Storage Areas; Glove Box; Cupholder(S) - GMC Yukon 2007 Owner's Manual

Hide thumbs Also See for Yukon 2007:

Table of Contents

Using Universal Home Remote

Press and hold the appropriate button for at

least half of a second. The indicator light will

come on while the signal is being transmitted.

Reprogramming Universal Home

Remote Buttons

You can reprogram any of the three buttons by

repeating the instructions.

Erasing Universal Home Remote

You should erase the programmed buttons when

you sell or terminate your lease.

To erase either Rolling Code or Fixed Code on

the Universal Home Remote device, do the

1. Press and hold the two outside buttons at the

same time for approximately 20 seconds, until

the indicator lights, located directly above

the buttons, begin to blink rapidly.

2. Once the indicator lights begin to blink,

release both buttons. The codes from all

buttons will be erased.

For help or information on the Universal Home

Remote System, call the customer assistance

phone number under Customer Assistance Offices

on page 600.

Storage Areas

Open the glove box by pulling up on the bottom of

Your vehicle may have cupholders located in the

front and rear of the ﬂoor console or in the

fold down armrest. The front cupholders can be

adjusted by moving the insert forward or rearward.

You may also have cupholders in the second

and third row seat armrest areas.

Table of Contents