light is Flashing This light should come on, as a check to show you it is working, when the ignition is on and the The following may prevent more serious damage engine is not running. If the light does not to your vehicle: come on, have it repaired.
Page 256 If the Light Is On Steady Have you recently changed brands of fuel? If so, be sure to fuel your vehicle with quality fuel. You may be able to correct the emission system See Gasoline Octane on page 453. Poor fuel malfunction by considering the following: quality will cause your engine not to run as Did you recently put fuel into your vehicle?
Page 257: Oil Pressure Gage
Emissions Inspection and Maintenance Oil Pressure Gage Programs Some state/provincial and local governments have or may begin programs to inspect the emission control equipment on your vehicle. Failure to pass this inspection could prevent you from getting a vehicle registration. Here are some things you need to know to help your vehicle pass an inspection: Your vehicle will not pass this inspection if the...
Page 258: Oil Pressure Light
Oil Pressure Light A reading in the low pressure zone may be caused by a dangerously low oil level or some other problem causing low oil pressure. Check This light will come on your oil as soon as possible. brieﬂy when you start your engine.
Page 259: Security Light
Fog Lamp Light Notice: Lack of proper engine oil maintenance may damage the engine. The repairs would not be covered by your warranty. Always follow The fog lamp light will the maintenance schedule in this manual for come on when the fog changing engine oil.
Page 260: Highbeam On Light
Highbeam On Light Fuel Gage This light comes on when the high-beam headlamps are in use. See Headlamp High/Low-Beam Changer on page 208 for more information. United States Canada Tow/Haul Mode Light The fuel gage, when the ignition is on, tells you about how much fuel you have left in your tank.
Page 261: Low Fuel Warning Light
Low Fuel Warning Light When the fuel tank is low, the FUEL LEVEL LOW message will appear in the Driver Information Center (DIC). See DIC Warnings and Messages This light, under the fuel on page 272 for more information. gage, will come on brieﬂy when you Here are some situations you may experience with are starting the engine.
Page 262: Driver Information Center (Dic)
Driver Information Center (DIC) DIC Operation and Displays (With DIC Buttons) Your vehicle has a Driver Information Center (DIC). If your vehicle has DIC buttons, the information below explains the operation of this system. The DIC displays information about your vehicle. It also displays warning messages if a system The DIC has different displays which can be problem is detected.
Page 263 DIC Buttons (Vehicle Information): Press this button to display the oil life, units, tire pressure readings The buttons are the for vehicles with a Tire Pressure Monitor (TPM) trip/fuel, vehicle system, engine hours, Tire Pressure Monitor information, (TPM) system programming for vehicles with a customization, and TPM system, and Remote Keyless Entry set/reset buttons.
Page 264 Trip/Fuel Menu Items The trip odometer has a feature called the retro-active reset. This can be used to set the trip (Trip/Fuel): Press this button to scroll odometer to the number of miles (kilometers) driven since the ignition was last turned on. This through the following menu items: can be used if the trip odometer is not reset at the Odometer...
Page 265 Fuel Range Average Economy Press the trip/fuel button until FUEL RANGE Press the trip/fuel button until AVG ECONOMY displays. This display shows the approximate displays. This display shows the approximate number of remaining miles (mi) or kilometers (km) average miles per gallon (mpg) or liters per the vehicle can be driven without refueling.
Page 266 Timer Instantaneous Economy and Active Fuel Management™ Indicator Press the trip/fuel button until TIMER displays. This display can be used as a timer. If your vehicle has this display, press the trip/fuel button until INST ECONOMY V8 MODE displays. To start the timer, press the set/reset button while This display shows the current fuel economy at a TIMER is displayed.
Page 267 Vehicle Information Menu Items Remember, you must reset the OIL LIFE display yourself after each oil change. It will not reset (Vehicle Information): Press this button to itself. Also, be careful not to reset the OIL LIFE display accidentally at any time other than scroll through the following menu items: when the oil has just been changed.
Page 268 Relearn Remote Key If a low or high tire pressure condition is detected by the system while driving, a message advising This display allows you to match Remote Keyless you to check the pressure in a speciﬁc tire Entry (RKE) transmitters to your vehicle. To match will appear in the display.
Page 269: Dic Operation And Displays (Without Dic Buttons)
DIC Operation and Displays Trip Odometer Reset Stem Menu Items Odometer (Without DIC Buttons) Press the trip odometer reset stem until If your vehicle does not have DIC buttons, the ODOMETER displays. This display shows the information below explains the operation of distance the vehicle has been driven in either this system.
Page 270 Oil Life The trip odometer has a feature called the retro-active reset. This can be used to set the trip To access this display, the vehicle must be in odometer to the number of miles (kilometers) PARK (P). Press the trip odometer reset stem until driven since the ignition was last turned on.
Page 271 Relearn Remote Key Remember, you must reset the OIL LIFE display yourself after each oil change. It will not reset To access this display, the vehicle must be in itself. Also, be careful not to reset the OIL LIFE PARK (P). This display allows you to match display accidentally at any time other than Remote Keyless Entry (RKE) transmitters to your when the oil has just been changed.
Page 272: Dic Warnings And Messages
Language DIC Warnings and Messages This display allows you to select the language in Messages are displayed on the DIC to notify the which the DIC messages will appear. To select driver that the status of the vehicle has changed a language, do the following: and that some action may be needed by the driver 1.
Page 273 CHANGE ENGINE OIL SOON Have the tire pressures checked and set to those shown on the Tire Loading Information label. This message displays when the engine oil needs See Tires on page 510, Loading Your Vehicle on to be changed. When you change the engine page 411, and Inﬂation - Tire Pressure on oil, be sure to reset the CHANGE ENGINE OIL page 518.
Page 274 ENGINE HOT A/C (Air Conditioning) ENGINE OVERHEATED IDLE ENGINE TURNED OFF Notice: If you drive your vehicle while the engine is overheating, severe engine damage This message displays when the engine coolant may occur. If an overheat warning appears becomes hotter than the normal operating on the instrument panel cluster and/or temperature.
Page 275 ENGINE OVERHEATED STOP ENGINE This message also displays when the vehicle’s engine power is reduced. Reduced engine power Notice: If you drive your vehicle while the can affect the vehicle’s ability to accelerate. If this engine is overheating, severe engine damage message is on, but there is no reduction in may occur.
Page 276 LEFT REAR DOOR OPEN PARK ASSIST OFF This message displays and a chime sounds if the If your vehicle has the Ultrasonic Rear Parking driver’s side rear door is not fully closed and Assist (URPA) system, after the vehicle has been the vehicle is in a drive gear.
Page 277 REMOTE KEY LEARNING ACTIVE SERVICE 4 WHEEL DRIVE This message displays while you are matching a This message displays if a problem occurs with Remote Keyless Entry (RKE) transmitter to the four-wheel-drive system. If this message your vehicle. See “Matching Transmitter(s) to Your appears, stop as soon as possible and turn off the Vehicle”...
Page 278 SERVICE BATTERY CHARGING SERVICE BRAKES SOON SYSTEM This message displays if there is a problem with the brake system. If this message appears, stop as On some vehicles, this message displays if there soon as possible and turn off the vehicle. Restart is a problem with the battery charging system.
Page 279 SERVICE STABILITRAK SERVICE THEFT DETERRENT SYSTEM ® If your vehicle has StabiliTrak and this message This message displays when there is a problem displays, it means there may be a problem with the theft-deterrent system. The vehicle may or ® with the StabiliTrak system.
Page 280 SERVICE TRACTION CONTROL There are several conditions that can cause this message to appear. ® If your vehicle has StabiliTrak , this message • One condition is overheating, which could displays when there is a problem with the Traction ® occur if StabiliTrak activates continuously Control System (TCS).
Page 281 TIGHTEN GAS CAP TRACTION CONTROL OFF ® This message may display along with the check If your vehicle has StabiliTrak , this message engine light on the instrument panel cluster if displays when the Traction Control System (TCS) the vehicle’s fuel cap is not tightened properly. See is turned off.
Page 282: Dic Vehicle Customization (With Dic Buttons)
TURN SIGNAL ON DIC Vehicle Customization (With DIC Buttons) This message displays and a chime sounds if a turn signal is left on for 3/4 of a mile (1.2 km). Your vehicle may have customization capabilities Move the turn signal/multifunction lever to the that allow you to program certain features to off position.
Page 283 Entering the Feature Settings Menu DISPLAY LANGUAGE This feature allows you to select the language in 1. Turn the ignition on and place the vehicle in which the DIC messages will appear. PARK (P). To avoid excessive drain on the battery, it is Press the customization button until the DISPLAY recommended that the headlamps are LANGUAGE screen appears on the DIC display.
Page 284 AUTO DOOR LOCK AUTO DOOR UNLOCK This feature allows you to select when the This feature allows you to select whether or not to vehicle’s doors will automatically lock. See turn off the automatic door unlocking feature. It Programmable Automatic Door Locks on page 128 also allows you to select which doors and for more information.
Page 285 NO CHANGE: No change will be made to this LIGHTS ONLY: The exterior lamps will ﬂash feature. The current setting will remain. when you press the lock button on the RKE transmitter. Choose one of the available settings and press the set/reset button while it is displayed on the DIC HORN ONLY: The horn will sound on the second to select it.
Page 286 REMOTE DOOR UNLOCK NO CHANGE: No change will be made to this feature. The current setting will remain. This feature allows you to select the type of Choose one of the available settings and press feedback you will receive when unlocking the the set/reset button while it is displayed on the DIC vehicle with the Remote Keyless Entry (RKE) to select it.
Page 287 EXIT LIGHTING Press the customization button until DELAY DOOR LOCK appears on the DIC display. Press This feature allows you to select the amount of the set/reset button once to access the settings time you want the exterior lamps to remain for this feature.
Page 288 APPROACH LIGHTING NO CHANGE: No change will be made to this feature. The current setting will remain. This feature allows you to select whether or not to Choose one of the available settings and press have the exterior lights turn on brieﬂy during the set/reset button while it is displayed on the DIC low light periods after unlocking the vehicle using to select it.
Page 289 PARK TILT MIRRORS BOTH MIRRORS: The driver’s and passenger’s outside mirrors will be tilted down when the vehicle If your vehicle has this feature, it allows you to is shifted into REVERSE (R). select whether or not the outside mirror(s) will automatically tilt down when the vehicle is NO CHANGE: No change will be made to this shifted into REVERSE (R).
Page 290 The automatic easy exit seat movement will only Press the customization button until MEMORY occur one time after the key is removed from SEAT RECALL appears on the DIC display. Press the ignition. If the automatic movement has already the set/reset button once to access the settings occurred, and you put the key back in the for this feature.
Page 291 REMOTE START FACTORY SETTINGS If your vehicle has this feature, it allows you to This feature allows you to set all of the turn the remote start off or on. The remote customization features back to their factory default start feature allows you to start the engine from settings.
Page 292: Audio System(S)
EXIT FEATURE SETTINGS Audio System(s) This feature allows you to exit the feature Determine which radio your vehicle has and then settings menu. read the pages following to familiarize yourself with its features. Press the customization button until PRESS EXIT FEATURE SETTINGS appears in the DIC Driving without distraction is a necessity for a display.
Page 293 Notice: Before adding any sound equipment to your vehicle, such as an audio system, CD CAUTION: player, CB radio, mobile telephone, or two-way radio, make sure that it can be added by This system provides you with a far greater checking with your dealer/retailer.
Page 294: Setting The Time (Mp3 Radio With A Single Cd Player)
Setting the Time (MP3 Radio with a Changing the Time and Date Default Settings Single CD Player) You can change the time default setting from If your vehicle has a radio with a single CD, the 12 hours to 24 hours or change the date default radio has a clock button for setting the time setting from month/day/year to day/month/year.
Page 295: Setting The Time
Setting the Time (MP3 Radio with a Changing the Time and Date Default Settings CD and DVD Player) You can change the time default setting from If your vehicle has a radio with a single CD and 12 hours to 24 hours or change the date default DVD player, the radio has a clock button for setting setting from month/day/year to day/month/year.
Page 296: Setting The Time (Mp3 Radio With A Six-Disc Cd Player)
Setting the Time (MP3 Radio with a Changing the Time and Date Default Settings Six-Disc CD Player) You can change the time default setting from If your vehicle has a radio with a six-disc CD 12 hours to 24 hours or change the date default player, the radio has a MENU button instead of setting from month/day/year to day/month/year.
Page 297: Radio With Cd (Mp3)
Radio with CD (MP3) name or call letters display. In rare cases, a radio station could broadcast incorrect information that causes the radio features to work improperly. If this happens, contact the radio station. XM™ Satellite Radio Service XM™ is a satellite radio service that is based in the 48 contiguous United States and Canada.
Page 298 © ¨ Speed Compensated Volume (SCV): The radio SEEK : Press the right or left SEEK arrow has Speed Compensated Volume (SCV). While to go to the next or to the previous station and SCV is on, the radio volume automatically adjusts stay there.
Page 299 Storing a Radio Station as a Favorite 3. Press and hold one of the six pushbuttons until a beep sounds. Whenever that Drivers are encouraged to set up their radio station pushbutton is pressed and released, the favorites while the vehicle is parked. Tune to station that was set, returns.
Page 300 Setting the Tone EQ (Equalization): Press this button to choose bass and treble equalization settings designed for (Bass/Midrange/Treble) different types of music. The choices are pop, rock, country, talk, jazz, and classical. Selecting BASS/MID/TREB (Bass, Midrange, or MANUAL or changing bass or treble, returns Treble): To adjust bass, midrange, or treble, the EQ to the manual bass and treble settings.
Page 301 To quickly adjust balance or fade to the middle 3. Turn the tune knob, press the buttons below position, press the pushbutton positioned under the the right or left arrows displayed, or press the BAL or FADE label for more than two seconds. A right or left SEEK buttons to go to the next beep sounds and the level adjusts to the middle or previous XM™...
Page 302 Playing a CD (Single CD Player) Removed categories can be restored by pressing the pushbutton under the Add label when a Insert a CD partway into the slot, label side up. The removed category displays or by pressing the player pulls it in and the CD should begin playing. pushbutton under the Restore All label.
Page 303 If the ignition or radio is turned off, with a CD in the bottom surface of the CD. If the surface of the CD player, it stays in the player. While the ignition or is damaged, such as cracked, broken, or radio is turned on, the CD starts playing where it scratched, the CD will not play properly.
Page 304 © ¨ If an error displays, see “CD Messages” later in SEEK : Press the left SEEK arrow to this section. go to the start of the current track, if more than ten seconds on the CD have played. Press EJECT: Press the CD eject button to eject the right SEEK arrow to go to the next track.
Page 305 RDM (Random): With the random setting, the BAND: Press this button to listen to the radio tracks can be listened to in random, rather when a CD is playing. The CD remains inside the than sequential order, on one CD or all CDs in a radio for future listening.
Page 306 CD Messages Using the Auxiliary Input Jack The radio system has an auxiliary input jack CHECK DISC: If this message displays and/or located on the lower right side of the faceplate. the CD comes out, it could be for one of the This is not an audio output;...
Page 307: Radio With Cd And Dvd (Mp3)
Radio with CD and DVD (MP3) (Power/Volume): Turn this knob clockwise or counterclockwise to increase or decrease the volume of the portable player. Additional volume adjustments might be needed from the portable device if the volume does not go loud or soft enough.
Page 308 XM™ Satellite Radio Service The DVD player is the top slot on the radio faceplate. The player is capable of reading the XM™ is a satellite radio service that is based in DTS programmed DVD Audio or DVD Video the 48 contiguous United States and Canada. media, (DTS and DTS Digital Surround are XM™...
Page 309 © ¨ Speed Compensated Volume (SCV): The radio SEEK : Press the left or right SEEK arrow has Speed Compensated Volume (SCV). While to go to the next or to the previous station and SCV is on, the radio volume automatically adjusts stay there.
Page 310 Storing a Radio Station as a Favorite 3. Press and hold one of the six pushbuttons until a beep sounds. Whenever that Drivers are encouraged to set up their radio station pushbutton is pressed and released, the favorites while the vehicle is parked. Tune to station that was set, returns.
Page 311 Setting the Tone Unique EQ settings can be saved for each source. (Bass/Midrange/Treble) ® If the radio has a Bose audio system, the EQ settings are either MANUAL or TALK. BASS/MID/TREB (Bass, Midrange, or Treble): To Adjusting the Speakers (Balance/Fade) adjust bass, midrange, or treble, press the tune knob until the tone control labels display.
Page 312 Finding a Category (CAT) Station Undesired XM™ categories can be removed through the setup menu. To remove an undesired CAT (Category): The CAT button is used to ﬁnd category, perform the following: XM™ stations when the radio is in the XM™ 1.
Page 313 Radio Messages Playing a CD (In Either the DVD or CD Slot) Calibration Error: The audio system has been calibrated for your vehicle from the factory. If Insert a CD partway into the slot, label side up. Calibration Error displays, it means that the radio The player pulls it in and the CD should begin has not been conﬁgured properly for your vehicle playing (loading a disc into the system, depending...
Page 314 If playing a CD-R, the sound quality can be Do not add any label to a CD. It could get caught reduced due to CD-R quality, the method of in the CD player. If a CD is recorded on a recording, the quality of the music that has been personal computer and a description label is recorded, and the way the CD-R has been...
Page 315 DVD (Eject): Press and release the DVD REV (Reverse): Press and hold this button eject button to eject the CD that is currently playing to reverse playback quickly within a track. Sound is in the top slot. A beep sounds and Ejecting Disc heard at a reduced volume.
Page 316 Audio Output DVD/CD AUX (Auxiliary): Press this button to cycle through DVD, CD, or Auxiliary when listening Only one audio source can be heard through the to the radio. The DVD/CD text label and a speakers at one time. An audio source is message showing the track or chapter number deﬁned as DVD slot, CD slot, XM™, FM/AM, displays when a disc is in either slot.
Page 317 Playing an MP3/WMA CD-R or • The air is very humid. If so, wait about an hour and try again. CD-RW Disc • There could have been a problem while A radio with CD and DVD has the capability of burning the CD.
Page 318 The DVD slot of the radio is compatible with most If a front auxiliary device is connected, the audio CDs, CD-R, CD-RW, DVD-Video, DVD/CD AUX button cycles through all available DVD-Audio, DVD-R/RW, DVD+R/RW media along options, such as: DVD slot, CD slot, Front with MP3 and WMA formats.
Page 319 (Tune): Turn this knob to change tracks on a FWD (Fast Forward): Press this button to CD or DVD, to manually tune a radio station, or to fast forward the CD or DVD. The radio displays the change clock or date settings, while in the clock elapsed time and fast forwards ﬁve times the or date setting mode.
Page 320 DVD-V (Video) Display Buttons the movie automatically, press the pushbutton located under the play/pause symbol tag displayed Once a DVD-V is inserted, the radio display menu on the radio. If the DVD still does not play, refer shows several tag options for DVD playing. to the on-screen instructions, if available.
Page 321 DVD-A (Audio) Display Buttons Nav (Navigate): Press this button to display directional arrows for navigating through Once a DVD-A is inserted, radio display menu the menus. shows several tag options for DVD playing. Press (Audio Stream): Press this button to cycle the pushbuttons located under any desired tag through audio stream formats located on the option during DVD playback.
Page 322 Stopping and Resuming Playback The radio does not resume play of the disc automatically. If the RSA system is sourced to the To stop playing a DVD without turning off the DVD, the movie when reloaded into the DVD system, press the stop button on the remote player begins to play again.
Page 323 Using the Auxiliary Input Jack(s) To listen to a device through the rear auxiliary input over the speakers, cycle the DVD/CD Aux button The radio system has an auxiliary input jack on the radio faceplate until “Rear Aux Input” located on the lower right side of the faceplate. displays on the radio.
Page 324: Using An Mp3 (Radio With Cd Or Six-Disc Cd Player)
Using an MP3 (Radio with CD or DVD/CD AUX (CD/Auxiliary): Press this button to cycle through DVD, CD, or Auxiliary when listening Six-Disc CD Player) to the radio. The DVD/CD text label and a message showing track or chapter number displays when a MP3/WMA CD-R or CD-RW Disc disc is in either slot.
Page 325 MP3/WMA Format • Minimize the length of the ﬁle, folder, or playlist names. Long ﬁle, folder, or playlist names, or a If you burn your own MP3/WMA disc on a combination of a large number of ﬁles and personal computer: folders, or playlists can cause the player to be •...
Page 326 Root Directory When the CD-R or CD-RW contains only playlists and compressed audio ﬁles, but no folders, all The root directory of the CD-R or CD-RW is ﬁles are located under the root folder. The folder treated as a folder. If the root directory has down and the folder up buttons search playlists compressed audio ﬁles, the directory is displayed (Px) ﬁrst and then goes to the root folder.
Page 327 File System and Naming If the ignition or radio is turned off with a CD-R or CD-RW in the player, it stays in the player. The song name that displays is the song name When the ignition or radio is turned on, the CD-R that is contained in the ID3 tag.
Page 328 If there is no apparent damage, try a known several seconds, the CD-R or CD-RW automatically good CD. pulls back into the player and begins playing. For the Six-Disc CD player, press and hold the eject Notice: If a label is added to a CD, or more button for two seconds to eject all discs.
Page 329 FWD (Fast Forward): Press and hold this (Music Navigator): Use the music navigator button to advance playback quickly within an feature to play MP3/WMA ﬁles on the CD-R or MP3/WMA ﬁle. Sound is heard at a reduced CD-RW in order by artist or album. Press volume.
Page 330: Using An Mp3 (Radio With Cd And Dvd Player)
To change from playback by artist to playback by CD/AUX (CD/Auxiliary): Press this button to play album, press the pushbutton located below the a CD when listening to the radio. The CD icon and a Sort By label. From the sort screen, push one of message showing disc and/or track number the buttons below the album button.
Page 331 MP3/WMA Format • Make sure playlists have a .m3u, .wpl or .pls extension as other ﬁle extensions may If you burn your own MP3/WMA disc on a not work. personal computer: • Minimize the length of the ﬁle, folder or playlist •...
Page 332 Empty Directory or Folder Order of Play If a root directory or a folder exists somewhere in Tracks recorded to the CD-R or CD-RW are the ﬁle structure that contains only played in the following order: folders/subfolders and no compressed ﬁles directly •...
Page 333 File System and Naming Playing an MP3/WMA (In Either the DVD or CD Slot) The song name that is displayed is the song name that is contained in the ID3 tag. If the song Insert a CD-R or CD-RW partway into either the name is not present in the ID3 tag, then the radio top or bottom slot, label side up.
Page 334 If playing a CD-R or CD-RW, the sound quality Do not add any label to a CD. It could get caught can be reduced due to CD-R or CD-RW quality, in the CD player. If a CD is recorded on a the method of recording, the quality of the personal computer and a description label is music that has been recorded, and the way the...
Page 335 DVD (Eject): Press and release the (Previous Folder): Press the pushbutton button to eject the CD-R or CD-RW that is currently positioned under the Folder label to go to the playing in the top slot. A beep sounds and Ejecting ﬁrst track in the previous folder.
Page 336 RDM (Random): With the random setting, Once the disc has been scanned, the player MP3/WMA ﬁles on the CD-R or CD-RW can be defaults to playing MP3/WMA ﬁles in order by artist. listened to in random, rather than sequential order. The current artist playing is shown on the second To play MP3/WMA ﬁles from the CD-R or line of the display between the arrows.
Page 337 BAND: Press this button to listen to the radio two sources and not indicate “No Aux Input when a CD or a DVD is playing. The CD or DVD Device”. If a front auxiliary device is connected, remains inside the radio for future listening or the DVD/CD AUX button cycles through all viewing entertainment.
Page 338: Xm Radio Messages
XM Radio Messages Radio Display Message Condition Action Required XL (Explicit Language XL on the radio display, These channels, or any others, can be blocked at a Channels) after the channel name, customer’s request, by calling 1-800-852-XMXM (9696). indicates content with explicit language.
Page 339 Radio Display Message Condition Action Required No CAT Info Category Name No category information is available at this time on this not available channel. The system is working properly. No Information No Text/Informational No text or informational messages are available at this time message available on this channel.
Page 340: Navigation/Radio System
Navigation/Radio System Before You Drive The RSE is designed for rear seat passengers Your vehicle may have a navigation radio system. only. The driver cannot safely view the video The navigation system has built-in features screen while driving and should not try to do so. intended to minimize driver distraction.
Page 341 Headphones To enable Parental Control, press and hold the radio power button for more than two seconds. If on, the radio, video screen, and RSA turns off. If a DVD and/or CD is playing, it stops. While Parental Control is on, either a padlock icon or a text message comes on, depending on the radio.
Page 342 Push the power button to turn on the headphones. For optimal audio performance, the headphones An indicator light located on the headphones must be worn correctly. The symbol L (Left) comes on. If the light does not come on, appears on the upper left side, above the ear pad the batteries may need to be replaced.
Page 343 Battery Replacement Audio/Video (A/V) Jacks To change the batteries on the headphones, do the following: 1. Turn the screw with a coin or screw driver to loosen the battery door located on the left side of the headphones. Slide the battery door open.
Page 344 How to Change the RSE Video Screen Power for auxiliary devices is not supplied by the radio system. Settings To use the auxiliary inputs of the RSE system, The screen display mode (normal, full, and zoom), connect an external auxiliary device to the screen brightness, and setup menu language color-coded A/V jacks and turn both the auxiliary can be changed from the on screen setup menu.
Page 345 Audio Output Video Screen Audio from the DVD player or auxiliary inputs may The video screen is located in the RSE overhead be heard through the following possible sources: console. • Wireless Headphones To use the video screen, do the following: •...
Page 346 Remote Control Remote Control Buttons To use the remote control, aim it at the transmitter window at the rear of the RSE overhead console and press the desired button. Direct sunlight or very bright light could affect the ability of the RSE transmitter to receive signals from the remote control.
Page 347 (Main Menu): Press this button to access the (Stop): Press this button to stop playing, DVD menu. The DVD menu is different on rewinding, or fast forwarding a DVD. Press this every DVD. Use the up, down, left, and right arrow button twice to return to the beginning of the DVD.
Page 348 (Previous Track/Chapter): Press this button (Fast Forward): Press this button to fast to return to the start of the current track or forward the DVD or CD. To stop fast forwarding a chapter. Press this button again to go to the DVD video, press the play button.
Page 349 Battery Replacement AUX (Auxiliary): Press this button to switch the system between the DVD player and an auxiliary To change the remote control batteries, do the source. following: (Camera): Press this button to change camera 1. Remove the battery compartment door angles on DVDs that have this feature when a located on the bottom of the remote control.
Page 350 Problem Recommended Action Problem Recommended Action No power. The ignition might not be The auxiliary source is Check that the RSE video turned on or in accessory. running but there is no screen is in the auxiliary picture or sound. source mode.
Page 351 DVD Display Error Messages DVD Distortion The DVD display error message depends on Video distortion may occur when operating cellular which radio you have. The video screen may phones, scanners, CB radios, Global Position display one of the following: Systems (GPS)*, two-way radios, mobile fax, or walkie talkies.
Page 352: Rear Seat Audio (Rsa)
Rear Seat Audio (RSA) This feature allows rear seat passengers to listen to and control any of the music sources: radio, CDs, DVDs, or other auxiliary sources. However, the rear seat passengers can only control the music sources the front seat passengers are not listening to (except on some radios where dual control is allowed).
Page 353 © ¨ PROG (Program): Press this button to go to the (Seek): When listening to FM, AM, or XM next preset radio station or channel set on the (if equipped), press the seek up or the seek main radio. This function is inactive, with down arrow to go to the next or the previous some radios, if the front seat passengers are station or channels and stay there.
Page 354: Theft-Deterrent Feature
Theft-Deterrent Feature When a CD/DVD is playing, press the up or the down arrow to go to the next or previous track or ® THEFTLOCK is designed to discourage theft of chapter. your vehicle’s radio. The feature works (Mute/Voice Recognition): Press and release automatically by learning a portion of the Vehicle this button to silence the vehicle speakers only.
Page 355: Radio Reception
SRCE (Source): Press this button to switch between the radio (AM, FM), XM™ (if equipped), The range for most AM stations is greater than for CD, and if your vehicle has these features, FM, especially at night. The longer range can cause DVD, front auxiliary, and rear auxiliary.
Page 356: Care Of Your Cds And Dvds
XM™ Satellite Radio Service Do not touch the bottom side of a CD while handling it; this could damage the surface. Pick up XM™ Satellite Radio Service gives digital radio CDs by grasping the outer edges or the edge of reception from coast-to-coast in the 48 contiguous the hole and the outer edge.
Page 357: Xm™ Satellite Radio Antenna System
XM™ Satellite Radio Antenna Notice: Do not apply aftermarket glass tinting with metallic ﬁlm. The metallic ﬁlm in some System tinting materials will interfere with or distort the incoming radio reception. Any damage caused The XM™ Satellite Radio antenna is located on to your antenna due to metallic tinting materials the roof of your vehicle.
Page 358 ✍ NOTES...
Page 359: Driving Your Vehicle
Section 4 Driving Your Vehicle Your Driving, the Road, and Your Vehicle ..360 Before Leaving on a Long Trip ....401 Defensive Driving ........360 Highway Hypnosis ........402 Drunken Driving ........361 Hill and Mountain Roads ......403 Control of a Vehicle ........
Page 360: Your Driving, The Road, And Your Vehicle
Your Driving, the Road, and CAUTION: Your Vehicle Defensive driving really means “Be ready Defensive Driving for anything.” On city streets, rural roads, The best advice anyone can give about driving is: or expressways, it means “Always expect Drive defensively. the unexpected.”...
Page 361: Drunken Driving
Drunken Driving Many adults — by some estimates, nearly half the adult population — choose never to drink Death and injury associated with drinking and alcohol, so they never drive after drinking. driving is a national tragedy. It is the number one For persons under 21, it is against the law in contributor to the highway death toll, claiming every U.S.
Page 362 According to the American Medical Association, a It is the amount of alcohol that counts. For example, 180 lb (82 kg) person who drinks three 12 ounce if the same person drank three double martinis (355 ml) bottles of beer in an hour will end up with (3 ounces or 90 ml of liquor each) within an hour, a BAC of about 0.06 percent.
Page 363 But the ability to drive is affected well below a There is something else about drinking and driving BAC of 0.10 percent. Research shows that that many people do not know. Medical research the driving skills of many people are impaired at a shows that alcohol in a person’s system can make BAC approaching 0.05 percent, and that the crash injuries worse, especially injuries to the...
Page 364: Control Of A Vehicle
Control of a Vehicle Braking You have three systems that make your vehicle See Brake System Warning Light on page 250. go where you want it to go. They are the brakes, Braking action involves perception time and the steering, and the accelerator. All three reaction time.
Page 365: Anti-Lock Brake System (Abs)
Anti-Lock Brake System (ABS) Avoid needless heavy braking. Some people drive in spurts — heavy acceleration followed by Your vehicle has the Anti-Lock Brake System heavy braking — rather than keeping pace with (ABS), an advanced electronic braking system traffic. This is a mistake. The brakes may not have that will help prevent a braking skid.
Page 366 ABS can change the brake pressure faster than any driver could. The computer is programmed to make the most of available tire and road conditions. This can help you steer around the obstacle while braking hard. Let us say the road is wet and you are driving safely.
Page 367: Braking In Emergencies
Locking Rear Axle Remember: ABS does not change the time you need to get your foot up to the brake pedal If your vehicle has this feature, your locking rear or always decrease stopping distance. If you get axle can give you additional traction on snow, mud, too close to the vehicle in front of you, you will not ice, sand or gravel.
Page 368 ® If the system fails to turn on or activate, the The StabiliTrak light ® StabiliTrak light along with one of the following will ﬂash on the messages will be displayed on the Driver instrument panel cluster Information Center (DIC): TRACTION CONTROL when the system is OFF, SERVICE TRACTION CONTROL, both on and activated.
Page 369 ® The traction control part of StabiliTrak When the traction control system has been turned be turned off by pressing and releasing the off, you may still hear system noises as a result ® StabiliTrak button if both systems (traction control of the brake-traction control coming on.
Page 370: Traction Control Operation
Traction Control Operation The repairs would not be covered by your warranty. Reduce engine power and do not spin The traction control system is part of the the wheel(s) excessively while these lights and ® StabiliTrak system. Traction control limits wheel this message are displayed.
Page 371: Steering
Steering The traction you can get in a curve depends on the condition of the tires and the road surface, the Power Steering angle at which the curve is banked, and your speed. While you are in a curve, speed is the one If you lose power steering assist because the factor you can control.
Page 372 Try to adjust your speed so you can “drive” through the curve. Maintain a reasonable, steady speed. Wait to accelerate until you are out of the curve, and then accelerate gently into the straightaway. Adding non-GM accessories can affect your vehicle’s performance.
Page 373: Off-Road Recovery
Off-Road Recovery You can turn the steering wheel up to one-quarter turn until the right front tire contacts the pavement You may ﬁnd that your right wheels have dropped edge. Then turn the steering wheel to go straight off the edge of a road onto the shoulder while you down the roadway.
Page 374 • So here are some tips for passing: When it looks like a chance to pass is coming up, start to accelerate but stay in the right • Drive ahead. Look down the road, to the lane and do not get too close. Time your move sides, and to crossroads for situations so you will be increasing speed as the time that might affect your passing patterns.
Page 375: Loss Of Control
• Loss of Control Check your vehicle’s mirrors, glance over your shoulder, and start your left lane change Let us review what driving experts say about what signal before moving out of the right lane to happens when the three control systems — brakes, pass.
Page 376 The three types of skids correspond to your Of course, traction is reduced when water, snow, vehicle’s three control systems. In the braking skid, ice, gravel, or other material is on the road. your wheels are not rolling. In the steering or For safety, you will want to slow down and adjust cornering skid, too much speed or steering in a your driving to these conditions.
Page 377: Off-Road Driving
Off-Road Driving Off-road driving involves some new skills. And that is why it is very important that you read this guide. This off-road guide is for vehicles that have You will ﬁnd many driving tips and suggestions. four-wheel drive. Also, see Braking on page 364. These will help make your off-road driving safer and If your vehicle does not have four-wheel drive, more enjoyable.
Page 378 Before You Go Off-Roading When you are back on roads, though, be sure to replace the air dam. There are some things to do before you go out. Notice: Operating your vehicle for extended For example, be sure to have all necessary periods without the front fascia lower air dam maintenance and service work done.
Page 379 Loading Your Vehicle for Off-Road There are some important things to remember about how to load your vehicle. Driving • The heaviest things should be on the load ﬂoor and forward of your rear axle. Put CAUTION: heavier items as far forward as you can. •...
Page 380 Environmental Concerns Traveling to Remote Areas Off-road driving can provide wholesome and It makes sense to plan your trip, especially when satisfying recreation. However, it also raises going to a remote area. Know the terrain and environmental concerns. We recognize these plan your route.
Page 381 Getting Familiar with Off-Road Driving Here are some things to keep in mind. At higher speeds: It is a good idea to practice in an area that is • You approach things faster and you have safe and close to home before you go into less time to scan the terrain for obstacles.
Page 382 Scanning the Terrain Surface Obstacles: Unseen or hidden obstacles can be hazardous. A rock, log, hole, rut, or Off-road driving can take you over many different bump can startle you if you are not prepared for kinds of terrain. You need to be familiar with them.
Page 383 Driving on Off-Road Hills Because you will be on an unpaved surface, it is especially important to avoid sudden acceleration, Off-road driving often takes you up, down, or sudden turns, or sudden braking. across a hill. Driving safely on hills requires good In a way, off-road driving requires a different kind judgment and an understanding of what your of alertness from driving on paved roads and...
Page 384: Approaching A Hill
Approaching a Hill Here are some other things to consider as you approach a hill. When you approach a hill, you need to decide • Is there a constant incline, or does the hill get if it is one of those hills that is just too steep sharply steeper in places? to climb, descend, or cross.
Page 385 Driving Uphill • Ease up on your speed as you approach the top of the hill. Once you decide you can safely drive up the hill, • Attach a ﬂag to the vehicle to make you more you need to take some special steps. visible to approaching traffic on trails or hills.
Page 386 • As you are backing down the hill, put your left What should I do if my vehicle stalls, hand on the steering wheel at the 12 o’clock or is about to stall, and I cannot make it position. This way, you will be able to tell up the hill? if your wheels are straight and maneuver as If this happens, there are some things you...
Page 387 Suppose, after stalling, I try to back down the hill and decide I just cannot do it. What CAUTION: should I do? Set the parking brake, put your transmission Shifting the transfer case to NEUTRAL in PARK (P) and turn off the engine. Leave can cause your vehicle to roll even if the the vehicle and go get some help.
Page 388 Driving Downhill If you decide you can go down a hill safely, then try to keep your vehicle headed straight down, and When off-roading takes you downhill, you will want use a low gear. This way, engine drag can help to consider a number of things: your brakes and they will not have to do all •...
Page 389 Are there some things I should not do Am I likely to stall when going downhill? when driving down a hill? It is much more likely to happen going Yes! These are important because if you uphill. But if it happens going downhill, ignore them you could lose control and here is what to do.
Page 390: Driving Across An Incline
Driving Across an Incline But when you drive across an incline, the much more narrow track width — the distance Sooner or later, an off-road trail will probably go between the left and right wheels — may not across the incline of a hill. If this happens, prevent the vehicle from tilting and rolling over.
Page 391: Stalling On An Incline
What if I am driving across an incline that is not too steep, but I hit some loose gravel and start to slide downhill. What should I do? If you feel your vehicle starting to slide sideways, turn downhill. This should help straighten out the vehicle and prevent the side slipping.
Page 392 Driving in Mud, Sand, Snow, or Ice Hard packed snow and ice offer the worst tire traction. On these surfaces, it is very easy to lose When you drive in mud, snow, or sand, your control. On wet ice, for example, the traction is wheels will not get good traction.
Page 393 Driving in Water Find out how deep the water is before you drive through it. If it is deep enough to cover your wheel hubs, axles, or exhaust pipe, do not try it — you CAUTION: probably will not get through. Also, water that deep can damage your axle and other vehicle parts.
Page 394: Driving At Night
After Off-Road Driving Driving at Night Remove any brush or debris that has collected on Night driving is more dangerous than day driving. the underbody, chassis, or under the hood. One reason is that some drivers are likely to These accumulations can be a ﬁre hazard. be impaired —...
Page 395 No one can see as well at night as in the daytime. Keep the windshield and all the glass on your But as we get older these differences increase. vehicle clean — inside and out. Glare at night A 50-year-old driver may require at least twice as is made much worse by dirt on the glass.
Page 396: Driving In Rain And On Wet Roads
Driving in Rain and on Wet Roads It is always wise to go slower and be cautious if rain starts to fall while you are driving. The surface may get wet suddenly when your reﬂexes are tuned for driving on dry pavement. The heavier the rain, the harder it is to see.
Page 397 Hydroplaning does not happen often. But it can if CAUTION: (Continued) your tires do not have much tread or if the pressure in one or more is low. It can happen if a lot of water is standing on the road. If you can After driving through a large puddle of see reﬂections from trees, telephone poles, water or a car wash, apply the brake pedal...
Page 398 Driving Through Flowing Water Some Other Rainy Weather Tips • Turn on your low-beam headlamps — not just your parking lamps — to help make you more CAUTION: visible to others. • Besides slowing down, allow some extra Flowing or rushing water creates strong following distance.
Page 399: City Driving
City Driving Here are ways to increase your safety in city driving: • Know the best way to get to where you are going. Get a city map and plan your trip into an unknown part of the city just as you would for a cross-country trip.
Page 400: Freeway Driving
Freeway Driving The most important advice on freeway driving is: Keep up with traffic and keep to the right. Drive at the same speed most of the other drivers are driving. Too-fast or too-slow driving breaks a smooth traffic ﬂow. Treat the left lane on a freeway as a passing lane.
Page 401: Before Leaving On A Long Trip
Before Leaving on a Long Trip Before changing lanes, check your mirrors. Then use your turn signal. Make sure you are ready. Try to be well rested. Just before you leave the lane, glance quickly If you must start when you are not fresh — such as over your shoulder to make sure there is not after a day’s work —...
Page 402: Highway Hypnosis
Highway Hypnosis Here are some things you can check before a trip: • Windshield Washer Fluid: Is the reservoir Is there actually such a condition as highway full? Are all windows clean inside and outside? hypnosis? Or is it just plain falling asleep at the •...
Page 403: Hill And Mountain Roads
Hill and Mountain Roads If you drive regularly in steep country, or if you are planning to visit there, here are some tips that can make your trips safer and more enjoyable. See Off-Road Driving on page 377 for information about driving off-road.
Page 404 • Know how to go uphill. You may want to shift down to a lower gear. The lower gears help CAUTION: cool your engine and transmission, and you can climb the hill better. Coasting downhill in NEUTRAL (N) or with •...
Page 405: Winter Driving
Winter Driving Include an ice scraper, a small brush or broom, a supply of windshield washer ﬂuid, a rag, some winter outer clothing, a small shovel, a ﬂashlight, a red cloth, and a couple of reﬂective warning triangles. And, if you will be driving under severe conditions, include a small bag of sand, a piece of old carpet, or a couple of burlap bags to help provide traction.
Page 406 Driving on Snow or Ice What is the worst time for this? Wet ice. Very cold snow or ice can be slick and hard to drive on. Most of the time, those places where the tires But wet ice can be even more trouble because it meet the road probably have good traction.
Page 407 If You Are Caught in a Blizzard The Anti-Lock Brake System (ABS) improves your vehicle’s stability when you make a hard stop If you are stopped by heavy snow, you could be in on a slippery road. Even though you have ABS, a serious situation.
Page 408 CAUTION: Snow can trap exhaust gases under your vehicle. This can cause deadly CO (carbon monoxide) gas to get inside. CO could overcome you and kill you. You cannot see it or smell it, so you might not know it is in your vehicle. Clear away snow from around the base of your vehicle, especially any that is blocking the exhaust pipe.
Page 409: If Your Vehicle Is Stuck In Sand, Mud, Ice, Or Snow
You will need a well-charged battery to restart the vehicle, and possibly for signaling later on with CAUTION: your headlamps. Let the heater run for a while. Then, shut the engine off and close the window If you let your vehicle’s tires spin at high almost all the way to preserve the heat.
Page 410: Rocking Your Vehicle To Get It Out
Rocking Your Vehicle to Get It Out Recovery Hooks First, turn the steering wheel left and right. That will clear the area around the front wheels. CAUTION: If you have a four-wheel-drive vehicle, shift into Four-Wheel High or Four-Wheel Low. Turn ®...
Page 411: Loading Your Vehicle
Loading Your Vehicle It is very important to know how much weight your vehicle can carry. This weight is called the vehicle capacity weight and includes the weight of all occupants, cargo, and all nonfactory-installed options. Two labels on your vehicle show how much weight it was designed to carry, the Tire and Loading Information label and the Certiﬁcation/Tire label.
Page 412 Tire and Loading Information Label The tire and loading information label shows the number of occupant seating positions (A), and the maximum vehicle capacity weight (B) in kilograms and pounds. The Tire and Loading Information label also shows the size of the original equipment tires (C) and the recommended cold tire inﬂation pressures (D).
Page 413 Steps for Determining Correct Load Limit 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That 1. Locate the statement “The combined weight of weight may not safely exceed the available occupants and cargo should never exceed cargo and luggage load capacity calculated XXX kg or XXX lbs”...
Page 414 Example 1 Example 2 Item Description Total Item Description Total Vehicle Capacity Weight Vehicle Capacity Weight 1,000 lbs (453 kg) 1,000 lbs (453 kg) for Example 1 = for Example 2 = Subtract Occupant Subtract Occupant Weight 150 lbs 300 lbs (136 kg) Weight 150 lbs 750 lbs (136 kg) (68 kg) ×...
Page 415 Certiﬁcation/Tire Label Example 3 Item Description Total Vehicle Capacity Weight 1,000 lbs (453 kg) for Example 3 = A vehicle speciﬁc Certiﬁcation/Tire label is found Subtract Occupant Weight 200 lbs 1,000 lbs (453 kg) on the rear edge of the driver’s door. The label (91 kg) ×...
Page 416 The Certiﬁcation/Tire label also tells you the maximum weights for the front and rear axles, CAUTION: called Gross Axle Weight Rating (GAWR). To ﬁnd out the actual loads on your front and rear Do not load your vehicle any heavier than axles, you need to go to a weigh station and weigh your vehicle.
Page 417 Notice: Overloading your vehicle may cause damage. Repairs would not be covered by your CAUTION: warranty. Do not overload your vehicle. The label will help you decide how much cargo Things you put inside your vehicle can and installed equipment your truck can carry. strike and injure people in a sudden stop Using heavier suspension components to or turn, or in a crash.
Page 418: Adding A Snow Plow Or Similar Equipment
Adding a Snow Plow or Similar How do I know if my vehicle can handle a snow plow? Equipment Some vehicles are built with a special snow Before installing a snow plow on your vehicle, plow prep package, called RPO VYU. If your here are some things you will need to know: vehicle has this option, you can add a Notice: If your vehicle does not have the snow...
Page 419 • Say, for example, you have a 700 lb (318 kg) Follow the snow plow manufacturer’s snow plow. The total weight of all occupants and recommendations regarding rear ballast. cargo inside the cab should not exceed 300 lb Rear ballast may be required to ensure (135 kg).
Page 420 In order to calculate the amount of weight any What is front axle reserve capacity, and front accessory, such as a snow plow, is adding to how do I calculate it? the front axle, use the following formula: Front axle reserve capacity is the difference between your front Gross Axle Weight Rating (GAWR) and the front axle weight of your vehicle with full fuel and passengers.
Page 421 For example, adding a 700 lb (318 kg) snow plow actually adds more than 700 lbs (318 kg) to the CAUTION: front axle. Using the formula, if the snow plow is 4 ft (122 cm) in front of the front axle and the On some vehicles that have certain front wheel base is 10 ft (305 cm), then: mounted equipment, such as a snow...
Page 422: Towing
Emergency Roof Lamp Provisions What is total vehicle reserve capacity? Vehicles with the RPO VYU snow plow prep This is the difference between your GVWR and package also have an emergency roof lamp the weight of your vehicle with full fuel and provision package, RPO TRW.
Page 423: Recreational Vehicle Towing
Recreational Vehicle Towing Here are some important things to consider before you do recreational vehicle towing: Recreational vehicle towing means towing your • What’s the towing capacity of the towing vehicle behind another vehicle – such as behind a vehicle? Be sure you read the tow vehicle motorhome.
Page 424 Dinghy Towing Four-Wheel-Drive Vehicles Two-Wheel-Drive Vehicles Notice: If you tow a two-wheel-drive vehicle with all four wheels on the ground, the transmission could be damaged. The repairs would not be covered by your warranty. Do not tow a two-wheel-drive vehicle with all four wheels on the ground.
Page 425 Dolly Towing CAUTION: Two-Wheel-Drive Vehicles Notice: If you tow a two-wheel-drive Shifting a four-wheel-drive vehicle’s vehicle with the rear wheels on the ground, transfer case into NEUTRAL can cause the transmission could be damaged. your vehicle to roll even if the The repairs would not be covered by your transmission is in PARK (P).
Page 426 Four-Wheel-Drive Vehicles 3. Turn the engine off, but leave the ignition on. ® 4. Firmly set the parking brake. If your vehicle is equipped with StabiliTrak , it is not designed to be dolly towed. If you need to tow 5.
Page 427: Level Control
® Level Control Autoride ® If equipped, the Autoride feature will provide a Automatic Level Control superior vehicle ride and handling under a variety The automatic level control rear suspension is of passenger and loading conditions. available on two-wheel drive and four-wheel drive The system is fully automatic and uses a computer light-duty vehicles and comes as a part of the controller to continuously monitor vehicle speed,...
Page 428: Towing A Trailer
Towing a Trailer Notice: Pulling a trailer improperly can damage your vehicle and result in costly Do not tow a trailer during break-in. See New repairs not covered by your warranty. To pull a Vehicle Break-In on page 143 for more information. trailer correctly, follow the advice in this part, and see your dealer for important information about towing a trailer with your...
Page 429 If You Do Decide To Pull A Trailer • Then, during the ﬁrst 500 miles (800 km) that you tow a trailer, don’t drive over 50 mph If you do, here are some important points: (80 km/h) and don’t make starts at full throttle. •...
Page 430 Tow/Haul Mode Tow/Haul is a feature that assists when pulling a heavy trailer or a large or heavy load. The purpose of the Tow/Haul mode is to: • Reduce the frequency and improve the predictability of transmission shifts when pulling a heavy trailer or a large or heavy load. •...
Page 431 Your vehicle is equipped with a button at the end Tow/Haul is most useful under the following of the shift lever which, when pressed, enables driving conditions: tow/haul. Your vehicle may be equipped with • When pulling a heavy trailer or a large or ®...
Page 432: Weight Of The Trailer
Weight of the Trailer Maximum trailer weight is calculated assuming only the driver is in the tow vehicle and it has all How heavy can a trailer safely be? the required trailering equipment. The weight of additional optional equipment, passengers and It depends on how you plan to use your rig.
Page 433 K-1500 (4WD) Axle Ratio Maximum Trailer Weight GCWR 3.73 6,700 lbs (3 039 kg) 13,000 lbs (5 897 kg) 5300 V8 4.10 7,700 lbs (3 493 kg) 14,000 lbs (6 350 kg) 3.73 7,000 lbs (3 175 kg) 13,000 lbs (5 897 kg) 5300 V8 (Extended Models) 4.10 8,000 lbs (3 629 kg)
Page 434 Weight of the Trailer Tongue The tongue load (A) of any trailer is an important weight to measure because it affects the total or gross weight of your vehicle. The Gross Vehicle Weight (GVW) includes the curb weight of the vehicle, any cargo you may carry in it, and the people who will be riding in the vehicle.
Page 435 After you have loaded the trailer, weigh the trailer and then the tongue separately, to see if the weights are proper. If they are not, you may be able to get them right by moving some items around in the trailer. Trailering may be limited by the vehicle’s ability to carry tongue weight.
Page 436 You may add 300 lbs (136 kg) to the front axle Since tongue weight is usually at least 10 percent of weight and 400 lbs (181 kg) to the rear axle total loaded trailer weight, you can expect that the weight.
Page 437 Hitches When using a weight-distributing hitch, the hitch must be adjusted so the distance (A) remains It’s important to have the correct hitch equipment. the same both before and after coupling the trailer Crosswinds, large trucks going by and rough to the tow vehicle.
Page 438 ® Safety Chains If your vehicle is equipped with StabiliTrak , your trailer cannot tap into the vehicle’s hydraulic You should always attach safety chains between brake system. your vehicle and your trailer. Cross the safety Your trailer brake system can tap into the vehicle’s chains under the tongue of the trailer to help hydraulic brake system only if: prevent the tongue from contacting the road if it...
Page 439 Driving with a Trailer CAUTION: (Continued) CAUTION: • Keep the rear-most windows closed. • If exhaust does come into your vehicle through a window in the rear or If you have a rear-most window open and another opening, drive with your front, you pull a trailer with your vehicle, carbon main heating or cooling system on monoxide (CO) could come into your...
Page 440 Backing Up Before you start, check all trailer hitch parts and attachments, safety chains, electrical connector, Hold the bottom of the steering wheel with one lamps, tires and mirror adjustment. If the trailer has hand. Then, to move the trailer to the left, electric brakes, start your vehicle and trailer just move that hand to the left.
Page 441 Turn Signals When Towing a Trailer You may also want to activate the tow/haul mode if the transmission shifts too often. See “Tow/Haul The arrows on your instrument panel will Mode” earlier in this section for more information. ﬂash whenever you signal a turn or lane change. When towing at high altitude on steep uphill Properly hooked up, the trailer lamps will also grades, consider the following: Engine coolant at...
Page 442 Parking on Hills 5. If you have a four-wheel-drive vehicle, be sure the transfer case is in a drive gear and not in NEUTRAL. CAUTION: 6. Release the regular brakes. You really should not park your vehicle, CAUTION: with a trailer attached, on a hill. If something goes wrong, your rig could It can be dangerous to get out of your start to move.
Page 443 Maintenance When Trailer Towing CAUTION: (Continued) Your vehicle will need service more often when you’re pulling a trailer. See the Maintenance Always put the shift lever fully in PARK (P) Schedule for more on this. Things that are with the parking brake ﬁrmly set. especially important in trailer operation are automatic transmission ﬂuid (don’t overﬁll), engine If the transfer case on four-wheel-drive...
Page 444 Trailer Wiring Harness The seven-wire harness contains the following trailer circuits: Your vehicle is equipped with the following wiring • Yellow: Left Stop/Turn Signal harnesses for towing a trailer. • Dark Green: Right Stop/Turn Signal Basic Trailer Wiring • Brown: Taillamps The trailer wiring harness, with a seven-pin •...
Page 445 Heavy-Duty Trailer Wiring Harness The seven-wire harness contains the following trailer circuits: Package • Yellow: Left Stop/Turn Signal • Dark Green: Right Stop/Turn Signal • Brown: Taillamps • White: Ground • Light Green: Back-up Lamps • Red: Battery Feed* Your vehicle is equipped with the seven-wire •...
Page 446: Trailer Recommendations
Electric Brake Control Wiring Trailer Recommendations Provisions You must subtract your hitch loads from the Cargo Weight Rating (CWR) for your vehicle. CWR is These wiring provisions are included with your the maximum weight of the load your vehicle can vehicle as part of the trailer wiring package.
Page 447: Service And Appearance Care
Section 5 Service and Appearance Care Service ............450 Engine Air Cleaner/Filter ......468 Accessories and Modiﬁcations ....450 Automatic Transmission Fluid ....471 California Proposition 65 Warning ....451 Engine Coolant .......... 475 Doing Your Own Service Work ....451 Coolant Surge Tank Pressure Cap ....
Page 448 Section 5 Service and Appearance Care Bulb Replacement ........506 Changing a Flat Tire ......... 534 Halogen Bulbs ........... 506 Removing the Spare Tire and Tools ..535 Taillamps, Turn Signal, Stoplamps Removing the Flat Tire and Installing and Back-up Lamps ....... 506 the Spare Tire ........
Page 449 Section 5 Service and Appearance Care Aluminum or Chrome-Plated Wheels Electrical System ........565 and Trim ..........561 Add-On Electrical Equipment ..... 565 Tires ............562 Windshield Wiper Fuses ......566 Sheet Metal Damage ......... 562 Power Windows and Other Power Finish Damage ..........
Page 450: Service
Service Accessories and Modiﬁcations When you add non-GM accessories to your vehicle Your dealer knows your vehicle best and wants they can affect your vehicle’s performance and you to be happy with it. We hope you will go safety, including such things as, airbags, braking, to your dealer for all your service needs.
Page 451: California Proposition 65 Warning
California Proposition 65 Warning Doing Your Own Service Work Most motor vehicles, including this one, contain and/or emit chemicals known to the State of CAUTION: California to cause cancer and birth defects or other reproductive harm. Engine exhaust, You can be injured and your vehicle could many parts and systems (including some inside the vehicle), many ﬂuids, and some component be damaged if you try to do service work...
Page 452: Adding Equipment To The Outside Of
Fuel Your vehicle has an airbag system. Before attempting to do your own service work, see Use of the recommended fuel is an important part Servicing Your Airbag-Equipped Vehicle on of the proper maintenance of your vehicle. To page 110. help keep the engine clean and maintain optimum You should keep a record with all parts receipts vehicle performance, GM recommends the use...
Page 453: Gasoline Octane
Gasoline Octane California Fuel Use regular unleaded gasoline with a posted If your vehicle is certiﬁed to meet California octane rating of 87 or higher. If the octane rating Emissions Standards, it is designed to operate on is less than 87, you might notice an audible fuels that meet California speciﬁcations.
Page 454: Additives
Additives However, E85 (85% ethanol) and other fuels containing more than 10% ethanol must not be To provide cleaner air, all gasolines in the United used in vehicles that were not designed for States are now required to contain additives those fuels.
Page 455: Fuel E85 (85% Ethanol)
Fuel E85 (85% Ethanol) locator.html) that can help you ﬁnd E85 fuel. Those stations that do have E85 should have The 8th digit of the Vehicle Identiﬁcation Number a label indicating ethanol content. Do not use the (VIN) shows the code letter or number that fuel if the ethanol content is greater than 85%.
Page 456: Fuels In Foreign Countries
Fuels in Foreign Countries You should drive the vehicle immediately after refueling for at least seven miles (11 km) to allow If you plan on driving in another country outside the vehicle to adapt to the change in ethanol the United States or Canada, the proper fuel might concentration.
Page 457: Filling The Tank
Filling the Tank CAUTION: Fuel vapor burns violently and a fuel ﬁre can cause bad injuries. To help avoid injuries to you and others, read and follow all the instructions on the pump island. Turn off your engine when you are refueling.
Page 458 CAUTION: If you spill fuel and then something ignites it, you could be badly burned. Fuel can spray out on you if you open the fuel cap too quickly. This spray can happen if your tank is nearly full, and is more likely in hot weather.
Page 459: Filling A Portable Fuel Container
Filling a Portable Fuel Container If your vehicle has a Driver Information Center (DIC), the TIGHTEN GAS CAP message will be displayed if the fuel cap is not properly installed. CAUTION: CAUTION: Never ﬁll a portable fuel container while it is in your vehicle.
Page 460: Checking Things Under The Hood
Checking Things Under Hood Release the Hood To open the hood do the following: 1. Pull the handle with this symbol on it. It is CAUTION: located inside the vehicle to the lower left of the steering An electric fan under the hood can start up wheel.
Page 461 3. Push the secondary hood release to the right. 4. Lift the hood. Before closing the hood, be sure all the ﬁller caps are on properly. Then bring the hood from full open to within 6 inches (152 mm) from the closed position, pause, then push the front center of the hood with a swift, ﬁrm motion to fully close the hood.
Page 462: Engine Compartment Overview
Engine Compartment Overview When you open the hood on the 5.3L engine (4.8L and 6.0L similar), here is what you will see:...
Page 463: Engine Oil
A. Engine Air Cleaner/Filter. See Engine Air L. Brake Master Cylinder Reservoir. See “Brake Cleaner/Filter on page 468. Fluid” under Brakes on page 489. B. Air Filter Restriction Indicator (If Equipped). M. Underhood Fuse Block. See Underhood Fuse See Engine Air Cleaner/Filter on page 468. Block on page 569.
Page 464 The engine oil dipstick handle is a yellow loop. Notice: Do not add too much oil. If the engine See Engine Compartment Overview on page 462 has so much oil that the oil level gets above for the location of the engine oil dipstick. the cross-hatched area that shows the proper operating range, the engine could 1.
Page 465 What Kind of Engine Oil to Use These numbers on an oil container show its viscosity, or thickness. Do not use other viscosity oils such as SAE 20W-50. • Oils meeting these requirements should have the starburst symbol on the container.
Page 466: Engine Oil Life System
If you are in an area of extreme cold, where the When the system has calculated that oil life has temperature falls below −20°F (−29°C), it is been diminished, it will indicate that an oil change recommended that you use either an SAE 5W-30 is necessary.
Page 467 How to Reset the Engine Oil Life If the CHANGE ENGINE OIL SOON message comes back on when you start your vehicle, the System Engine Oil Life System has not reset. Repeat The Engine Oil Life System calculates when to the procedure.
Page 468: Engine Air Cleaner/Filter
Engine Air Cleaner/Filter When to Inspect the Engine Air Cleaner/Filter See Engine If your vehicle has an air ﬁlter restriction indicator, Compartment Overview it lets you know when the engine air cleaner/ﬁlter on page 462 for the needs to be replaced. On vehicles with a restriction location of the engine air indicator, you should inspect the air ﬁlter cleaner/ﬁlter and the...
Page 469 How to Inspect the Engine Air Replacing the Engine Air Cleaner/Filter and Resetting the Air Filter Restriction Cleaner/Filter Indicator Vehicles With an Air Filter Restriction Indicator Locate the air ﬁlter restriction indicator on the engine air cleaner/ﬁlter cover. When the indicator turns black or is in the red/orange “change”...
Page 470 6. Reinstall the cover and tighten the screws. 7. Reset the air ﬁlter restriction indicator, if the vehicle has one, by pressing the top button on the indicator. CAUTION: Operating the engine with the air cleaner/ﬁlter off can cause you or others to be burned.
Page 471: Automatic Transmission Fluid
Automatic Transmission Fluid Notice: Too much or too little ﬂuid can damage your transmission. Too much can When to Check and Change Automatic mean that some of the ﬂuid could come out and fall on hot engine parts or exhaust system Transmission Fluid parts, starting a ﬁre.
Page 472 Checking the Fluid Level Get the vehicle warmed up by driving about 15 miles (24 km) when outside temperatures are Prepare your vehicle as follows: above 50°F (10°C). If it is colder than 50°F (10°C), 1. Park your vehicle on a level place. Keep the drive the vehicle in THIRD (3) until the engine engine running.
Page 473 Then, without shutting off the engine, follow these steps: The transmission dipstick handle with this graphic is located at the rear of the engine compartment, on the passenger’s side of the vehicle. See Engine Compartment Overview on page 462 3. Check both sides of the dipstick, and read the for more information on location.
Page 474 Consistency of Readings Notice: Use of the incorrect automatic transmission ﬂuid may damage your vehicle, Always check the ﬂuid level at least twice using and the damages may not be covered by the procedure described previously. Consistency your warranty. Always use the automatic (repeatable readings) is important to maintaining transmission ﬂuid listed in Recommended proper ﬂuid level.
Page 475: Engine Coolant
Engine Coolant • Protect against rust and corrosion. • Help keep the proper engine temperature. The cooling system in your vehicle is ﬁlled with ® • Let the warning lights and gages work as DEX-COOL engine coolant. This coolant is they should.
Page 476 What to Use Notice: If you use an improper coolant mixture, your engine could overheat and be Use a mixture of one-half clean, drinkable water badly damaged. The repair cost would not be ® and one-half DEX-COOL coolant which will covered by your warranty.
Page 477 Checking Coolant Adding Coolant If you need more coolant, add the proper The coolant surge tank is located in the engine ® DEX-COOL coolant mixture at the surge tank, compartment on the passenger’s side of the but only when the engine is cool. vehicle.
Page 478: Coolant Surge Tank Pressure Cap
Coolant Surge Tank Pressure Cap If Steam Is Coming From Your Engine Notice: If the pressure cap is not tightly CAUTION: installed, coolant loss and possible engine damage may occur. Be sure the cap is properly and tightly secured. Steam from an overheated engine can The coolant surge tank pressure cap must be fully burn you badly, even if you just open the installed on the coolant surge tank.
Page 479 Notice: If your engine catches ﬁre because If you get the ENGINE OVERHEATED STOP you keep driving with no coolant, your vehicle ENGINE or the ENGINE OVERHEATED IDLE can be badly damaged. The costly repairs ENGINE message with no sign of steam, try this would not be covered by your warranty.
Page 480: Overheated Engine Protection
Overheated Engine Protection If there is still no sign of steam and your vehicle is equipped with an engine-driven cooling fan, Operating Mode push down the accelerator until the engine speed is about twice as fast as normal idle speed for If an overheated engine condition exists and the at least ﬁve minutes while you are parked.
Page 481: Cooling System
Cooling System CAUTION: When you decide it is safe to lift the hood, here is what you will see: An electric fan under the hood can start up and injure you even when the engine is not running. Keep hands, clothing, and tools away from any underhood electric fan.
Page 482 CAUTION: Heater and radiator hoses, and other engine parts, can be very hot. Do not touch them. If you do, you can be burned. Do not run the engine if there is a leak. If you run the engine, it could lose all coolant.
Page 483 ® Notice: Using coolant other than DEX-COOL If no coolant is visible in the surge tank, add may cause premature engine, heater core, coolant as follows: or radiator corrosion. In addition, the engine coolant could require changing sooner, at CAUTION: 30,000 miles (50 000 km) or 24 months, whichever occurs ﬁrst.
Page 484 Notice: In cold weather, water can freeze and crack the engine, radiator, heater core and CAUTION: other parts. Use the recommended coolant and the proper coolant mixture. Adding only plain water to your cooling system can be dangerous. Plain water, or CAUTION: some other liquid such as alcohol, can boil before the proper coolant mixture will.
Page 485 1. You can remove the coolant surge tank pressure cap when the cooling system, including the coolant surge tank pressure cap and upper radiator hose, is no longer hot. Turn the pressure cap slowly counterclockwise about one full turn. If you hear a hiss, wait for that to stop.
Page 486: Engine Fan Noise
5. Then replace the pressure cap. Be sure the pressure cap is hand-tight and fully seated. 6. Verify coolant level after engine is shut off and the coolant is cold. If necessary, repeat coolant ﬁll procedure steps 1 through 6. Engine Fan Noise If your vehicle has a clutched engine cooling fan, when the clutch is engaged, the fan spins...
Page 487: Power Steering Fluid
Power Steering Fluid You may also hear this fan noise when you start the engine. It will go away as the fan clutch partially disengages. See Engine Compartment Overview If your vehicle has electric cooling fans, you may on page 462 for hear the fans spinning at low speed during reservoir location.
Page 488: Windshield Washer Fluid
How to Check Power Steering Fluid Windshield Washer Fluid To check the power steering ﬂuid, do the following: What to Use 1. Turn the key off and let the engine When you need windshield washer ﬂuid, be sure compartment cool down. to read the manufacturer’s instructions before 2.
Page 489: Brakes
Brakes Open the cap with the washer symbol on it. Brake Fluid Add washer ﬂuid until the tank is full. See Engine Compartment Your brake master Overview on page 462 cylinder reservoir is for reservoir location. ﬁlled with DOT-3 brake ﬂuid.
Page 490 So, it is not a good idea to top off your brake ﬂuid. Refer to the Maintenance Schedule to determine Adding brake ﬂuid will not correct a leak. If you when to check your brake ﬂuid. See Scheduled add ﬂuid when your linings are worn, then you will Maintenance on page 578.
Page 491 What to Add Notice: • Using the wrong ﬂuid can badly damage When you do need brake ﬂuid, use only DOT-3 brake system parts. For example, just a brake ﬂuid. Use new brake ﬂuid from a sealed few drops of mineral-based oil, such container only.
Page 492 Brake Wear Notice: Continuing to drive with worn-out brake pads could result in costly brake repair. Your vehicle has four-wheel disc brakes. Some driving conditions or climates may cause Disc brake pads have built-in wear indicators that a brake squeal when the brakes are ﬁrst applied or make a high-pitched warning sound when the lightly applied.
Page 493: Battery
Replacing Brake System Parts Battery The braking system on a vehicle is complex. Its Your vehicle has a maintenance free battery. many parts have to be of top quality and work well When it is time for a new battery, get one that has together if the vehicle is to have really good the replacement number shown on the original braking.
Page 494: Jump Starting
Vehicle Storage CAUTION: If you are not going to drive your vehicle for 25 days or more, remove the black, negative (−) cable from the battery. This will help keep the Batteries can hurt you. They can be battery from running down. dangerous because: •...
Page 495 Notice: If the other vehicle’s system is not a Notice: If you leave your radio or other 12-volt system with a negative ground, accessories on during the jump starting both vehicles can be damaged. Only use procedure, they could be damaged. The repairs vehicles with 12-volt systems with negative would not be covered by your warranty.
Page 496 CAUTION: An electric fan can start up even when the engine is not running and can injure you. Keep hands, clothing and tools away from any underhood electric fan. The remote negative (-) terminal is a stud located on the right front of the engine, where the negative battery cable attaches.
Page 497 CAUTION: CAUTION: Using a match near a battery can cause Fans or other moving engine parts can battery gas to explode. People have been injure you badly. Keep your hands away hurt doing this, and some have been from moving parts once the engine is blinded.
Page 498 6. Connect the red 9. Connect the other end of the negative (−) positive (+) cable to cable to the remote negative (−) terminal, the positive (+) on the vehicle with the dead battery. terminal of the 10. Now start the vehicle with the good battery vehicle with the dead and run the engine for a while.
Page 499 To disconnect the jumper cables from both vehicles do the following: 1. Disconnect the black negative (−) cable from the vehicle that had the bad battery. 2. Disconnect the black negative (−) cable from the vehicle with the good battery. 3.
Page 500: Rear Axle
Rear Axle How to Check Lubricant When to Check Lubricant It is not necessary to regularly check rear axle ﬂuid unless you suspect there is a leak or you hear an unusual noise. A ﬂuid loss could indicate a problem. Have it inspected and repaired. All axle assemblies are ﬁlled by volume of ﬂuid during production.
Page 501: Four-Wheel Drive
• How to Check Lubricant For 6.0L engines, the proper level is from 0.6 inch to 1.6 inches (15 mm to 40 mm) below the bottom of the ﬁller plug hole, located on the rear axle. Add only enough ﬂuid to reach the proper level.
Page 502: Front Axle
When to Change Lubricant Refer to the Maintenance Schedule to determine how often to change the lubricant. See Scheduled Maintenance on page 578. What to Use Refer to the Maintenance Schedule to determine what kind of lubricant to use. See Recommended Fluids and Lubricants on page 588.
Page 503: Headlamp Aiming
What to Use The vehicle should be properly prepared as follows: Refer to the Maintenance Schedule to determine • The vehicle should be placed so the what kind of lubricant to use. See Recommended headlamps are 25 ft. (7.6 m) from a light Fluids and Lubricants on page 588.
Page 504 To adjust the vertical aim, do the following: 1. Open the hood. See Hood Release on page 460 for more information. 4. At the wall measure from the ground upward (A) to the recorded distance from Step 3 and mark it. 5.
Page 505 9. Make sure that the light from the headlamp is positioned at the bottom edge of the horizontal tape line. The lamp on the left (A) shows the correct headlamp aim. The lamp on the 7. Locate the vertical headlamp aiming screws, right (B) shows the incorrect headlamp aim.
Page 506: Bulb Replacement
Bulb Replacement Taillamps, Turn Signal, Stoplamps and Back-up Lamps For the proper type of replacement bulbs, see Replacement Bulbs on page 508. A. Taillamp/Turn Signal Lamp For any bulb changing procedure not listed in this section, contact your dealer. B. Back-up Lamp C.
Page 507 To replace one of these bulbs, do the following: 4. Press the release tab, if bulb socket has one, and turn the bulb socket counterclockwise to 1. Open the liftgate. See Power Liftgate on remove it from the taillamp assembly. page 132 for more information.
Page 508: License Plate Lamp
License Plate Lamp 3. Turn the bulb socket counterclockwise and pull the bulb straight out of the socket. 4. Install the new bulb. 5. Reverse Steps 1 through 3 to reinstall the license plate lamp. Replacement Bulbs Exterior Lamp Bulb Number Back-up Lamp 7441 License Plate Lamp...
Page 509: Windshield Wiper Blade Replacement
Windshield Wiper Blade Replacement Windshield wiper blades should be inspected for wear or cracking. See Scheduled Maintenance on page 578. Replacement blades come in different types and are removed in different ways. To replace the wiper blade assembly, do the following: 1.
Page 510: Tires
Backglass Wiper Blade Replacement 1. Lift the wiper blade assembly up and out of the park rest position. 4. Replace the wiper blade. 5. Return the wiper blade assembly to the park rest position. 2. Pull the wiper blade assembly away from the Tires backglass.
Page 511 CAUTION: (Continued) CAUTION: • Worn, old tires can cause accidents. If Poorly maintained and improperly used the tire’s tread is badly worn, or if tires are dangerous. your vehicle’s tires have been • Overloading your vehicle’s tires can damaged, replace them. cause overheating as a result of too much friction.
Page 512: Tire Sidewall Labeling
Tire Sidewall Labeling (B) TPC Spec (Tire Performance Criteria Speciﬁcation): Original equipment tires designed Useful information about a tire is molded into the to GM’s speciﬁc tire performance criteria have sidewall. The following illustrations are examples a TPC speciﬁcation code molded onto the sidewall. of a typical P-Metric and a LT-Metric tire sidewall.
Page 513 (G) Maximum Cold Inﬂation Load Limit: and service description. See the “Tire Size” Maximum load that can be carried and the illustration later in this section for more detail. maximum pressure needed to support that load. (B) TPC Spec (Tire Performance Criteria For information on recommended tire pressure see Speciﬁcation): Original equipment tires designed Inﬂation - Tire Pressure on page 518 and Loading...
Page 514 (F) Tire Ply Material: The type of cord and number of plies in the sidewall and under the tread. (G) Single Tire Maximum Load: Maximum load that can be carried and the maximum pressure needed to support that load when used as a single.
Page 515: Tire Terminology And Deﬁnitions
Tire Terminology and Deﬁnitions (C) Aspect Ratio: A two-digit number that indicates the tire height-to-width measurements. For example, if the tire size aspect ratio is 75, as Air Pressure: The amount of air inside the tire shown in item C of the light truck (LT-Metric) tire pressing outward on each square inch of the illustration, it would mean that the tire’s sidewall is tire.
Page 516 Cold Tire Pressure: The amount of air pressure Intended Outboard Sidewall: The side of an in a tire, measured in pounds per square inch asymmetrical tire, that must always face outward (psi) or kilopascals (kPa) before a tire has built up when mounted on a vehicle.
Page 517 Occupant Distribution: Designated seating Sidewall: The portion of a tire between the tread positions. and the bead. Outward Facing Sidewall: The side of an Speed Rating: An alphanumeric code assigned asymmetrical tire that has a particular side that to a tire indicating the maximum speed at faces outward when mounted on a vehicle.
Page 518: Inﬂation - Tire Pressure
• Vehicle Capacity Weight: The number of Premature or irregular wear designated seating positions multiplied by 150 lbs • Poor handling (68 kg) plus the rated cargo load. See Loading • Reduced fuel economy Your Vehicle on page 411. If your tires have too much air (over-inﬂation), Vehicle Maximum Load on the Tire: Load on an you can get the following: individual tire due to curb weight, accessory...
Page 519: Tire Pressure Monitor System
When to Check If you overﬁll the tire, release air by pushing on the metal stem in the center of the tire valve. Check your tires once a month or more. Do not Recheck the tire pressure with the tire gage. forget to check the spare tire.
Page 520 The low tire pressure warning symbol on the vehicle placard or tire inﬂation pressure label, you instrument panel cluster and the CHECK TIRE should determine the proper tire inﬂation PRESSURE warning message on the DIC display pressure for those tires.) will appear at each ignition cycle until the tires are As an added safety inﬂated to the correct inﬂation pressure.
Page 521 Please note that the TPMS is not a substitute for tires or wheels on your vehicle to ensure that the proper tire maintenance, and it is the driver’s replacement or alternate tires and wheels allow responsibility to maintain correct tire pressure, the TPMS to continue to function properly.
Page 522 Resetting the TPMS Identiﬁcation Codes The TPMS sensor matching process is outlined below: Each TPMS sensor has a unique identiﬁcation 1. Set the parking brake. code. Any time you rotate your vehicle’s tires or replace one or more of the TPMS sensors, 2.
Page 523 6. Remove the valve cap from the valve cap stem. 11. Set all four tires to the recommended air Activate the TPMS sensor by increasing or pressure level as indicated on the Tire decreasing the tire’s air pressure for ﬁve and Loading Information label.
Page 524: Tire Inspection And Rotation
The Tire Pressure Monitor System (TPMS) Make sure the spare tire is stored securely. Push, operates on a radio frequency and complies with pull, and then try to rotate or turn the tire. If it RSS-210 of Industry and Science Canada. moves, use the ratchet/wheel wrench to tighten the Operation is subject to the following two cable.
Page 525 After the tires have been rotated, adjust the front and rear inﬂation pressures as shown on the CAUTION: tire and loading information label. See Loading Your Vehicle on page 411 and Inﬂation - Tire Rust or dirt on a wheel, or on the parts to Pressure on page 518, for more information.
Page 526: When It Is Time For New Tires
When It Is Time for New Tires Buying New Tires GM has developed and matched speciﬁc tires for One way to tell when it is your vehicle. The original equipment tires time for new tires is to installed on your vehicle, when it was new, were check the treadwear designed to meet General Motors Tire indicators, which will...
Page 527 CAUTION: CAUTION: Mixing tires could cause you to lose If you use bias-ply tires on your vehicle, control while driving. If you mix tires of the wheel rim ﬂanges could develop different sizes, brands, or types (radial cracks after many miles of driving. A tire and bias-belted tires), the vehicle may not and/or wheel could fail suddenly, causing handle properly, and you could have a...
Page 528: Different Size Tires And Wheels
Your vehicle’s original equipment tires are listed on the Tire and Loading Information Label. CAUTION: This label is attached to the vehicle’s center pillar (B-pillar). See Loading Your Vehicle on page 411, If you add different sized wheels, your for more information about the Tire and Loading Information Label and its location on your vehicle.
Page 529: Uniform Tire Quality Grading
Uniform Tire Quality Grading Treadwear The treadwear grade is a comparative rating Quality grades can be found where applicable on based on the wear rate of the tire when tested the tire sidewall between tread shoulder and under controlled conditions on a speciﬁed maximum section width.
Page 530: Wheel Alignment And Tire Balance
Temperature – A, B, C Wheel Alignment and Tire Balance The temperature grades are A (the highest), B, The tires and wheels on your vehicle were aligned and C, representing the tire’s resistance to and balanced carefully at the factory to give you the generation of heat and its ability to dissipate the longest tire life and best overall performance.
Page 531 Each new wheel should have the same Notice: The wrong wheel can also cause load-carrying capacity, diameter, width, offset and problems with bearing life, brake cooling, be mounted the same way as the one it speedometer or odometer calibration, replaces. headlamp aim, bumper height, vehicle ground clearance, and tire or tire chain clearance If you need to replace any of your wheels, wheel...
Page 532: Tire Chains
Tire Chains CAUTION: (Continued) CAUTION: readjust or remove the device if it is contacting your vehicle, and do not spin your vehicle’s wheels. If your vehicle has P265/65R18 or P275/ 55R20 size tires, do not use tire chains. If you do ﬁnd traction devices that will ﬁt, install them on the rear tires.
Page 533: If A Tire Goes Flat
If a Tire Goes Flat CAUTION: It is unusual for a tire to blowout while you are driving, especially if you maintain your vehicle’s tires properly. If air goes out of a tire, it is Lifting a vehicle and getting under it to do much more likely to leak out slowly.
Page 534: Changing A Flat Tire
Changing a Flat Tire CAUTION: (Continued) If a tire goes ﬂat, avoid further tire and wheel damage by driving slowly to a level place. Turn on 3. If you have a four-wheel-drive vehicle, your hazard warning ﬂashers. See Hazard Warning be sure the transfer case is in a drive Flashers on page 204 for more information.
Page 535: Removing The Spare Tire And Tools
Removing the Spare Tire and Tools When your vehicle has a ﬂat tire, use the following example as a guide to assist you in the placement The equipment you will need to change a ﬂat tire is of wheel blocks. stored under the storage tray, which is located on the driver’s side trim panel (over the rear wheelhouse).
Page 536 2. Remove the wing nut (B) used to retain the The tools you will be using include the following: tool bag by turning it counterclockwise. A. Jack D. Jack Handle B. Wheel Blocks Extensions 3. Turn the knob (A) on the jack counterclockwise to release the jack and C.
Page 537 To access the spare tire, refer to the following 1. Open the hoist shaft access door (C) on the graphics and instructions: bumper to access the spare tire lock (K). 2. Insert the ignition key, turn it clockwise and then pull it to remove the spare tire lock. 3.
Page 538 4. Insert the open end 6. Use the wheel of the extension (J) wrench hook that through the hole allows you to in the rear pull the hoist cable bumper (I) (hoist towards you, to shaft access hole). assist in reaching the spare tire.
Page 539: Removing The Flat Tire And Installing The Spare Tire
Removing the Flat Tire and If needed, ﬁnish loosening them by hand. The nut caps will not come off. Using the ﬂat Installing the Spare Tire end of the wheel wrench, pry along the edge of the cover until it comes off. Use the following pictures and instructions to If your vehicle has only wheel nut caps, remove the ﬂat tire and raise the vehicle.
Page 540 CAUTION: Getting under a vehicle when it is jacked up is dangerous. If the vehicle slips off the jack you could be badly injured or killed. Never get under a vehicle when it is supported only by a jack. CAUTION: Jacking Locations (Overall View) A.
Page 541 Raise the vehicle far enough off the ground so there is enough room for the spare tire to clear the ground. Front Position Front Tire Flat: If the ﬂat tire is on a front tire of the vehicle, you will need to use the jack Rear Position –...
Page 542 Rear Tire Flat: If the ﬂat tire is on a rear tire Raise the vehicle far enough off the ground so of the vehicle, you will need to use the there is enough room for the spare tire to jack handle (B) and both jack handle clear the ground.
Page 543 6. Remove any rust or dirt from the wheel CAUTION: bolts, mounting surfaces and spare Rust or dirt on the wheel, or on the parts wheel. to which it is fastened, can make the wheel nuts become loose after time. The wheel could come off and cause an accident.
Page 544 8. Tighten each wheel nut by hand. Then use Notice: Improperly tightened wheel nuts can the wheel wrench to tighten the nuts until the lead to brake pulsation and rotor damage. wheel is held against the hub. To avoid expensive brake repairs, evenly tighten the wheel nuts in the proper sequence 9.
Page 545: Secondary Latch System
When you reinstall the regular wheel and tire, you must also reinstall the either the center cap, or CAUTION: bolt-on hub cap, depending on what your vehicle has. For center caps, place the cap on the Before beginning this procedure read all wheel and tap it into place until it seats ﬂush with the wheel.
Page 546 2. If it is visible, ﬁrst try to tighten the cable by 7. Place the bottom turning the wheel wrench clockwise until you edge of the jack (A) hear two clicks or feel it skip twice. You on the wheel cannot overtighten the cable.
Page 547 9. Position the center lift point of the jack under 8. Attach the jack handle, extension, and wheel the center of the spare tire. wrench to the jack and place it (with the wheel blocks) under the vehicle toward the 10.
Page 548 11. Continue raising the jack until the spare tire 13. Disconnect the jack handle from the jack and stops moving upward and is held ﬁrmly in carefully remove the jack with the other hand. place so that the secondary latch has released 14.
Page 549: Storing A Flat Or Spare Tire And Tools
Storing a Flat or Spare Tire and 15. Tilt the tire retainer at the end of the Tools cable and pull it through the wheel opening. Pull the CAUTION: tire out from under the vehicle. Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury.
Page 550 Store the tire under the rear of the vehicle in the H. Spare Tire/Flat J. Hoist End of spare tire carrier. Refer to the following graphics Tire (Valve Stem Extension Tool and instructions to help you: Pointed Down) K. Spare Tire Lock Hoist Shaft Access Hole 1.
Page 551 2. Tilt the retainer 4. Insert the open end downward and of the extension (J) through the wheel through the hole opening. Make in the rear sure the retainer is bumper (I) (hoist fully seated shaft access hole). across the underside of the wheel.
Page 552 A. Wheel Blocks E. Jack 7. Make sure the tire is stored securely. Push, B. Tool Bag with F. Wing Nut pull (A), and then try to turn (B) the tire. If the Jack Tools Retaining Wheel tire moves, use the wheel wrench to tighten the cable.
Page 553 2. Assemble wheel blocks (A) and jack (E) together with the wing nut (F). 3. Position the jack (E) and wheel blocks (A) in the driver’s side trim panel over the wheelhouse. 4. Turn the wing nut (G) clockwise until the jack is secured tight in the mounting bracket.
Page 554: Spare Tire
Spare Tire Your vehicle may have a different size spare tire than the road tires originally installed on your Your vehicle, when new, had a fully-inﬂated spare vehicle. This spare tire was developed for use on tire. A spare tire may lose air over time, so check its your vehicle, so it is all right to drive on it.
Page 555: Appearance Care
Appearance Care Use glass cleaner only on glass. Remove any accidental over-spray from other surfaces immediately. To prevent over-spray, apply cleaner Cleaning the Inside of Your Vehicle directly to the cleaning cloth. Your vehicle’s interior will continue to look its Notice: If you use abrasive cleaners when best if it is cleaned often.
Page 556: Fabric/Carpet
Fabric/Carpet Do not clean your vehicle using the following cleaners or techniques: Use a vacuum cleaner with a soft brush • Never use a knife or any other sharp object to attachment frequently to remove dust and loose remove a soil from any interior surface. dirt.
Page 557: Leather
Leather To clean, use the following instructions: 1. Saturate a lint-free, clean white cloth with A soft cloth dampened with water may be used to water or club soda. remove dust. If a more thorough cleaning is 2. Wring the cloth to remove excess moisture. necessary, a soft cloth dampened with a mild soap solution can be used.
Page 558: Instrument Panel, Vinyl, And Other Plastic Surfaces
Instrument Panel, Vinyl, and Other Care of Safety Belts Plastic Surfaces Keep belts clean and dry. A soft cloth dampened with water may be used to remove dust. If a more thorough cleaning is CAUTION: necessary, a clean soft cloth dampened with a mild soap solution can be used to gently remove Do not bleach or dye safety belts.
Page 559: Washing Your Vehicle
Washing Your Vehicle Cleaning Exterior Lamps/Lenses The paint ﬁnish on the vehicle provides beauty, Use only lukewarm or cold water, a soft cloth and depth of color, gloss retention, and durability. a car washing soap to clean exterior lamps and lenses. Follow instructions under Washing The best way to preserve the vehicle’s ﬁnish is to Your Vehicle on page 559.
Page 560: Windshield, Backglass, And Wiper Blades
Windshield, Backglass, and Wiper Foreign materials such as calcium chloride and other salts, ice melting agents, road oil and tar, tree Blades sap, bird droppings, chemicals from industrial chimneys, etc., can damage your vehicle’s ﬁnish if If the windshield is not clear after using the they remain on painted surfaces.
Page 561: Aluminum Or Chrome-Plated Wheels And Trim
Aluminum or Chrome-Plated Wheels The surface of these wheels is similar to the painted surface of your vehicle. Do not use strong and Trim soaps, chemicals, abrasive polishes, abrasive cleaners, cleaners with acid, or abrasive cleaning Your vehicle may have either aluminum or brushes on them because you could damage chrome-plated wheels.
Page 562: Tires
Tires Finish Damage To clean the tires, use a stiff brush with tire Any stone chips, fractures or deep scratches in cleaner. the ﬁnish should be repaired right away. Bare metal will corrode quickly and may develop into Notice: Using petroleum-based tire dressing major repair expense.
Page 563: Underbody Maintenance
Underbody Maintenance Chemical Paint Spotting Chemicals used for ice and snow removal and Some weather and atmospheric conditions can dust control can collect on the underbody. If these create a chemical fallout. Airborne pollutants can are not removed, corrosion and rust can develop fall upon and attack painted surfaces on the on the underbody parts such as fuel lines, vehicle.
Page 564: Vehicle Care/Appearance Materials
Vehicle Care/Appearance Materials Description Usage Removes swirl marks, ﬁne Swirl Remover Polish scratches, and other light Description Usage surface contamination. Polishing Cloth Interior and exterior Removes light scratches Wax-Treated polishing cloth. Cleaner Wax and protects ﬁnish. Tar and Road Oil Removes tar, road oil, Cleans, shines, and Remover...
Page 565: Vehicle Identiﬁcation
Vehicle Identiﬁcation Service Parts Identiﬁcation Label This label is on the inside of the glove box. Vehicle Identiﬁcation Number (VIN) It is very helpful if you ever need to order parts. The label has the following information: • Vehicle Identiﬁcation Number (VIN) •...
Page 566: Windshield Wiper Fuses
Fuses and Circuit Breakers Your vehicle has an airbag system. Before attempting to add anything electrical to your The wiring circuits in your vehicle are protected vehicle, see Servicing Your Airbag-Equipped from short circuits by a combination of fuses, Vehicle on page 110. circuit breakers and fusible thermal links.
Page 567: Instrument Panel Fuse Block
Instrument Panel Fuse Block Fuses Usage AUX PWR2 Rear Cargo Area Power Outlets The instrument panel fuse block access door is SWC BKLT Steering Wheel Controls Backlight located on the driver’s side edge of the instrument Driver Door Module panel. Dome Lamps, Driver’s Side Turn CTSY Signal...
Page 568: Center Instrument Panel Fuse Block
Center Instrument Panel Fuse Block Fuses Usage AUX PWR Accessory Power Outlets The center instrument panel fuse block is IS LPS Interior Lamps located underneath the instrument panel, to the UNLCK1 Power Door Lock 1 (Unlock Feature) left of the steering column. Ultrasonic Rear Parking Assist, OBS DET Top View...
Page 569: Underhood Fuse Block
Underhood Fuse Block Harness Usage Connector HEADLINER 3 Headliner Harness Connector 3 HEADLINER 2 Headliner Harness Connector 2 HEADLINER 1 Headliner Harness Connector 1 BRAKE Brake Clutch Harness Connector CLUTCH Special Equipment Option Upﬁtter SEO/UPFITTER Harness Connector Circuit Breaker Usage Passenger’s Side Power Window Circuit Breaker Passenger’s Seat Circuit Breaker...
Page 570 Fuses Usage Fuses Usage Not Used Engine Controls Electronic Stability Suspension Engine Control Module, Throttle Control, Automatic Level Control Control Exhaust Right Trailer Stop/Turn Lamp Left Trailer Stop/Turn Lamp Front Washer...
Page 571 Fuses Usage Fuses Usage Oxygen Sensors Horn Anti-lock Brakes System 2 Passenger’s Side High-Beam Headlamp Trailer Back-up Lamps Daytime Running Lamps Driver’s Side Low-Beam Headlamp Driver’s Side High-Beam Headlamp Engine Control Module (Battery) Daylight Running Lamps 2 Fuel Injectors, Ignition Coils (Right Side) Sunroof, Emergency Roof Lamp Transmission Control Module...
Page 572 Fuses Usage J-Case Fuses Usage Not Used Heated Windshield Washer System Auxiliary Climate Control (Ignition), Four-Wheel Drive System Compass-Temperature Mirror Stud 1 (Trailer Connector Battery Rear Defogger Power) Airbag System (Battery) Mid-Bussed Electrical Center 1 SEO B1 Upﬁtter Usage (Battery) Climate Control Blower Cigarette Lighter, Auxiliary Power Power Liftgate Module...
Page 573: Capacities And Speciﬁcations
Capacities and Speciﬁcations The following approximate capacities are given in English and metric conversions. See Recommended Fluids and Lubricants on page 588 for more information. Capacities Application English Metric For the air conditioning system refrigerant charge amount, see the refrigerant caution label located Air Conditioning Refrigerant R134a under the hood.
Page 574 Capacities Application English Metric Transfer Case Fluid 2.0 qt 1.9 L Wheel Nut Torque 140 lb ft 190 Y †Oil ﬁlter should be changed at every oil change. After reﬁll, the level must be rechecked. Add enough engine coolant so that the ﬂuid is within the proper operating range.
Page 575: Maintenance Schedule
Section 6 Maintenance Schedule Maintenance Schedule ........ 576 Owner Checks and Services ..... 584 Introduction ..........576 At Each Fuel Fill ........585 Maintenance Requirements ......576 At Least Once a Month ......585 Your Vehicle and the Environment .... 576 At Least Once a Year .......
Page 576: Maintenance Schedule
Maintenance Schedule Maintenance Requirements Notice: Maintenance intervals, checks, Introduction inspections, replacement parts, and recommended ﬂuids and lubricants as Important: Keep engine oil at the proper level prescribed in this manual are necessary to and change as recommended. keep your vehicle in good working condition. Any damage caused by failure to follow scheduled maintenance might not be covered by warranty.
Page 577: Using The Maintenance Schedule
Using the Maintenance Schedule • are driven off-road in the recommended manner. See Off-Road Driving on page 377. We at General Motors want to help you keep your • use the recommended fuel. See Gasoline vehicle in good working condition. But we do Octane on page 453.
Page 578: Scheduled Maintenance
Scheduled Maintenance Some maintenance services can be complex. So, unless you are technically qualiﬁed and have When the CHANGE ENGINE OIL SOON message the necessary equipment, you should have your ® comes on, it means that service is required for GM Goodwrench dealer do these jobs.
Page 579 When the CHANGE ENGINE OIL SOON message Maintenance I — Use Maintenance I if the appears, certain services, checks, and inspections CHANGE ENGINE OIL SOON message comes on are required. Required services are described within 10 months since the vehicle was purchased in the following for “Maintenance I”...
Page 580 Scheduled Maintenance (cont’d) Service Maintenance I Maintenance II Check engine coolant and windshield washer ﬂuid levels and add ﬂuid as • • needed. Perform any needed additional services. See “Additional Required Services” in • • this section. • Inspect suspension and steering components. See footnote (b). •...
Page 581: Additional Required Services
Additional Required Services The following services should be performed at the ﬁrst maintenance service (I or II) after the indicated miles (kilometers) shown for each item. Additional Required Services 25,000 50,000 75,000 100,000 125,000 150,000 Service and Miles (Kilometers) (40 000) (80 000) (120 000) (160 000)
Page 582: Maintenance Footnotes
Additional Required Services (cont’d) 25,000 50,000 75,000 100,000 125,000 150,000 Service and Miles (Kilometers) (40 000) (80 000) (120 000) (160 000) (200 000) (240 000) Replace spark plugs and inspect spark • plug wires. An Emission Control Service. Engine cooling system service (or every ﬁve years, whichever occurs ﬁrst).
Page 583 (a) Visually inspect brake lines and hoses for (e) Make sure the safety belt reminder light and all proper hook-up, binding, leaks, cracks, chaﬁng, your belts, buckles, latch plates, retractors, and etc. Inspect disc brake pads for wear and rotors for anchorages are working properly.
Page 584: Owner Checks And Services
(h) Change automatic transmission ﬂuid and ﬁlter (k) Inspect system. Check all fuel and vapor lines if the vehicle is mainly driven under one or and hoses for proper hook-up, routing, and more of these conditions: condition. Check that the purge valve works properly, if equipped.
Page 585: At Each Fuel Fill
At Each Fuel Fill At Least Once a Month It is important to perform these underhood checks Tire Inﬂation Check at each fuel ﬁll. Visually inspect your vehicle’s tires and make Engine Oil Level Check sure they are inﬂated to the correct pressures. Do not forget to check the spare tire.
Page 586: At Least Once A Year
At Least Once a Year Automatic Transmission Shift Lock Control System Check Starter Switch Check CAUTION: CAUTION: When you are doing this inspection, the When you are doing this inspection, the vehicle could move suddenly. If the vehicle vehicle could move suddenly. If the vehicle moves, you or others could be injured.
Page 587 Ignition Transmission Lock Check Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular While parked, and with the parking brake set, try brake, set the parking brake. to turn the ignition to LOCK in each shift lever •...
Page 588: Recommended Fluids And Lubricants
Hood and Liftgate Support Gas Strut Recommended Fluids and Service Lubricants Visually inspect gas strut for signs of wear, Fluids and lubricants identiﬁed below by name, corrosion, cracks, loss of lubricant, or other part number, or speciﬁcation can be obtained from damage.
Page 589 Usage Fluid/Lubricant Usage Fluid/Lubricant ® Automatic DEXRON -VI Automatic Front Axle Transmission Transmission Fluid. Propshaft Spline or Spline Lubricant, Special Lubricant Multi-Purpose Lubricant, Superlube Key Lock One-Piece (GM Part No. U.S. 12345879, (GM Part No. U.S. 12346241, in Cylinders Propshaft in Canada 10953511) or lubricant Canada 10953474).
Page 590: Normal Maintenance Replacement Parts
Normal Maintenance Replacement Parts Replacement parts identiﬁed below by name, part number, or speciﬁcation can be obtained from your GM dealer. Normal Maintenance Replacement Parts ® ACDelco Part Part GM Part Number Number Engine Air Cleaner/Filter High Capacity Filter 15908915 A1518C Standard Filter 15908916...
Page 591: Engine Drive Belt Routing
Engine Drive Belt Routing...
Page 592: Maintenance Record
Maintenance Record After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. See Maintenance Requirements on page 576. Any additional information from Owner Checks and Services on page 584 can be added on the following record pages.
Page 593 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II...
Page 594 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II...
Page 595: Customer Assistance Information
Section 7 Customer Assistance Information Customer Assistance and Information ..596 Reporting Safety Defects ......612 Customer Satisfaction Procedure ....596 Reporting Safety Defects to the Online Owner Center ......... 598 United States Government ..... 612 Customer Assistance for Text Reporting Safety Defects to the Telephone (TTY) Users ......
Page 596: Customer Assistance And Information
Assistance prompt). In Canada, contact General Your satisfaction and goodwill are important Motors of Canada Customer Communication to your dealer/retailer and to GMC. Normally, any by calling 1-800-263-3777 (English) or concerns with the sales transaction or the operation of the vehicle will be resolved by your 1-800-263-7854 (French).
Page 597 STEP THREE — U.S. Owners: Both General You may contact the BBB Auto Line Program Motors and your dealer/retailer are committed to using the toll-free telephone number or write them making sure you are completely satisﬁed with your at the following address: new vehicle.
Page 598: Online Owner Center
Online Owner Center The program provides for the review of the facts involved by an impartial third party arbiter, Online Owner Center (United and may include an informal hearing before the arbiter. The program is designed so that the entire States only) dispute settlement process, from the time you The Owner Center is a resource for your GM...
Page 599: Customer Assistance For Text Telephone (Tty) Users
Here are a few of the valuable tools and services available at its Customer Assistance Center. Any you will have access to: TTY user can communicate with GMC by − My Showroom: Find and save information on dialing: 1-800-GMC-8583 (462-8583). (TTY users in Canada can dial 1-800-263-3830.)
Page 600: Customer Assistance Offices
GMC encourages customers to call the toll-free Customer Communication Centre, CA1-163-005 number for assistance. However, if a customer 1908 Colonel Sam Drive wishes to write or e-mail GMC, the letter should be Oshawa, Ontario L1H 8P7 addressed to: www.gmcanada.com United States...
Page 601: Gm Mobility Reimbursement Program
This program, available to qualiﬁed applicants, can a year. reimburse you up to $1,000 of the cost of eligible As the owner of a new GMC vehicle, you are aftermarket adaptive equipment required for automatically enrolled in the GMC Roadside your vehicle, such as hand controls or a Assistance program.
Page 602 Who is Covered? • Emergency Tow From a Public Roadway or Highway: Tow to the nearest dealership/ Roadside Assistance coverage is for the vehicle retailer for warranty service or in the event of operator, regardless of ownership. A person driving a vehicle-disabling accident.
Page 603 In the event of a warranty related vehicle In many instances, mechanical failures are covered disablement, while en route and over under GMC’s Bumper-to-Bumper warranty. 250 kilometres from original point of departure, However, when other services are utilized, our you may qualify for trip interruption expense Roadside Assistance Representatives will explain assistance.
Page 604: Courtesy Transportation
Courtesy Transportation for you and your family. Remember, we are only a phone call away. U.S. customers call GMC To enhance your ownership experience, we and Roadside Assistance: 1-800-462-8782, text our participating dealers/retailers are proud to offer telephone (TTY) users, call 1-888-889-2438.
Page 605 Several courtesy transportation options are If the dealer/retailer requests that you simply drop available to assist in reducing your inconvenience the vehicle off for service, you are urged to do when warranty repairs are required. so as early in the work day as possible to allow for the same day repair.
Page 606 Public Transportation or Fuel include minimum age requirements, insurance coverage, credit card, etc. You are responsible for Reimbursement fuel usage charges and may also be responsible for If your vehicle requires overnight warranty repairs, taxes, levies, usage fees, excessive mileage, or and public transportation is used as ‘shuttle rental usage beyond the completion of the repair.
Page 607: Vehicle Data Collection And Event Data Recorders
Vehicle Data Collection and Event readiness, airbag performance, and the severity of a collision. If your vehicle is Data Recorders ® equipped with StabiliTrak , steering performance, including yaw rate, steering Your vehicle, like other modern motor vehicles, wheel angle, and lateral acceleration, is also has a number of sophisticated computer recorded.
Page 608: Collision Damage Repair
In addition, once GM collects or receives data, collision repairs will diminish your vehicle’s resale GM may: value, and safety performance can be compromised in subsequent collisions. • use the data for GM research needs, Collision Parts • make it available for research where appropriate conﬁdentiality is to be Genuine GM Collision parts are new parts made maintained and need is shown, or...
Page 609 Insuring Your Vehicle Aftermarket collision parts are also available. These are made by companies other than GM and Protect your investment in your GM vehicle with may not have been tested for your vehicle. As a comprehensive and collision insurance coverage. result, these parts may ﬁt poorly, exhibit premature There are signiﬁcant differences in the quality durability/corrosion problems, and may not perform...
Page 610 If an Accident Occurs • If your vehicle cannot be driven, know where the towing service will be taking it. Get a card Here is what to do if you are involved in an from the tow truck operator or write down the accident.
Page 611 • Insurance pays the bill for the repair, but you must Choose a reputable collision repair facility for live with the repair. Depending on your policy your vehicle. Whether you select a GM dealer/ limits, your insurance company may initially value retailer or a private collision repair facility to ﬁx the repair using aftermarket parts.
Page 612: Reporting Safety Defects
Canada) in a situation like this, we certainly hope Safety Hotline toll-free at 1-888-327-4236 you will notify us. Please call us at (TTY: 1-800-424-9153); go to 1-800-GMC-8782 (1-800-462-8782), or write: http://www.safercar.gov; or write to: GMC Customer Assistance Center Administrator, NHTSA P.O.
Page 613: Service Publications Ordering Information
Transmission, Transaxle, Transfer In Canada, please call us at 1-800-263-3777 (English) or 1-800-263-7854 (French). Or, write: Case Unit Repair Manual General Motors of Canada Limited This manual provides information on unit repair Customer Communication Centre, CA1-163-005 service procedures, adjustments, and 1908 Colonel Sam Drive speciﬁcations for GM transmissions, transaxles, Oshawa, Ontario L1H 8P7...
Page 614 Owner Information ORDER TOLL FREE: 1-800-551-4123 Monday-Friday 8:00 AM - 6:00 PM Owner publications are written speciﬁcally for Eastern Time owners and intended to provide basic operational information about the vehicle. The owner For Credit Card Orders Only manual will include the Maintenance Schedule for (VISA-MasterCard-Discover), visit Helm, Inc.
Page 615 Airbag Systems (cont.) Passenger Sensing System ...... 104 Accessories and Modiﬁcations ..... 450 Servicing Your Airbag-Equipped Vehicle ..110 Adding a Snow Plow or Similar What Makes an Airbag Inﬂate? ....102 Equipment ..........418 Antenna, Rear Side Window ......356 Adding Equipment to Your Antenna, XM™...
Page 616 Appearance Care (cont.) Weatherstrips ........... 558 Battery ............493 Windshield, Backglass, and Electric Power Management ..... 221 Wiper Blades ........560 Run-Down Protection ....... 221 Ashtray ............227 Before Leaving on a Long Trip ....401 Audio System ..........292 Bench Seat, Split (60/40) ......
Page 617 Child Restraints Child Restraint Systems ......69 Calibration .......... 166, 168 Infants and Young Children ......65 California Fuel ..........453 Lower Anchors and Tethers for California Proposition 65 Warning ....451 Children ..........76 Canadian Owners ........... 3 Older Children ........... 62 Capacities and Speciﬁcations ......
Page 618 Cleaning (cont.) Cupholder(s) ..........190 Washing Your Vehicle ......559 Customer Assistance Information Weatherstrips ........... 558 Courtesy Transportation ......604 Windshield, Backglass, and Customer Assistance for Text Wiper Blades ........560 Telephone (TTY) Users ......599 Climate Control System ....... 227 Customer Assistance Offices ....
Page 619 Dome Lamp Override ........220 Dual Automatic Climate Control System ..231 Dome Lamps ..........220 Door Rear Seat Entertainment System ..... 340 Delayed Locking ........127 Locks ............126 Power Door Locks ........127 Programmable Automatic Door Locks ..128 Electrical System Rear Door Security Locks ......
Page 620 Engine (cont.) Fog Lamp Oil Life System ........466 Fog ............218 Overheated Protection Operating Mode ..480 Fog Lamp Light ........... 259 Overheating ..........478 Four-Wheel Drive ....... 154, 501 Starting ............ 145 Front Axle ........... 502 Entry Lighting ..........220 Fuel ............
Page 621 Headlamps (cont.) Halogen Bulbs ......... 506 Gage High/Low Beam Changer ......208 Engine Coolant Temperature ....252 On Reminder ........... 216 Fuel ............260 Heated Seats ..........12 Oil Pressure ..........257 Heater ............227 Speedometer ........... 244 Heater ............231 Tachometer ..........
Page 622 Light Airbag Readiness ........245 Jump Starting ..........494 Anti-Lock Brake System Warning ..... 251 Brake System Warning ......250 Charging System ........248 Cruise Control .......... 259 Keyless Entry System ......... 118 Fog Lamp ..........259 Keys ............117 Highbeam On ..........
Page 623 Locks Maintenance Schedule (cont.) Delayed Locking ........127 Owner Checks and Services ....584 Door ............126 Recommended Fluids and Lubricants ..588 Lockout Protection ........129 Scheduled Maintenance ......578 Power Door ..........127 Using ............577 Programmable Automatic Door Locks ..128 Your Vehicle and the Environment ....
Page 624 Outlets Accessory Power ........225 Navigation/Radio System, see Navigation Outside Manual ............. 340 Automatic Dimming Mirror ......174 New Vehicle Break-In ........143 Convex Mirror .......... 175 Normal Maintenance Replacement Parts ..590 Curb View Assist Mirrors ......174 Heated Mirrors ......... 175 Manual Mirrors .........
Page 625 Parking Assist ............222 Radios ............292 Brake ............160 Care of Your CD and DVD Player .... 356 Over Things That Burn ......163 Care of Your CDs and DVDs ....356 Passenger Airbag Status Indicator ....246 Navigation/Radio System, Passenger Sensing System ......
Page 626 Rear Seat Audio (RSA) ....... 352 Restraint System Check Rear Seat Entertainment System ....340 Checking the Restraint Systems ....112 Rear Seat Passengers, Safety Belts ....54 Replacing Restraint System Parts Rear Side Window Antenna ......356 After a Crash ........113 Rear Storage Area ........
Page 627 Safety Belts (cont.) Secondary Latch System ......545 Questions and Answers About Securing a Child Restraint Safety Belts ..........42 Center Front Seat Position ......88 Rear Safety Belt Comfort Guides ....57 Rear Seat Position ........85 Rear Seat Passengers ....... 54 Right Front Seat Position ......
Page 628 Speciﬁcations, Capacities ......573 Speedometer ..........244 Tachometer ..........244 Split Bench Seat (60/40) ....... 20 Taillamps ® StabiliTrak System ........367 Turn Signal, Stoplamps and ® StabiliTrak Indicator Light ......252 Back-up Lamps ........506 Starting Your Engine ........145 Theft-Deterrent, Radio .........
Page 629 Tires (cont.) Trailer If a Tire Goes Flat ........533 Recommendations ........446 Inﬂation - Tire Pressure ......518 Transmission Inspection and Rotation ......524 Fluid, Automatic ........471 Installing the Spare Tire ......539 Transmission Operation, Automatic ....149 Pressure Monitor System ......
Page 630 Vehicle Customization, DIC ......282 Where to Put the Restraint ......74 Vehicle Data Collection and Event Data Windows ............. 136 Recorders ..........607 Power ............137 Vehicle Identiﬁcation Windshield Number (VIN) .......... 565 Backglass, and Wiper Blades, Service Parts Identiﬁcation Label ....565 Cleaning ..........

GMC Yukon 2007 Owner's Manual

Section 1 Seats and Restraint Systems

Seats and Restraint Systems

Front Seats

Rear Seats

Safety Belts

Child Restraints

Airbag System

Restraint System Check

Section 2 Features and Controls

Keys

Doors and Locks

Windows

Theft-Deterrent Systems

Starting and Operating Your Vehicle

Mirrors

Onstar System

Universal Home Remote System

Storage Areas

Sunroof

Section 3 Instrument Panel

Instrument Panel Overview

Instrument Panel Brightness

Climate Controls

Warning Lights, Gages, and Indicators

Driver Information Center (DIC)

Audio System(S)

Section 4 Driving Your Vehicle

Your Driving, the Road, and Your Vehicle

Towing

Section 5 Service and Appearance Care

Service and Appearance Care

Service

Fuel

Checking Things under the Hood

Rear Axle

Four-Wheel Drive

Front Axle

Headlamp Aiming

Bulb Replacement

Windshield Wiper Blade Replacement

Tires

Appearance Care

Vehicle Identiﬁcation

Electrical System

Capacities and Speciﬁcations

Quick Links

Chapters

Related Manuals for GMC Yukon 2007

Summary of Contents for GMC Yukon 2007