GMC Sierra Classic 2007 Owner's Manual

GMC Sierra Classic 2007 Owner's Manual

Hide thumbs Also See for Sierra Classic 2007:
Table of Contents

Advertisement

Quick Links

2007 GMC Sierra Classic Owner Manual
Seats and Restraint Systems ....................... 7
Front Seats
.............................................. 9
Rear Seats
............................................. 19
Safety Belts
............................................ 22
Child Restraints
Airbag System
........................................ 88
Restraint System Check
Features and Controls .............................. 109
Keys
..................................................... 111
Doors and Locks
Windows
............................................... 125
Theft-Deterrent Systems
Starting and Operating Your Vehicle
Mirrors
.................................................. 175
®
OnStar
System
Universal Home Remote System
Storage Areas
...................................... 202
Sunroof
................................................ 205
...................................... 44
....................... 107
.................................. 116
....................... 128
..... 131
................................... 186
.......... 190
Instrument Panel ....................................... 207
Instrument Panel Overview
Climate Controls
Warning Lights, Gages, and Indicators
Driver Information Center (DIC)
Audio System(s)
Driving Your Vehicle ................................. 349
Your Driving, the Road, and Your
Vehicle
.............................................. 350
Towing
................................................. 417
Service and Appearance Care .................. 461
Service
................................................. 464
Fuel
...................................................... 466
Checking Things Under the Hood
Rear Axle
............................................. 523
Four-Wheel Drive
Front Axle
............................................ 525
M
................... 210
................................... 228
.... 242
............ 262
................................... 286
......... 474
.................................. 524
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sierra Classic 2007 and is the answer not in the manual?

Questions and answers

Summary of Contents for GMC Sierra Classic 2007

  • Page 1 2007 GMC Sierra Classic Owner Manual Seats and Restraint Systems ....... 7 Instrument Panel ........207 Front Seats ..........9 Instrument Panel Overview ....210 Rear Seats Climate Controls ..........19 ........228 Safety Belts Warning Lights, Gages, and Indicators ..........
  • Page 2 Noise Control System ......527 Maintenance Schedule ......609 Bulb Replacement ........ 528 Maintenance Schedule ......610 Windshield Wiper Blade Replacement ... 538 Customer Assistance Information ..... 633 Tires ............. 539 Customer Assistance and Information ... 634 Appearance Care ........585 Reporting Safety Defects ......
  • Page 3: Canadian Owners

    If the vehicle is sold, leave GENERAL MOTORS, GM, the GM Emblem, this manual in it so the new owner can use it. GMC, the GMC Truck Emblem, and the name SIERRA are registered trademarks of General Motors Corporation.
  • Page 4: How To Use This Manual

    How to Use This Manual CAUTION: Many people read the owner manual from beginning to end when they first receive their new vehicle. If this is done, it can help you learn These mean there is something that could about the features and controls for the vehicle. hurt you or other people.
  • Page 5: Vehicle Symbols

    Vehicle Damage Warnings Vehicle Symbols Also, in this manual you will find these notices: The vehicle has components and labels that use symbols instead of text. Symbols are shown along Notice: These mean there is something with the text describing the operation or that could damage your vehicle.
  • Page 6 These are some examples of symbols that may be found on the vehicle:...
  • Page 7: Table Of Contents

    Section 1 Seats and Restraint Systems Front Seats ............. 9 Rear Safety Belt Comfort Guides ....41 Manual Seats ..........9 Safety Belt Extender ........43 Power Seats ..........10 Child Restraints ..........44 Power Lumbar ..........11 Older Children ..........44 Heated Seats ..........
  • Page 8 Section 1 Seats and Restraint Systems Airbag System ..........88 Passenger Sensing System ......99 Where Are the Airbags? ......90 Servicing Your Airbag-Equipped Vehicle ..104 When Should an Airbag Inflate? ....91 Adding Equipment to Your What Makes an Airbag Inflate? ....93 Airbag-Equipped Vehicle ......
  • Page 9: Front Seats

    Front Seats To move a manual seat forward or rearward: Manual Seats CAUTION: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do 1.
  • Page 10: Power Seats

    Power Seats • Raise or lower the rear part of the seat cushion by moving the rear of the horizontal control up or down. • Raise or lower the entire seat by moving the entire horizontal control up or down. If your vehicle has power reclining seatbacks, the control is located rear of the power seat control on the outboard side of the seats.
  • Page 11: Power Lumbar

    Power Lumbar Heated Seats Your vehicle may have this feature. If your vehicle has this feature, the buttons are The control is located located on the front on the outboard side of doors. The engine must the seat cushion. be running for the heated seats to work.
  • Page 12: Memory Seat And Mirrors

    Memory Seat and Mirrors To heat only the seatback, press the vertical button with the heated seatback symbol. An indicator light on the seatback button will come on If your vehicle has this to designate that only the seatback is being feature, the controls for heated.
  • Page 13 To store the memory settings, do the following: To recall a memory position, do one of the following: 1. If you have an automatic transmission, place • If you have an automatic transmission, press the vehicle in PARK (P). and release the desired button 1 or 2 while If you have a manual transmission, set the the vehicle is in PARK (P).
  • Page 14 Easy Exit Seat To use the seat exit position, do one of the following: The controls for this memory function are located • If you have an automatic transmission, press on the driver’s door. and release the exit button on the memory control while the vehicle is in PARK (P).
  • Page 15: Reclining Seatbacks

    Reclining Seatbacks If your seats have manual reclining seatbacks, the lever used to operate them is located on the Manual Reclining Seatbacks outboard side of the seat(s). CAUTION: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving.
  • Page 16 Power Reclining Seatbacks To return the seatback to an upright position, do the following: If your seats have power reclining seatbacks, use 1. Lift the lever fully without applying pressure to the vertical power seat control located on the the seatback and the seatback will return to outboard side of the seat(s).
  • Page 17 CAUTION: (Continued) The shoulder belt cannot do its job because it will not be against your body. Instead, it will be in front of you. In a crash, you could go into it, receiving neck or other injuries. The lap belt cannot do its job either. In a crash, the belt could go up over your abdomen.
  • Page 18: Head Restraints

    Head Restraints Seatback Latches The front seatbacks tilt forward to allow access to the rear of the cab. To tilt the seatback forward, lift the lever located on the outboard side of the seat cushion. CAUTION: If the seatback is not locked, it could move forward in a sudden stop or crash.
  • Page 19: Rear Seats

    Rear Seats 2. Pull the seat cushion up until it latches with the seatback. 3. After latching the seat cushion up, pull Rear Seat Operation (Extended Cab) forward on it to make sure it is locked. Folding the Rear Seat The seat can also be folded down for more seating space.
  • Page 20: Rear Seat Operation (Crew Cab)

    Rear Seat Operation (Crew Cab) Notice: Folding a rear seat with the safety belts still fastened may cause damage to the The second row seat is a 60/40 split seat. Either seat or the safety belts. Always unbuckle side of the rear seat may be flipped and folded for the safety belts and return them to their normal added cargo space.
  • Page 21 To return the seat to the normal seating position, do the following: CAUTION: 1. Lift the seatback up and push it rearward all the way. A safety belt that is improperly routed, not properly attached, or twisted will not CAUTION: provide the protection needed in a crash.
  • Page 22: Safety Belts

    Safety Belts CAUTION: Safety Belts: They Are for Everyone It is extremely dangerous to ride in a This part of the manual tells you how to use cargo area, inside or outside of a vehicle. safety belts properly. It also tells you some things In a collision, people riding in these areas you should not do with safety belts.
  • Page 23 Why Safety Belts Work Your vehicle has a light that comes on as a When you ride in or on anything, you go as fast reminder to buckle up. as it goes. See Safety Belt Reminder Light on page 245. In most states and in all Canadian provinces, the law says to wear safety belts.
  • Page 24 Put someone on it. Get it up to speed. Then stop the vehicle. The rider does not stop.
  • Page 25 The person keeps going until stopped by or the instrument panel... something. In a real vehicle, it could be the windshield...
  • Page 26: Questions And Answers About Safety Belts

    Questions and Answers About Safety Belts Will I be trapped in the vehicle after an accident if I am wearing a safety belt? You could be — whether you are wearing a safety belt or not. But you can unbuckle a safety belt, even if you are upside down.
  • Page 27: How To Wear Safety Belts Properly

    How to Wear Safety Belts Properly If I am a good driver, and I never drive far from home, why should I wear safety belts? This part is only for people of adult size. You may be an excellent driver, but if you are Be aware that there are special things to know in an accident —...
  • Page 28 Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever had to. 3. Pick up the latch plate and pull the belt across you. Do not let it get twisted. The lap-shoulder belt may lock if you pull the belt across you very quickly.
  • Page 29 The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones. And you would be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen.
  • Page 30 What is wrong with this? CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against your body. The shoulder belt is too loose. It will not give nearly as much protection this way.
  • Page 31 What is wrong with this? CAUTION: You can be seriously hurt if your lap belt is too loose. In a crash, you could slide under the lap belt and apply force at your abdomen. This could cause serious or even fatal injuries. The lap belt should be worn low and snug on the hips, just touching the thighs.
  • Page 32 What is wrong with this? CAUTION: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not at the pelvic bones. This could cause serious internal injuries.
  • Page 33 What is wrong with this? CAUTION: You can be seriously injured if your belt goes over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt. The belt force would then be applied at the abdomen, not at the pelvic bones, and that could cause serious or fatal injuries.
  • Page 34 What is wrong with this? CAUTION: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the ribs, which are not as strong as shoulder bones.
  • Page 35 What is wrong with this? CAUTION: You can be seriously injured by a twisted belt. In a crash, you would not have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer/retailer to fix it.
  • Page 36: Safety Belt Use During Pregnancy

    To unlatch the belt, push the button on the buckle. A pregnant woman should wear a lap-shoulder The belt should go back out of the way. belt, and the lap portion should be worn as low as possible, below the rounding, throughout the Before you close the door, be sure the belt is out pregnancy.
  • Page 37: Right Front Passenger Position

    Right Front Passenger Position Center Front Passenger Position To learn how to wear the right front passenger’s Lap Belt safety belt properly, see Driver Position on If your vehicle has a front bench seat, someone page 27. can sit in the center position. The right front passenger’s safety belt works the same way as the driver’s safety belt —...
  • Page 38: Rear Seat Passengers

    Rear Seat Passengers It is very important for rear seat passengers to buckle up! Accident statistics show that unbelted people in the rear seat are hurt more often in crashes than those who are wearing safety belts. Rear passengers who are not safety belted can be thrown out of the vehicle in a crash.
  • Page 39 Lap-Shoulder Belt Pull up on the latch plate to make sure it is secure. All rear seat positions have lap-shoulder belts. When the shoulder belt is pulled out all the Here is how to wear one properly. way, it will lock. If it does, let it go back all the way and start again.
  • Page 40 the lap belt. If you slid under it, the belt would apply force at your abdomen. This could cause serious or even fatal injuries. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces.
  • Page 41: Rear Safety Belt Comfort Guides

    There is one guide for each outboard passenger position in the rear seat. Here is how to install a comfort guide to the shoulder belt: 1. Remove the guide from its storage clip on the interior body. To unlatch the belt, push the button on the buckle. Rear Safety Belt Comfort Guides Rear shoulder belt comfort guides may provide added safety belt comfort for older children...
  • Page 42 CAUTION: A safety belt that is not properly worn may not provide the protection needed in a crash. The person wearing the belt could be seriously injured. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces.
  • Page 43: Safety Belt Extender

    Safety Belt Extender If the vehicle’s safety belt will fasten around you, you should use it. But if a safety belt is not long enough, your dealer/retailer will order you an extender. When you go in to order it, take the heaviest coat you will wear, so the extender will be long enough for you.
  • Page 44: Child Restraints

    Child Restraints What is the proper way to wear safety belts? Older Children An older child should wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face or neck. The lap belt should fit snugly below the hips, just touching the top of the thighs.
  • Page 45 What if a child is wearing a lap-shoulder belt, but the child is so small that the CAUTION: shoulder belt is very close to the child’s face or neck? Never do this. If the child is sitting in a seat next to a Here two children are wearing the same window, move the child toward the center of belt.
  • Page 46 CAUTION: Never do this. Here a child is sitting in a seat that has a lap-shoulder belt, but the shoulder part is behind the child. If the child wears the belt in this way, in a crash the child might slide under the belt.
  • Page 47: Infants And Young Children

    Infants and Young Children CAUTION: Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the Children can be seriously injured or traveler changes the need, for everyone, to use strangled if a shoulder belt is wrapped safety restraints.
  • Page 48 CAUTION: People should never hold a baby in their arms while riding in a vehicle. A baby does not weigh much — until a crash. During a crash a baby will become so heavy it is not possible to hold it. For example, in a crash at only 25 mph (40 km/h), a 12 lb (5.5 kg) baby will suddenly become a 240 lb (110 kg) force...
  • Page 49 CAUTION: Children who are up against, or very close to, any airbag when it inflates can be seriously injured or killed. Airbags plus lap-shoulder belts offer protection for adults and older children, but not for young children and infants. Neither the vehicle’s safety belt system nor its airbag system is designed for them.
  • Page 50 What are the different types of add-on child restraints? CAUTION: Add-on child restraints, which are purchased by the vehicle’s owner, are available in four basic Newborn infants need complete support, types. Selection of a particular restraint should including support for the head and neck. take into consideration not only the child’s This is necessary because a newborn weight, height, and age but also whether or not...
  • Page 51: Child Restraint Systems

    Child Restraint Systems CAUTION: The body structure of a young child is quite unlike that of an adult or older child, for whom the safety belts are designed. A young child’s hip bones are still so small that the vehicle’s regular safety belt may not remain low on the hip bones, as it should.
  • Page 52 A rear-facing infant seat (B) provides restraint with A forward-facing child seat (C-E) provides restraint the seating surface against the back of the for the child’s body with the harness and also infant. The harness system holds the infant in sometimes with surfaces such as T-shaped place and, in a crash, acts to keep the infant or shelf-like shields.
  • Page 53 How Should I Use a Child Restraint? A child restraint system is any device designed for use in a motor vehicle to restrain, seat, or position children. A built-in child restraint system is a permanent part of the motor vehicle. An add-on child restraint system is a portable one, which is purchased by the vehicle’s owner.
  • Page 54 Securing an Add-on Child Restraint in To help reduce the chance of injury, the child restraint must be secured in the vehicle. Child the Vehicle restraint systems must be secured in vehicle seats by lap belts or the lap belt portion of a lap-shoulder belt, or by the LATCH system.
  • Page 55 Securing the Child Within the Child Restraint CAUTION: There are several systems for securing the child A child can be seriously injured or killed within the child restraint. One system, the three-point harness, has straps that come down in a crash if the child is not properly over each of the infant’s shoulders and buckle secured in the child restraint.
  • Page 56: Where To Put The Restraint

    Where to Put the Restraint CAUTION: (Continued) Accident statistics show that children are safer if they are restrained in the rear rather than the front inflating airbag. Be sure the airbag is off seat. We recommend that child restraints be before using a rear-facing child restraint secured in a rear seat including an infant riding in in the right front seat position.
  • Page 57 If your vehicle does not have a rear seat that will If your vehicle has the passenger sensing system accommodate a rear-facing child restraint, we or the airbag off switch and you need to secure recommend that rear-facing child restraints not be a rear-facing child restraint in the right front transported in your vehicle, even if the airbag is off.
  • Page 58: Lower Anchors And Tethers For Children (Latch)

    Lower Anchors and Tethers for Not all vehicle seating positions or child restraints have lower anchors and attachments or top Children (LATCH) tether anchors and attachments. The LATCH system holds a child restraint during Lower Anchors driving or in a crash. This system is designed to make installation of a child restraint easier.
  • Page 59 Top Tether Anchor Your child restraint may have a single tether (A) or a dual tether (C). Either will have a single attachment (B) to secure the top tether to the anchor. Some child restraints that have a top tether are designed for use with or without the top tether being attached.
  • Page 60 Lower Anchor and Top Tether Anchor (Top Tether Anchor): Locations Seating positions with top tether anchors. (Top Tether Anchor): Seating positions with top tether anchors. Regular Cab Front Seat — Bench Do not install a child restraint in the center front Regular Cab Front seat position.
  • Page 61 For crew cab models, the rear passenger side and (Top Tether Anchor): center seating positions have exposed metal Seating positions with lower anchors located in the crease between the top tether anchors. seatback and the seat cushion. (Lower Anchor): For extended cab models, the rear outboard Seating positions with seating positions have exposed metal lower two lower anchors.
  • Page 62 Extended Cab For extended cab models, the top tether anchors are located near the top of the seatback for Regular Cab each rear seating position. In addition to the top For regular cab models with a bench seat, the top tether anchors, each seating position has a tether anchors are located under trim covers on the fabric loop at the top of the seatback that you will...
  • Page 63 Do not secure a child restraint in the front passenger’s position if your vehicle has rear seats, if a national or local law requires that the top tether be attached, or if the instructions that come with the child restraint say that the top tether must be attached.
  • Page 64 Securing a Child Restraint Designed for the LATCH System CAUTION: Each top tether anchor, except the center CAUTION: top tether anchor in an extended cab model, and lower anchors in the vehicle If a LATCH-type child restraint is not are designed to hold only one child attached to anchors, the restraint will not restraint.
  • Page 65 Folding an empty rear seat with the safety belts secured may cause damage to the safety CAUTION: belt or the seat. When removing the child restraint, always remember to return the safety Children can be seriously injured or belts to their normal, stowed position before strangled if a shoulder belt is wrapped folding the rear seat.
  • Page 66 1.4. Route, attach, and tighten the top tether If the position you are according to your child restraint using has an adjustable instructions and the following head restraint and instructions: you are using a dual tether, route the If the position you are tether around the head using does not have a restraint.
  • Page 67 2. See Securing a Child Restraint in the Right 2. If the child restraint manufacturer recommends Front Seat Position (With Airbag Off Switch) that the top tether be attached, attach and on page 74 or Securing a Child Restraint tighten the top tether to the top tether anchor, in the Right Front Seat Position (With if your vehicle has one.
  • Page 68 2.2. When using a child restraint with a top tether in the rear passenger position, raise the head restraint and route the top tether through the fabric loop. Then, attach the top tether to the metal anchor point at the center rear seating position.
  • Page 69 Crew Cab Models 1.3. Route the top tether according to your child restraint instructions and the 1. If the child restraint manufacturer recommends following instructions: that the top tether be attached, attach and If the position you are tighten the top tether to the top tether anchor, using does not have a if your vehicle has one.
  • Page 70 If the position you are 1.4. Remove the trim cover to expose the using has an adjustable top tether anchor. head restraint and 1.5. Attach the top tether attachment to the you are using a dual top tether anchor. tether, route the tether around the head restraint.
  • Page 71: Securing A Child Restraint In A Rear Seat Position

    Securing a Child Restraint in a Rear 2. Attach and tighten the lower attachments to the lower anchors. If the child restraint does Seat Position not have lower attachments or the desired seating position does not have lower anchors, Extended Cab and Crew Cab secure the child restraint with the top tether and the safety belts.
  • Page 72 3. Buckle the belt. Make sure the release button 4. Pull the rest of the shoulder belt all the way is positioned so you would be able to unbuckle out of the retractor to set the lock. the safety belt quickly if you ever had to.
  • Page 73 6. If your child restraint manufacturer recommends using a top tether, attach and tighten the top tether to the top tether anchor. Refer to the instructions that came with the child restraint and to Lower Anchors and Tethers for Children (LATCH) on page 58. 7.
  • Page 74: Securing A Child Restraint In The Center Front Seat Position

    Securing a Child Restraint in the If your instrument panel has one of the switches pictured in the following illustrations, your vehicle Center Front Seat Position has an airbag off switch that you can use to manually turn off the right front passenger’s airbag. CAUTION: A child in a child restraint in the center front seat can be badly injured or killed by...
  • Page 75 CAUTION: (Continued) CAUTION: no one can guarantee that an airbag will A child in a rear-facing child restraint can not deploy under some unusual be seriously injured or killed if the circumstance, even though it is turned off. passenger’s airbag inflates. This is We recommend that rear-facing child because the back of the rear-facing child restraints be transported in vehicles with...
  • Page 76 If your vehicle does not have a rear seat that will accommodate a rear-facing child restraint, we CAUTION: recommend that rear-facing child restraints not be transported in your vehicle, even if the airbag is off. If the airbag readiness light in the instrument panel cluster ever comes on CAUTION: when you have turned off the airbag, it...
  • Page 77 If your vehicle has a rear seat, there is no top tether and stay lit when you turn the ignition to anchor at the right front seating position. Do not RUN or START. See Airbag Off Light secure a child seat in this position if a national or on page 246.
  • Page 78 5. Pull the rest of the shoulder belt all the way 6. To tighten the belt, push down on the child out of the retractor to set the lock. restraint, pull the shoulder belt to tighten the lap belt portion and feed the shoulder belt back into the retractor.
  • Page 79 7. If your child restraint manufacturer recommends using a top tether, and the CAUTION: position you are using has a top tether anchor, attach and tighten the top tether to the top If the right front passenger’s airbag is tether anchor. Refer to the instructions that came with the child restraint and to Lower turned off for a person who is not in a risk Anchors and Tethers for Children (LATCH)
  • Page 80: Securing A Child Restraint In The Right Front Seat Position (With Passenger Sensing System)

    Securing a Child Restraint in the Right Front Seat Position (With Passenger Sensing System) Your vehicle has a right front passenger airbag. A rear seat is a safer place to secure a forward-facing child restraint. See Where to Put Canada the Restraint on page 56.
  • Page 81 CAUTION: (Continued) CAUTION: If you need to secure a forward-facing A child in a rear-facing child restraint can child restraint in the right front seat, be seriously injured or killed if the right always move the front passenger seat as front passenger’s airbag inflates.
  • Page 82 You will be using the lap-shoulder belt to secure 2. Put the child restraint on the seat. the child restraint in this position. Be sure to follow 3. Pick up the latch plate, and run the lap and the instructions that came with the child restraint. shoulder portions of the vehicle’s safety belt Secure the child in the child restraint when and as through or around the restraint.
  • Page 83 5. Pull the rest of the shoulder belt all the way 6. To tighten the belt, push down on the child out of the retractor to set the lock. restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt, and feed the shoulder belt back into the retractor.
  • Page 84 7. If your child restraint manufacturer If, after reinstalling the child restraint and restarting recommends using a top tether, and the the vehicle, the on indicator is still lit, check to position you are using has a top tether anchor, make sure that the vehicle’s seatback is not attach and tighten the top tether to the top pressing the child restraint into the seat cushion.
  • Page 85: Securing A Child Restraint In The Right Front Seat Position (Heavy Duty Crew Cab Only)

    Securing a Child Restraint in the If your child restraint has the LATCH system, see Lower Anchors and Tethers for Children Right Front Seat Position (Heavy (LATCH) on page 58. Duty Crew Cab Only) There is no top tether anchor in the right front passenger’s position.
  • Page 86 3. Pick up the latch plate, and run the lap and shoulder portions of the vehicle’s safety belt through or around the restraint. The child restraint instructions will show you how. 5. Pull the rest of the shoulder belt all the way out of the retractor to set the lock.
  • Page 87 feed the shoulder belt back into the retractor. If you are using a forward-facing child restraint, you may find it helpful to use your knee to push down on the child restraint as you tighten the belt. You should not be able to pull more of the belt out of the retractor once the lock has been set.
  • Page 88: Airbag System

    Airbag System CAUTION: (Continued) Your vehicle has the following airbags: • Airbags are “supplemental restraints” to A frontal airbag for the driver. the safety belts. All airbags are designed • A frontal airbag for the right front passenger. to work with safety belts, but do not Airbags are designed to supplement the protection replace them.
  • Page 89 CAUTION: (Continued) CAUTION: protection for adults, but not for young Airbags inflate with great force, faster children and infants. Neither the vehicle’s than the blink of an eye. If you are too safety belt system nor its airbag system is close to an inflating airbag, as you would designed for them.
  • Page 90: Where Are The Airbags

    Where Are the Airbags? The right front passenger’s airbag is in the instrument panel on the passenger’s side. The driver’s airbag is in the middle of the steering wheel.
  • Page 91: When Should An Airbag Inflate

    events and are used to predict how severe a crash is likely to be in time for the airbags to inflate CAUTION: and help restrain the occupants. Whether your frontal airbags will or should deploy is not based If something is between an occupant and on how fast your vehicle is traveling.
  • Page 92 Single Stage vs. Dual Stage Airbags The frontal airbags (driver and right front passenger) are not intended to inflate during Depending on the weight of your vehicle, you will vehicle rollovers, rear impacts, or in many have either “Single Stage Airbags” or “Dual side impacts.
  • Page 93: What Makes An Airbag Inflate

    Single Stage Airbags The threshold level can vary, however, with specific vehicle design, so that it can be somewhat If your vehicle has frontal airbags with single stage above or below this range. deployment and your vehicle goes straight into Vehicle’s with dual stage airbags also have a wall that does not move or deform, the threshold special sensors which enable the sensing system...
  • Page 94: How Does An Airbag Restrain

    How Does an Airbag Restrain? What Will You See After an Airbag Inflates? In moderate to severe frontal or near-frontal collisions, even belted occupants can contact the After an airbag inflates, it quickly deflates, so steering wheel or the instrument panel. The quickly that some people may not even realize the airbag supplements the protection provided by airbag inflated.
  • Page 95 In many crashes severe enough to inflate an airbag, windshields are broken by vehicle deformation. CAUTION: Additional windshield breakage may also occur from the right front passenger airbag. When an airbag inflates, there may be • Airbags are designed to inflate only once. After dust in the air.
  • Page 96: Airbag Off Switch

    Airbag Off Switch This switch should only be turned to the off position if the person in the right front passenger’s If your instrument panel has one of the switches position is a member of a passenger risk group pictured in the following illustrations, your vehicle identified by the national government as follows: has an airbag off switch that you can use to Infant.
  • Page 97 Child age 1 to 12. A child age 1 to 12 must ride in the front seat because: CAUTION: • my vehicle has no rear seat; • although children ages 1 to 12 ride in the rear If the right front passenger’s airbag is seat(s) whenever possible, children turned off for a person who is not in a risk ages 1 to 12 sometimes must ride in the front...
  • Page 98 CAUTION: If the airbag readiness light ever comes on when you have turned off the airbag, it means that something may be wrong with the airbag system. The right front passenger’s airbag could inflate even though the switch is off. If this ever happens, do not let anyone whom the national government has identified as a United States...
  • Page 99: Passenger Sensing System

    United States United States Canada To turn the right front passenger’s airbag on again, insert your ignition key into the switch, push Canada in, and move the switch to the on position. The words ON and OFF or the symbol for on and Passenger Sensing System off, will be visible on the rearview mirror during the system check.
  • Page 100 The passenger sensing system will turn off the right front passenger’s frontal airbag under certain CAUTION: conditions. The driver’s airbag is not part of the passenger sensing system. A child in a rear-facing child restraint can The passenger sensing system works with be seriously injured or killed if the right sensors that are part of the right front passenger’s front passenger’s airbag inflates.
  • Page 101 If your vehicle does not have a rear seat that will When the passenger sensing system has turned accommodate a rear-facing child restraint, we off the passenger’s frontal airbag, the off indicator recommend that rear-facing child restraints not be will light and stay lit to remind you that the transported in your vehicle, even if the airbag is off.
  • Page 102 If the on indicator is still lit, secure the child in the Everyone in your vehicle who has outgrown child restraint in a rear seat position in the child restraints should wear a safety belt vehicle if one is available and check with properly —...
  • Page 103 CAUTION: If the airbag readiness light in the instrument panel cluster ever comes on and stays on, it means that something may be wrong with the airbag system. If this ever happens, have the vehicle serviced promptly, because an adult-size person sitting in the right front passenger’s seat may not have the protection of the airbag(s).
  • Page 104: Servicing Your Airbag-Equipped Vehicle

    Servicing Your Airbag-Equipped Aftermarket equipment, such as seat covers, can affect how well the passenger sensing system Vehicle operates. You may want to consider not using seat covers or other aftermarket equipment if your Airbags affect how your vehicle should be vehicle has the passenger sensing system.
  • Page 105: Adding Equipment To Your Airbag-Equipped Vehicle

    Adding Equipment to Your CAUTION: Airbag-Equipped Vehicle For up to 10 seconds, after the ignition is Is there anything I might add to the front of turned off and the battery is disconnected, the vehicle that could keep the airbags an airbag can still inflate during improper from working properly? service.
  • Page 106 What if I added a snow plow? Will it keep Because I have a disability, I have to get my the airbags from working properly? vehicle modified. How can I find out whether this will affect my advanced airbag We have designed our airbag systems to work system? properly under a wide range of conditions, Changing or moving any parts of the front...
  • Page 107: Restraint System Check

    Restraint System Check Also look for any opened or broken airbag covers, and have them repaired or replaced. The airbag system does not need regular maintenance. Checking the Restraint Systems Notice: If you damage the covering for the Now and then, make sure the safety belt reminder driver’s or the right front passenger’s airbag, light and all your belts, buckles, latch plates, the airbag may not work properly.
  • Page 108: Replacing Restraint System Parts After A Crash

    Replacing Restraint System Parts If you have had a crash, do you need new belts or LATCH system parts? After a Crash After a very minor collision, nothing may be necessary. But if the belts were stretched, as they would be if worn during a more severe crash, CAUTION: then you need new parts.
  • Page 109: Features And Controls

    Section 2 Features and Controls Keys ............111 Starting and Operating Your Vehicle ..131 Remote Keyless Entry (RKE) System ..112 New Vehicle Break-In ........ 131 Remote Keyless Entry (RKE) System Ignition Positions ........132 Operation ..........113 Retained Accessory Power (RAP) ..... 134 Starting the Engine ........
  • Page 110 Section 2 Features and Controls ® Mirrors ............175 OnStar System .......... 186 Manual Rearview Mirror ......175 Universal Home Remote System ....190 Automatic Dimming Rearview Mirror System Identification ........190 ® with OnStar , Compass and Universal Home Remote System ....190 Temperature Display ......
  • Page 111: Keys

    Keys CAUTION: Leaving children in a vehicle with the ignition key is dangerous for many reasons, children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows will function with the keys in the ignition and they could be seriously injured or killed if caught in the path of a...
  • Page 112: Remote Keyless Entry (Rke) System

    Remote Keyless Entry (RKE) Your vehicle has one double-sided key System for the ignition, all door locks, and the If the vehicle has a Remote Keyless Entry (RKE) spare tire hoist lock if system operates on a radio frequency subject your vehicle has one.
  • Page 113: Remote Keyless Entry (Rke) System Operation

    Remote Keyless Entry (RKE) At times you may notice a decrease in range. This is normal for any RKE system. If the transmitter System Operation does not work or if you have to stand closer to your vehicle for the transmitter to work, try this: You can lock and unlock your doors from about •...
  • Page 114 Battery Replacement (Lock): Press this button once to lock all of the doors. Pressing lock again within three seconds Under normal use, the battery in your RKE may cause the horn to chirp for lock confirmation. transmitter should last about two years. You can choose different feedback options for each You can tell the battery is weak if the transmitter press of the lock button.
  • Page 115 Resynchronization To replace the battery in the RKE transmitter, do the following: Resynchronization may be necessary due to the security method used by this system. The transmitter does not send the same signal twice to the receiver. The receiver will not respond to a signal that has been sent previously.
  • Page 116: Doors And Locks

    Doors and Locks CAUTION: (Continued) Door Locks • Young children who get into unlocked vehicles may be unable to get out. A child can be overcome by extreme CAUTION: heat and can suffer permanent injuries or even death from heat stroke. Always lock your vehicle whenever Unlocked doors can be dangerous.
  • Page 117: Power Door Locks

    To unlock the door from the outside, use the Press the recessed side of the switch with the Remote Keyless Entry (RKE) transmitter or unlock symbol, to unlock all the doors at once. the key. If your vehicle has this To unlock or lock the power door lock switch, door from the inside,...
  • Page 118: Delayed Locking

    Delayed Locking Programmable Automatic Door Locks If your vehicle is a crew cab, it may have this feature. When locking the doors with the power Your vehicle may have an automatic lock/unlock lock switch or the Remote Keyless Entry (RKE) feature which enables you to program your transmitter and a door is open, the doors will not vehicle’s power door locks.
  • Page 119 To enter the program mode, do the following: You can exit the program mode any time by turning the ignition to RUN (the doors will 1. Begin with the ignition off. Then pull the turn automatically lock and unlock and the horn will signal/multifunction lever toward you and hold chirp twice to indicate that you are leaving it there while you perform the next step.
  • Page 120 Mode 3: All doors unlock when the key is 3. Press the door unlock switch once. You will removed from the ignition. This is the mode that is hear one, two, three, or four chimes. The pre-programmed in the factory for manual number of chimes tells you which unlock mode transmission vehicles.
  • Page 121: Rear Door Security Locks (Crew Cab)

    Rear Door Security Locks 3. To disengage the lock, move the lever rearward. (Crew Cab) 4. Close the door. With this feature, you can lock the rear side doors 5. Do the same thing to the other rear door. so that they cannot be opened from the inside The rear doors of your vehicle cannot be opened by passengers.
  • Page 122: Rear Doors

    Rear Doors To open a rear access door from the inside, the Extended Cab front door must be opened first. Then, use Your vehicle may have a rear access door(s) that the handle located on allows easier access to the rear area of the the inside of the rear extended cab.
  • Page 123: Tailgate

    Tailgate You can open the tailgate by lifting up on its handle while pulling the tailgate toward you. To shut the tailgate, firmly push it upward until CAUTION: it latches. After you put the tailgate back up, pull it back It is extremely dangerous to ride on the towards you to be sure it latches securely.
  • Page 124 Tailgate Removal 2. With the tailgate at a slight upward angle, The tailgate on your vehicle can be removed to pull back on the allow for different loading situations. Although the tailgate at the right tailgate can be removed without assistance, edge and then you may want someone to assist you with the move the tailgate to...
  • Page 125: Windows

    Windows CAUTION: Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather.
  • Page 126: Power Windows

    Power Windows CAUTION: (Continued) CAUTION: When there are children in the rear seat use the window lockout button to prevent unintentional operation of the windows. Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome from extreme heat in warm or hot weather and suffer permanent injuries or even death from heat stroke.
  • Page 127: Swing-Out Windows

    The driver’s door has a switch for the passenger’s This feature prevents all windows from operating, and rear windows as well. Your power windows except from the driver’s position. Press the will work when the ignition has been turned switch to engage or disengage the lockout feature. to ACCESSORY or RUN or when Retained An indicator light on the switch will come on Accessory Power (RAP) is active.
  • Page 128: Sliding Rear Window

    Sliding Rear Window Theft-Deterrent Systems If your vehicle has this feature, squeeze the latch Vehicle theft is big business, especially in some in the center of the window and slide the glass cities. Although your vehicle has a number of to open.
  • Page 129 This message reminds you to activate the The theft-deterrent system will not activate if you theft-deterrent system. Here is how to do it: lock the doors with a key, the manual door lock, or the power door lock switch. It activates only if you 1.
  • Page 130: Passlock

    ® Testing the Alarm Passlock The alarm can be tested by following these steps: ® Your vehicle has the Passlock theft-deterrent system. 1. From inside the vehicle, lower the driver’s window and open the driver’s door. ® Passlock is a passive theft-deterrent system. ®...
  • Page 131: Starting And Operating Your Vehicle

    Starting and Operating Your • Avoid making hard stops for the first 200 miles (322 km) or so. During this time Vehicle the new brake linings are not yet broken in. Hard stops with new linings can mean premature wear and earlier New Vehicle Break-In replacement.
  • Page 132: Ignition Positions

    Ignition Positions A (LOCK): This position locks your ignition when the key is removed. The steering locks when With the key in the ignition switch, you can turn it equipped with a manual transmission. It is to four different positions. a theft-deterrent feature.
  • Page 133 Key Release Button C (RUN): This is the position for driving. (Manual Transmission) The battery could be drained if you leave the key in the ACCESSORY or RUN position with the The ignition key cannot engine off. You may not be able to start your be removed from the vehicle if the battery is allowed to drain for ignition of manual...
  • Page 134: Retained Accessory Power (Rap)

    Retained Accessory Power (RAP) Automatic Transmission Move your shift lever to PARK (P) or If the vehicle has Retained Accessory Power NEUTRAL (N). Your engine will not start in any (RAP), certain features will continue to operate for other position — that is a safety feature. To restart up to 10 minutes after the ignition key is turned when you are already moving, use NEUTRAL (N) to LOCK unless a door is opened.
  • Page 135 Starting Procedure Notice: Holding your key in START for longer than 15 seconds at a time will disengage 1. With your foot off the accelerator pedal, turn the starter motor, cause your battery to be the ignition key to START. When the engine drained much sooner, and add excessive heat starts, let go of the key.
  • Page 136: Engine Coolant Heater

    Engine Coolant Heater When starting your engine in very cold weather (below 0°F or −18°C), do this: In very cold weather, 0°F (−18°C) or colder, the 1. With your foot off the accelerator pedal, turn engine coolant heater can help. You will get easier the ignition key to START and hold it there up starting and better fuel economy during engine to 15 seconds.
  • Page 137 To Use the Engine Coolant Heater 4. Before starting the engine, be sure to unplug and store the cord as it was before to keep it 1. Turn off the engine. away from moving engine parts. If you do 2. Open the hood and unwrap the electrical not, it could be damaged.
  • Page 138: Automatic Transmission Operation

    Automatic Transmission Operation See “Range Selection Mode” later in this section. PARK (P): This position locks your rear wheels. If your vehicle has an automatic transmission, It is the best position to use when you start it features an electronic shift position indicator your engine because your vehicle cannot move within the instrument panel cluster.
  • Page 139 CAUTION: CAUTION: It is dangerous to get out of your vehicle If you have four-wheel drive, your vehicle if the shift lever is not fully in PARK (P) will be free to roll — even if your shift with the parking brake firmly set. Your lever is in PARK (P) —...
  • Page 140 To rock your vehicle back and forth to get out of Notice: Shifting out of PARK (P) or snow, ice, or sand without damaging your NEUTRAL (N) with the engine running at high transmission, see If Your Vehicle is Stuck in Sand, speed may damage the transmission.
  • Page 141 ® ® If your vehicle has the Allison Transmission , it The Allison Transmission also uses adaptive shift will shift into first range when DRIVE (D) is controls. Adaptive shift controls continually selected. As vehicle speed increases, the compares key shift parameters to pre-programmed ®...
  • Page 142 THIRD (3): This position is also used for normal FIRST (1): For an automatic transmission, this driving. However, it reduces vehicle speed position reduces vehicle speed even more more than DRIVE (D) without using your brakes. than SECOND (2) without using your brakes. You You might choose THIRD (3) instead of DRIVE (D) can use it on very steep hills, or in deep snow when driving on hilly, winding roads, when...
  • Page 143 Range Selection Mode (Allison 2. Press the plus/minus buttons to select the desired range of gears for your current ® Transmission driving conditions. The Range Selection Mode allows you to control the engine and vehicle speed while driving down hill by allowing you to select a desired gear.
  • Page 144 Low Traction Mode (Allison Cold Weather Operation (Allison ® ® Transmission Transmission ® If your vehicle has the DURAMAX diesel engine On cold days, approximately 32°F (0°C) or colder, ® and the Allison Transmission , it has a Low your automatic transmission is designed to shift Traction Mode that assists in vehicle acceleration differently.
  • Page 145: Tow/Haul Mode

    Tow/Haul Mode The selector button is located on the end of the shift lever. Turn the Tow/Haul on and off by pressing the button. When the Tow/Haul is on, a light on the instrument panel cluster will come on. See Tow/Haul Mode Light on page 261 for more information.
  • Page 146 Tow/Haul Mode (Allison The selector button is located on the end of the shift lever. Turn the Tow/Haul on and off by ® Transmission pressing the button. When the Tow/Haul is on, a light on the instrument panel cluster will come on. See Tow/Haul Mode Light on page 261 for more information.
  • Page 147: Manual Transmission Operation

    Manual Transmission Operation Cruise Grade Braking is available on the 6.6L ® DURAMAX diesel engine. Cruise Grade Braking Five-Speed monitors a vehicle’s cruise state, engine torque, acceleration, vehicle speed, and the cruise set (VORTEC™ 6.0L V8 Engine) speed. Using this information, it detects when the truck is accelerating on a downhill grade and will Here is how to operate automatically downshift to slow the vehicle if it...
  • Page 148 FIRST (1): Press the clutch pedal and shift into Notice: If you try to shift down into FIRST (1). Then, slowly let up on the clutch pedal SECOND (2) at excessive vehicle speeds, as you press the accelerator pedal. Shift into clutch or engine damage could occur.
  • Page 149 REVERSE (R): To back up, first press down the You can shift into FIRST (1) when you are going clutch pedal. Wait for the vehicle to stop moving less than 20 mph (32 km/h). If you have come to a and then, shift into REVERSE (R).
  • Page 150 Shift Speeds NEUTRAL: Use this position when you start or idle your engine. REVERSE (R): To back up, first press down the CAUTION: clutch pedal. Wait for the vehicle to stop moving and then, shift into REVERSE (R). Let up on the clutch pedal slowly while pressing the If you skip a gear when you downshift, accelerator pedal.
  • Page 151: Four-Wheel Drive

    If your engine speed drops below 600 rpm, or if When this light comes on, you can shift to the next the engine is not running smoothly, you should higher gear if weather, road and traffic conditions downshift to the next lower gear. When operating allow.
  • Page 152 Front Axle Locking Feature A 4WD indicator light comes on when you The front axle locks and unlocks automatically shift into four-wheel when you shift the transfer case. Some delay for drive and the front axle the axle to lock or unlock is normal. engages.
  • Page 153 An indicator light near the lever shows you the transfer case settings: CAUTION: Notice: Driving on clean, dry pavement in four-wheel drive for an extended period of time Shifting the transfer case to NEUTRAL can cause premature wear on your vehicle’s can cause your vehicle to roll even if the powertrain.
  • Page 154 When Using the Manual Transfer Case 2H (Two-Wheel Drive High): This setting is used for driving in most street and highway situations. • Shifting should be made using quick The front axle is not engaged in two-wheel motions. Shifting slowly may make it drive.
  • Page 155 Shifting from 2H (Two-Wheel Drive High) Shifting In or Out of 4L to 4H (Four-Wheel Drive High) (Four-Wheel Drive Low) • Shifts between 2H and 4H can be made at Notice: Shifting the transfer case into 4L any vehicle speed. while moving at speeds faster than 3 mph (5 km/h) may cause premature wear to •...
  • Page 156 Shifting In or Out of NEUTRAL Recommended Transfer Case Settings Transfer Case Settings 1. With the vehicle running and the engine at an Driving idle set the parking brake and apply the AUTO Conditions regular brake. 2. Place the transmission into NEUTRAL (N). Normal Variable Shift the transfer case in one continuous motion...
  • Page 157 Indicator lights in the switches show the current (Two-Wheel Drive High): This setting is setting. The indicator lights will come on briefly used for driving in most street and highway when you turn on the ignition and the last chosen situations.
  • Page 158 Shifting into Four-Wheel Drive High or (Four-Wheel Drive High): Use this setting AUTO 4WD (Automatic Four-Wheel Drive) when you need extra traction, such a on snowy or icy roads or in most off-road situations. Press and release the Four-Wheel Drive High This setting also engages your front axle to help or AUTO 4WD switch.
  • Page 159 Shifting into Four-Wheel Drive Low Notice: Shifting the transmission into gear before the Four-Wheel Drive Low indicator light Notice: Shifting the transfer case into has stopped flashing could damage the Four-Wheel Drive Low while moving at speeds transfer case. To help avoid damaging your faster than 3 mph (5 km/h) may cause vehicle, always wait for the Four-Wheel premature wear to the transfer case, and may...
  • Page 160 Shifting Out of Four-Wheel Drive Low The transfer case may make noise and the vehicle may jerk when the transfer case is shifted To shift from Four-Wheel Drive Low to Four-Wheel between Four-Wheel Drive Low and Four-Wheel Drive High, AUTO 4WD, or Two-Wheel Drive Drive High ranges or from NEUTRAL with the High, your vehicle must be stopped or moving less engine running.
  • Page 161 Shifting Into NEUTRAL 4. Put the transmission in NEUTRAL (N). 5. Shift the transfer case to Two-Wheel Drive High. CAUTION: 6. Simultaneously press and hold the Two-Wheel Drive High and Four-Wheel Drive Low buttons Shifting the transfer case to NEUTRAL for 10 seconds.
  • Page 162 Shifting Out of NEUTRAL Electronic Transfer Case To shift out of NEUTRAL: If your four-wheel-drive 1. Set the parking brake and apply the regular vehicle has the brake pedal. electronic transfer case, the transfer case 2. Turn the ignition to RUN with the engine off. switches are located to 3.
  • Page 163 Use these switches to shift into and out of four-wheel drive. You can choose among CAUTION: three driving settings: Indicator lights in the switches show you which Shifting the transfer case to NEUTRAL setting you are in. The indicator lights will come on can cause your vehicle to roll even if the briefly when you turn on the ignition and the last transmission is in PARK (P).
  • Page 164 Shifting from Two-Wheel Drive High or (Four-Wheel Drive Low): This setting also Four-Wheel Drive High to Four-Wheel engages your front axle to give you extra traction. You may never need Four-Wheel Drive Low Drive Low. It sends the maximum power to all To shift from Two-Wheel Drive High or Four-Wheel four wheels.
  • Page 165 Shifting from Four-Wheel Drive Low to If the Four-Wheel Drive Low switch is pressed when your vehicle is in gear and/or moving, Four-Wheel Drive High or Two-Wheel the Four-Wheel Drive Low indicator light will flash Drive High for 30 seconds and not complete the shift To shift from Four-Wheel Drive Low to Four-Wheel unless your vehicle is moving slower than 3 mph Drive High or Two-Wheel Drive High, your...
  • Page 166 Shifting into NEUTRAL 5. Simultaneously press and hold the Two-Wheel Drive High and Four-Wheel Drive Low buttons for 10 seconds. The red NEUTRAL light will CAUTION: come on when the transfer case shift to NEUTRAL is complete. 6. Start the engine if it is not already running. Shifting the transfer case to NEUTRAL can cause your vehicle to roll even if the 7.
  • Page 167 Shifting Out of NEUTRAL 5. Release the parking brake prior to moving the vehicle. To shift out of NEUTRAL: 6. You may start the engine and shift the 1. Set the parking brake and press and hold the transmission to the desired position. regular brake pedal.
  • Page 168: Parking Brake

    Parking Brake To release the parking brake, hold the regular brake pedal down. Pull the bottom edge of To set the parking brake, hold the regular brake the lever, located above the parking brake pedal, pedal down with your right foot. Push down with the parking brake symbol, to release the the parking brake pedal with your left foot.
  • Page 169: Shifting Into Park (P) (Automatic Transmission)

    Shifting Into Park (P) (Automatic CAUTION: (Continued) Transmission) lever is in PARK (P). So, be sure the transfer case is in a drive gear — not in CAUTION: NEUTRAL. If you are pulling a trailer, see Towing a Trailer on page 423. It can be dangerous to get out of your vehicle if the shift lever is not fully in 1.
  • Page 170 Leaving Your Vehicle With the Engine If you have to leave your vehicle with the engine running, be sure your vehicle is in PARK (P) Running (Automatic Transmission) and the parking brake is firmly set before you leave it. After you move the shift lever into PARK (P), hold the regular brake pedal down.
  • Page 171: Shifting Out Of Park (P) (Automatic Transmission)

    If torque lock does occur, you may need to have These larger parts may sometimes make a another vehicle push yours a little uphill to clunking noise when the selector lever is moved take some of the pressure from the parking pawl from DRIVE (D) or REVERSE (R) to PARK (P).
  • Page 172: Parking Over Things That Burn

    Parking Over Things That Burn CAUTION: Things that can burn could touch hot exhaust parts under your vehicle and ignite. Do not park over papers, leaves, dry grass, or other things that can burn.
  • Page 173: Engine Exhaust

    Engine Exhaust CAUTION: (Continued) • CAUTION: Your vehicle was damaged when driving over high points on the road or over road debris. Engine exhaust can kill. It contains the • Repairs were not done correctly. gas carbon monoxide (CO), which you •...
  • Page 174: Running The Engine While Parked

    Running the Engine While Parked CAUTION: It is better not to park with the engine running. But if you ever have to, here are some things to know. It can be dangerous to get out of your vehicle if the automatic transmission shift CAUTION: lever is not fully in PARK (P) with the parking brake firmly set.
  • Page 175: Mirrors

    Mirrors CAUTION: Manual Rearview Mirror Four-wheel drive vehicles with the transfer Pull or push the tab under the inside rearview case in NEUTRAL will allow the vehicle to mirror to adjust it to the night or daytime setting. In roll, even if the automatic transmission the nighttime setting, the glare from headlamps shift lever is in PARK (P).
  • Page 176 Temperature and Compass Display Automatic Dimming Mirror Operation Press the on/off button, located to the far The automatic dimming mirror function is turned on left, briefly to turn the compass/temperature automatically each time the ignition is started. To display on or off. operate the automatic dimming mirror, do the following: If the display reads CAL, you will need to calibrate...
  • Page 177 Compass variance is the difference between earth’s 3. Keep pressing the on/off button until the magnetic north and true geographic north. If not desired zone number appears in the adjusted to account for compass variance, your display. Release the button. After compass could give false readings.
  • Page 178: Automatic Dimming Rearview Mirror With Compass And Temperature Display

    Automatic Dimming Rearview The compass can be calibrated by driving the vehicle in circles at 5 mph (8 km/h) or less until the Mirror with Compass and display reads a direction. Temperature Display Passenger Airbag Indicator If the vehicle is equipped with an automatic mirror, it The vehicle may be equipped with a passenger will, when on, automatically dim to the proper level airbag indicator, on the mirror glass, just above the...
  • Page 179 Compass Calibration If an abnormal reading is displayed, for an extended period of time, please consult your The compass may need calibration if one of the dealer. Under certain circumstances, a delay in following occurs: updating the temperature is normal. •...
  • Page 180 Compass Variance The mirror is set in zone eight upon leaving the factory. It will be necessary to adjust the compass to compensate for compass variance if you live outside zone eight. Under certain circumstances, as during a long distance cross-country trip, it will be necessary to adjust for compass variance.
  • Page 181: Outside Manual Mirrors

    Passenger Airbag Indicator Outside Trailer-Tow Mirrors The mirror may be equipped with a passenger airbag indicator on the mirror glass, just above the buttons. If the vehicle has this feature the mirror will display the word ON, or an airbag symbol in Canada, when the passenger airbag is enabled.
  • Page 182 If your vehicle is equipped with this style trailering-type mirror, they can be adjusted so you can have a clear view of the objects behind you. If your vehicle is equipped with this trailer towing Adjust each mirror by turning it left or right. Once type mirror, they can be adjusted so you can the mirror is adjusted to the correct position, have a clear view of the objects behind you.
  • Page 183: Outside West Coast-Type Mirrors

    Outside West Coast-Type Mirrors Outside Power Mirrors If your vehicle is equipped with these mirrors, they If your vehicle is can be adjusted so you can have a clear view equipped with power of objects behind you. outside mirrors, the A.
  • Page 184: Outside Power Foldaway Mirrors

    Outside Power Foldaway Mirrors control to fold or unfold the mirrors. You may notice the mirror glass adjust as the mirrors fold in; this is normal. The mirror glass will reposition If your vehicle is itself once the mirrors are unfolded. equipped with this feature, the controls are If the mirrors are accidentally folded/unfolded...
  • Page 185: Outside Automatic Dimming Mirror

    Outside Automatic Dimming Mirror This feature can be turned on or off through the Driver Information Center (DIC). See Driver If your vehicle is equipped with this feature, Information Center (DIC) on page 262 for more the driver’s outside mirror will adjust for the glare information.
  • Page 186: Outside Heated Mirrors

    Outside Heated Mirrors services. If your airbags deploy, the system is ® designed to make an automatic call to OnStar The vehicle may have outside heated mirrors which Emergency advisors who can request emergency helps clear them of condensation, snow, and ice. services be sent to your location.
  • Page 187 ® OnStar Services • Stolen Vehicle Location Assistance • AccidentAssist ® For new vehicles with OnStar , the Safe & Sound ® Plan, or the Directions & Connections Plan is • Remote Door Unlock/Vehicle Alert included for one year from the date of purchase. ®...
  • Page 188 ® ® OnStar Hands-Free Calling OnStar Steering Wheel Controls ® OnStar Hands-Free Calling allows eligible Your vehicle may have a Talk/Mute button that ® ® OnStar subscribers to make and receive calls can be used to interact with OnStar Hands-Free using voice commands.
  • Page 189 The vehicle information usually includes your GPS Your vehicle must have a working electrical location and, in the event of a crash, additional system (including adequate battery power) for the ® information regarding the accident that your vehicle OnStar equipment to operate. There are other ®...
  • Page 190: Universal Home Remote System

    Universal Home Remote System System Identification Your vehicle may have a Universal Home Remote System. If there are three round LED indicator lights above Determine which Universal Home Remote your the Universal Home Remote buttons, follow the vehicle has and then read the pages following for instructions under Universal Home Remote System instructions on programming your specific system.
  • Page 191: Universal Home Remote System Operation (With One Triangular Led)

    Universal Home Remote System This device complies with Part 15 of the FCC Rules. Operation is subject to the following Operation (With One Triangular LED) two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
  • Page 192 Programming the Universal Home Read the instructions completely before attempting to program the Universal Home Remote. Remote System Because of the steps involved, it may be helpful to Follow these steps to program up to three devices: have another person available to assist you in the programming steps 1.
  • Page 193 4. The indicator light will flash slowly at first and 6. Locate in the garage, the garage door opener then rapidly after Universal Home Remote receiver (motor-head unit). Locate the “Learn” successfully receives the frequency signal or “Smart” button. This can usually be from the hand-held transmitter.
  • Page 194 Gate Operator and Canadian Using Universal Home Remote Programming Press and hold the appropriate Universal Home Remote button for at least half of a second. Canadian radio-frequency laws require transmitter The indicator light will come on while the signal is signals to time out or quit after several seconds being transmitted.
  • Page 195: Universal Home Remote System Operation (With Three Round Led)

    Reprogramming a Single Universal Universal Home Remote System Home Remote Button Operation (With Three Round LED) To program a device to Universal Home Remote using a Universal Home Remote button previously trained, follow these steps: 1. Press and hold the desired Universal Home Remote button.
  • Page 196 Read the instructions completely before attempting Programming a garage door opener involves to program the transmitter. Because of the steps time-sensitive actions, so read the entire procedure involved, it may be helpful to have another before you begin. If you do not follow these person available to assist you in programming the actions, the device will time out and you will have transmitter.
  • Page 197 3. Immediately return to your vehicle. Press and hold the universal home remote button that you would like to use to control the garage door until the garage door moves. The indicator light, above the selected button, should slowly blink. You may need to hold the button from five to 20 seconds.
  • Page 198 Programming Universal Home Follow these steps to program up to three devices: Remote — Fixed Code Most garage door openers sold before 1996 are Fixed Code units. Programming a garage door opener involves time-sensitive actions, so read the entire procedure before you begin.
  • Page 199 Example of Eight Dip Switches with Two Positions Example of Eight Dip Switches with Three Positions Your panel of switches may not appear exactly as they do in the examples above, but they should be similar. The switch positions on your hand-held transmitter may be labeled, as follows: •...
  • Page 200 2. Write down the eight to 12 switch settings from left to right as follows: • When a switch is in the up position, write “Left.” • When a switch is in the down position, write “Right.” • If a switch is set between the up and down position, write “Middle.”...
  • Page 201 Reprogramming Universal Home 5. After entering all of the switch positions, again, firmly press and release all Remote Buttons three buttons at the same time. The You can reprogram any of the three buttons by indicator lights will turn on. repeating the instructions.
  • Page 202: Storage Areas

    Storage Areas Center Console Storage Area Your vehicle may have a console compartment Glove Box between the bucket seats. To open it, press the button located on the right Open the glove box by pulling up on the bottom of side of the front of the lid.
  • Page 203: Tonneau Cover

    Tonneau Cover If your vehicle has a tonneau cover, follow the directions below to remove the cover. 1. To remove, unsnap the cover. Roll it up and stow it using the buckle and strap located at the front of the box. A.
  • Page 204 4. To add cargo to the box, remove all bows and the back rail and stow them safely. To clean the tonneau cover, use mild soap and water. If necessary, use a soft bristle brush 3. Remove the three bows by gently pushing them against the spring-loaded end.
  • Page 205: Sunroof

    Sunroof The sunroof also has a roller sunscreen that can be used to block the rays of the sun. The roller The vehicle may have a power sliding sunroof. To sunscreen can be manually operated with open or close the sunroof, the ignition must be the sunroof in an open or closed position.
  • Page 206 ✍ NOTES...
  • Page 207 Section 3 Instrument Panel Instrument Panel Overview ......210 Accessory Power Outlet(s) ......226 Hazard Warning Flashers ......212 Ashtray(s) and Cigarette Lighter ....227 Other Warning Devices ......213 Climate Controls ......... 228 Horn ............213 Climate Control System ......228 Tilt Wheel ..........
  • Page 208 Section 3 Instrument Panel Malfunction Indicator Lamp ......256 AM-FM Radio ..........288 Oil Pressure Gage ........259 Radio with CD ........... 291 Security Light ..........260 Radio with Cassette and CD ..... 300 Cruise Control Light ........260 Radio with Six-Disc CD ......313 Highbeam On Light ........
  • Page 209 ✍ NOTES...
  • Page 210: Instrument Panel Overview

    Instrument Panel Overview Automatic Transmission Version shown, Manual Transmission Version similar...
  • Page 211 The main components of your instrument panel are the following: A. Dome Lamp Override Button. See Dome Lamp J. Audio System. See Audio System(s) on Override on page 225. page 286. B. Headlamp Controls. See Headlamps on K. Climate Control System. See Climate Control page 220.
  • Page 212: Hazard Warning Flashers

    Hazard Warning Flashers S. Cigarette Lighter. See Ashtray(s) and Cigarette Lighter on page 227. The hazard warning flashers warn others. They T. Accessory Power Outlet. See Accessory Power also let police know you have a problem. Outlet(s) on page 226. Your front and rear turn signal lamps will flash on U.
  • Page 213: Other Warning Devices

    Other Warning Devices If you carry reflective triangles, you can set them up at the side of the road about 300 feet (100 m) behind your vehicle. Horn To sound the horn, press the center pad on the steering wheel. Tilt Wheel The tilt wheel will allow you to adjust the steering wheel before you drive.
  • Page 214: Turn Signal/Multifunction Lever

    Turn Signal/Multifunction Lever • Windshield Washer. See Windshield Washer on page 217. • Cruise Control. See Cruise Control on page 217. For information on the headlamps, see Headlamps on page 220. Turn and Lane-Change Signals The turn signal has two upward (for right) and two downward (for left) positions.
  • Page 215: Headlamp High/Low-Beam Changer

    Headlamp High/Low-Beam Changer An arrow on the instrument panel cluster will flash in the (Headlamp High/Low Beam Changer): direction of the turn or To change the headlamps from low to high beam, lane change. push the lever toward the instrument panel. To return to low-beam headlamps, pull the multifunction lever toward you.
  • Page 216: Flash-To-Pass

    Flash-to-Pass Heavy snow or ice can overload the wiper motor. A circuit breaker will stop the motor until it cools down. This feature lets you use your high-beam Clear away snow or ice to prevent an overload. headlamps to signal a driver in front of you that The windshield wipers are controlled by turning the you want to pass.
  • Page 217: Windshield Washer

    Windshield Washer Cruise Control (Washer Fluid): There is a paddle marked (Off): Move the with the windshield washer symbol at the top switch to this position to of the multifunction lever. To spray washer fluid on turn off the cruise the windshield, push the paddle.
  • Page 218 Setting Cruise Control (Set): Press this button to set the speed. With cruise control, the vehicle can maintain a speed of about 25 mph (40 km/h) or more CAUTION: without keeping your foot on the accelerator. This can really help on long trips. Cruise control does not work at speeds below about If you leave your cruise control on when 25 mph (40 km/h).
  • Page 219 Resuming a Set Speed • Move the cruise switch from on to resume/ accelerate. Hold it there until you get up to the Suppose you set your cruise control at a desired speed you want, and then release the it. To speed and then you apply the brake.
  • Page 220: Headlamps

    Using Cruise Control on Hills Headlamps How well your cruise control will work on hills depends upon your speed, load and the steepness of the hills. When going up steep hills, you may want to step on the accelerator pedal to maintain your speed.
  • Page 221: Headlamps On Reminder

    Daytime Running Lamps (DRL) (Parking Lamps): Turn the control to this position to turn on the parking lamps, together with Daytime Running Lamps (DRL) can make it easier the following: for others to see the front of your vehicle during •...
  • Page 222: Automatic Headlamp System

    Automatic Headlamp System The DRL and automatic headlamp system will only be affected when the light sensor detects a change When it is dark enough outside, the automatic in lighting lasting longer than the delay. headlamp system will turn on the headlamps at the If you start your vehicle in a dark garage, the normal brightness, along with the taillamps, automatic headlamp system will come on...
  • Page 223: Fog Lamps

    Fog Lamps Press the button to turn the fog lamps on or off. An indicator light will glow in the button when If your vehicle has fog lamps, use them for better the fog lamps are on. vision in foggy or misty conditions. Remember, fog lamps alone will not give off as much light as the headlamps.
  • Page 224: Auxiliary Roof Mounted Lamp

    Auxiliary Roof Mounted Lamp Instrument Panel Brightness If your vehicle has this feature, this button includes (Instrument Panel Brightness): This wiring provisions for a dealer or a qualified feature controls the brightness of the instrument service center to install an auxiliary roof lamp. panel lights.
  • Page 225: Dome Lamp Override

    Dome Lamp Override Exit Lighting With exit lighting, the interior lamps will come on (Dome Lamp Override): You can use the when the key is removed from the ignition. dome override button, located below the exterior They will turn off automatically in 20 seconds. The lamps control, to set the dome lamps to come lights will not come on if the dome override on automatically when a door is opened, or...
  • Page 226: Cargo Lamp

    Cargo Lamp another accessory power outlet in the rear cargo area. If the vehicle has a floor console, there is an outlet inside the storage bin and one on the rear of The cargo lamp button the floor console. is located on the left side of the instrument To use an outlet, remove the protective cap.
  • Page 227: Ashtray(S) And Cigarette Lighter

    Ashtray(s) and Cigarette Lighter Notice: Adding any electrical equipment to your vehicle may damage it or keep other Your vehicle may have a front ashtray located near components from working as they should. The the center of the instrument panel. Pull on the repairs would not be covered by your door to open it.
  • Page 228: Climate Controls

    Climate Controls Temperature Knob The middle knob on the control panel lets you select the temperature of the air flowing into the Climate Control System passenger area. Turn the knob clockwise toward the red area for warmer air. Turn the knob counterclockwise toward the blue area for cooler air.
  • Page 229: Dual Climate Control System

    Dual Climate Control System (Floor): This mode directs most of the air through the floor outlets, and the rest of the air is With this system you can control the heating, divided between the windshield defroster outlets cooling, and ventilation for your vehicle. and the side window defroster outlets.
  • Page 230 Mode Control (Recirculation): The recirculation mode is used to recirculate the air inside of your vehicle. To change the current mode, select one of the Use this mode to help prevent outside odors and/or following: dust from entering your vehicle or to help cool the (Vent): This mode directs air to the instrument air inside of your vehicle more quickly.
  • Page 231 Defogging and Defrosting Temperature Control Driver’s Side: The lever on the left side of the Fog on the inside of the windows is a result of climate control panel is used to raise or lower the high humidity (moisture) condensing on the temperature on the driver’s side of the vehicle.
  • Page 232 The rear window defogger will automatically turn (Defrost): This mode directs most of the air to off several minutes after the button is pressed. the windshield and the side window outlets, with Pressing the button while the defogger is running only a little air directed to the floor outlets.
  • Page 233: Dual Automatic Climate Control System

    Dual Automatic Climate Control Driver’s Side Temperature Knob System The driver’s side knob is used to adjust the temperature of the air coming through the system With this system, you can control the heating, on the driver’s side. The temperature can be cooling, and ventilation in your vehicle.
  • Page 234 Passenger’s Side Temperature Knob Automatic Operation The passenger’s side knob can be used to change AUTO (Automatic): When automatic operation is the temperature of the air coming through the active the system will control the inside system on the passenger’s side of the vehicle. The temperature, the air delivery, and the fan speed.
  • Page 235 When AUTO is selected, the air conditioning Be careful not to cover the solar sensor operation and air inlet will be automatically located on the top of the instrument panel controlled. The air conditioning compressor will near the windshield. This sensor regulates air run when the outside temperature is over temperature based on sun intensity.
  • Page 236 Manual Operation (Bi-Level): This mode directs warmer air to the floor and cooler air to the instrument You may manually adjust the air delivery mode or panel outlets. fan speed. (Floor): This mode directs air to the (Fan): The switch with the fan symbol floor outlets.
  • Page 237 Display If you select recirculation while in defrost, defog, or floor, the light in the button will flash and then go If you press the mode button to select an air out to let you know that this is not allowed. This delivery mode, the display will change to show you is normal and helps to prevent fogging.
  • Page 238: Air Conditioning

    Air Conditioning entering the vehicle. If you select A/C off while in front defrost, defog or recirculation, the A/C (Air Conditioning): Press this button to turn snowflake symbol will turn off, but the A/C compressor will still run to help prevent fogging. the air conditioning (A/C) compressor on and off.
  • Page 239 Sensors There is an interior temperature sensor located next to the steering wheel that measures the temperature of the air inside your vehicle. The solar sensor, located in the defrost grille, that There is also an exterior temperature sensor is in the middle of the instrument panel, monitors located behind the front grille.
  • Page 240 In order to prevent false temperature readings at (Defog): Use this setting to clear the windows startup, the displayed temperature will not of fog or moisture. Press the mode button to change until the following occurs: select this setting. This setting will deliver air to the floor and windshield outlets.
  • Page 241: Outlet Adjustment

    Operation Tips The rear window defogger will automatically turn off several minutes after the button is pressed. • Keep the hood and front air inlets free of ice, Pressing the button while the defogger is running snow, or any other obstruction, such as can also turn off the defogger.
  • Page 242: Warning Lights, Gages, And Indicators

    Warning Lights, Gages, and Gages can indicate when there may be or is a problem with one of your vehicle’s functions. Often Indicators gages and warning lights work together to let you know when there is a problem with your This part describes the warning lights and gages on vehicle.
  • Page 243: Instrument Panel Cluster

    Instrument Panel Cluster United States Heavy Duty Automatic Transmission version shown. Canada, Light Duty Automatic and Manual Transmission Clusters similar. Your instrument cluster is designed to let you know at a glance how your vehicle is running. You will know how fast you are going, about how much fuel you have and many other things you will need to know ®...
  • Page 244: Speedometer And Odometer

    Speedometer and Odometer Press the reset button, located on the instrument panel cluster next to the voltmeter, to toggle Your speedometer lets you see your speed in between the trip odometer and the regular both miles per hour (mph) and kilometers per odometer.
  • Page 245: Safety Belt Reminder Light

    Safety Belt Reminder Light Airbag Readiness Light When the key is turned to RUN or START, a There is an airbag readiness light on the instrument chime will sound for several seconds to remind panel cluster, which shows the airbag symbol. The people to buckle their safety belts.
  • Page 246: Airbag Off Light

    Airbag Off Light CAUTION: If your vehicle has an airbag off switch, it also has an airbag off light. See Airbag Off Switch on page 96 for more on this, including important If the right front passenger’s airbag is safety information. turned off for a person who is not in a risk group identified by the national government, that person will not have the...
  • Page 247 CAUTION: (Continued) CAUTION: passenger’s position (for example, do not If the airbag readiness light ever comes secure a rear-facing child restraint in your on when you have turned off the airbag, it vehicle) until you have your vehicle means that something may be wrong with serviced.
  • Page 248: Passenger Airbag Status Indicator

    Passenger Airbag Status Indicator will light either ON or OFF, or either the on or off symbol to let you know the status of the right If your vehicle has the passenger sensing system, front passenger’s frontal airbag. your rearview mirror will have a passenger A label on your sun visor says, “Never put a airbag status indicator.
  • Page 249 If the word OFF or the off symbol is lit on the CAUTION: (Continued) passenger airbag status indicator, it means that the passenger sensing system has turned off the right front passenger’s airbag. See Passenger because the back of the rear-facing child Sensing System on page 99 or Airbag Off restraint would be very close to the Switch on page 96 for more on this, including...
  • Page 250: Battery Warning Light

    Battery Warning Light If, after several seconds, all status indicator lights remain on, or if there are no lights at all, there may be a problem with the lights or the passenger If this light comes on sensing system. See your dealer for service. when the engine is running, there could be a problem with the...
  • Page 251: Voltmeter Gage

    Voltmeter Gage provide full power at engine idle. As engine speeds are increased, this condition should correct itself as higher engine speeds allow the charging When the engine is not system to create maximum power. running, but the ignition is in RUN, this gage You can only drive for a short time with the shows your battery’s reading in either warning zone.
  • Page 252: Brake System Warning Light

    Brake System Warning Light This light should come on briefly when you turn the ignition key to RUN. If it does not come With the ignition on, the brake system warning on then, have it fixed so it will be ready to warn light will flash when you set the parking brake.
  • Page 253: Anti-Lock Brake System Warning Light

    Anti-Lock Brake System The ABS warning light should come on briefly when you turn the ignition key to RUN. If the light Warning Light does not come on then, have it fixed so it will be ready to warn you if there is a problem. With the Anti-Lock Brake System (ABS), this light Traction Off Light...
  • Page 254: Engine Coolant Temperature Gage

    Engine Coolant Temperature Gage Transmission Temperature Gage United States Canada United States Canada This gage shows the engine coolant temperature. Your vehicle may have a transmission temperature gage. It also provides an indicator of how hard your vehicle is working. During a majority of the When your ignition is on, the gage shows the operation, the gage will read 210°F (100°C) or less.
  • Page 255 At approximately 265°F (130°C), the Driver Notice: If you drive your vehicle with the Information Center (DIC) will display a transmission temperature gage above normal TRANSMISSION HOT message and the operating range, you can damage the transmission will enter a transmission protection transmission.
  • Page 256: Malfunction Indicator Lamp

    Malfunction Indicator Lamp Notice: If you keep driving your vehicle with this light on, after awhile, the emission controls Check Engine Light might not work as well, your vehicle’s fuel economy might not be as good, and the engine might not run as smoothly. This could lead Your vehicle has a to costly repairs that might not be covered by computer which...
  • Page 257 This light should come on, as a check to show If the light stops flashing and remains on steady, you it is working, when the ignition is on and the see “If the Light Is On Steady” following. engine is not running. If the light does not If the light continues to flash, when it is safe to do come on, have it repaired.
  • Page 258 Emissions Inspection and Did you just drive through a deep puddle of water? Maintenance Programs If so, your electrical system may be wet. The condition will usually be corrected when the Some state/provincial and local governments have electrical system dries out. A few driving trips or may begin programs to inspect the emission should turn the light off.
  • Page 259: Oil Pressure Gage

    Oil Pressure Gage A reading in the low pressure zone may be caused by a dangerously low oil level or some other problem causing low oil pressure. Check your oil as soon as possible. See “OIL PRESSURE LOW” under DIC Warnings and Messages on page 267 and Engine Oil (Gasoline Engine) on page 482.
  • Page 260: Security Light

    Security Light Highbeam On Light This light flashes when This light comes on the vehicle security when the high-beam system is activated. headlamps are in use. See Headlamp High/Low-Beam Changer on Cruise Control Light page 215 for more information. Four-Wheel-Drive Light This light comes on whenever you set the cruise control.
  • Page 261: Tow/Haul Mode Light

    Tow/Haul Mode Light Fuel Gage This light comes on when the Tow/Haul mode has been activated. For more information, see Tow/Haul Mode on page 145. United States Canada Cargo Lamp Light When the ignition is on, the fuel gage tells you about how much fuel you have left in your tank.
  • Page 262: Low Fuel Warning Light

    Driver Information Center (DIC) Here are some situations you may experience with your fuel gage. None of these indicate a problem The Driver Information Center (DIC) display is with the fuel gage. located on the instrument panel cluster, below the •...
  • Page 263: Dic Operation And Displays

    ® If your vehicle has an Allison Transmission (Fuel Information): Press this button to the shift lever is in the MANUAL MODE (M) display the current range, fuel used, average fuel position, the DIC will display the current gear economy, and engine oil life. range.
  • Page 264 Trip Information Button You can also reset TRIP A or TRIP B while they are displayed by pressing the reset stem on (Trip Information): Press the trip the cluster. If you press and hold the reset stem or the select button for four seconds, the display information button to scroll through the will show the distance traveled since the last ODOMETER, TRIP A, TRIP B, TIMER, ENGINE...
  • Page 265 Engine Hours: Press the trip information button Fuel Range: Press the fuel information button until ENGINE HOURS appears on the display. until RANGE appears on the display. This This mode shows the total number of hours mode shows the remaining distance you can drive the engine has run.
  • Page 266 Customization Button Press and hold the select button for one second while AVG ECON is displayed to reset the average fuel economy. Average fuel economy will then (Customization): Press the customization be calculated starting from that point. If the button to access the VEHICLE SETTINGS menu average fuel economy is not reset, it will be and customize the settings to your vehicle.
  • Page 267: Dic Warnings And Messages

    DIC Warnings and Messages The following are the possible messages that can be displayed and some information about them. Warning messages are displayed on the Driver ® If your vehicle has the DURAMAX Diesel engine, Information Center (DIC) to notify the driver ®...
  • Page 268 BUCKLE PASSENGER BUCKLE SEATBELT If your vehicle has the passenger sensing system, If your vehicle has the passenger sensing system, this message reminds you to buckle the this message reminds you to buckle the driver’s passenger’s safety belt. See Passenger Sensing safety belt.
  • Page 269 CHANGE ENGINE OIL CHECK OIL LEVEL This message is displayed when the engine oil If your vehicle has an oil level sensor, and the oil needs to be changed. level in the vehicle is low, this message will appear on the DIC. Check the oil level and correct When you change the engine oil, be sure to reset it as necessary.
  • Page 270 DRIVER DOOR AJAR ENGINE OVERHEATED If the driver’s door is not fully closed, this message Notice: If you drive your vehicle while the will appear on the display and you will hear a chime. engine is overheating, severe engine damage Stop and turn off the vehicle, check the door for may occur.
  • Page 271 FUEL LEVEL LOW page 113. Pressing any of the four DIC buttons will acknowledge the message and clear it from the If the fuel level is low, this message will appear on DIC display. If your vehicle does not have the the DIC and you will hear a chime.
  • Page 272 LOW COOLANT LEVEL OIL PRESSURE LOW Notice: Engine damage from running your Notice: If you drive your vehicle while the engine without coolant is not covered by your engine oil pressure is low, severe engine warranty. See “Overheated Engine Protection damage may occur.
  • Page 273 PASSENGER DOOR AJAR REDUCED ENGINE POWER If the passenger’s door is not fully closed, this This message is displayed when the cooling message will appear on the display and you will system temperature gets too hot and the engine hear a chime. Stop and turn off the vehicle, check further enters the engine coolant protection mode.
  • Page 274 RIGHT REAR DOOR AJAR (Crew Cab) SERVICE AIRBAG If the passenger’s side rear door is not fully If there is a problem with the airbag system, this closed, this message will appear on the display message will be displayed on the DIC. Have and you will hear a chime.
  • Page 275 SERVICE BRAKE BOOSTER If your vehicle has vacuum assist power brakes, this message will be displayed on the DIC when there is a problem with the Supplemental Brake Assist system. If the message is displayed CAUTION: immediately after starting the vehicle or the message appears while driving, the Supplemental Your brake system may not be working Brake Assist system needs service.
  • Page 276 SERVICE CHARGING SYSTEM TIGHTEN FUEL CAP On some vehicles, if there is a problem with the If the vehicle’s fuel cap is not tightened properly, battery charging system, this message will appear this message may appear along with the check on the DIC.
  • Page 277 TRANSMISSION HOT If the vehicle has the Tow/Haul mode, use this feature if the transmission is operating at higher Notice: If you drive your vehicle while the temperatures and/or the following situations transmission fluid is overheating and the exist, which can cause the transmission to operate transmission temperature warning is displayed at higher temperatures: on the instrument panel cluster and/or DIC,...
  • Page 278 TRANS (Transmission) HOT TRANS (Transmission) IN WARM UP ® IDLE ENGINE (Allison Transmission Only) When temperatures are very cold, the transmission Notice: If you drive your vehicle while the will prevent certain operations such as shifts to transmission fluid is overheating and the some ranges and engaging the torque converter transmission temperature warning is displayed clutch to protect against damage.
  • Page 279: Dic Vehicle Customization

    DIC Vehicle Customization Lock Doors (Automatic Transmission only) If you have an automatic transmission vehicle, Your vehicle may have customization capabilities press the customization button until LOCK DOORS that allow you to program some features to appears in the display. To select your preference one setting based on your preference.
  • Page 280 Unlock Doors (Automatic UNLOCK DOORS: MANUALLY: The doors will not be unlocked automatically. Transmission only) Choose one of the available options and press the If you have an automatic transmission vehicle, customization button while it is displayed on the press the customization button until UNLOCK DIC to select it and move on to the next feature.
  • Page 281 Lock Feedback Press the customization button until DOOR LOCK DELAY appears in the display. To select your Press the customization button until LOCK preference for delayed locking, press the select FEEDBACK appears in the display. To select your button while DOOR LOCK DELAY is displayed on preference for the feedback you receive when the DIC.
  • Page 282 Unlock Feedback Headlamp Delay Press the customization button until UNLOCK Press the customization button until HEADLAMP FEEDBACK appears in the display. To select your DELAY appears in the display. To select your preference for the feedback you will receive preference for how long the headlamps will stay when unlocking the vehicle with the Remote on when you turn off the vehicle, press the Keyless Entry (RKE) transmitter, press the select...
  • Page 283 Perimeter Lights Easy Exit Seat Press the customization button until PERIMETER Press the customization button until EASY EXIT LIGHTS appears in the display. To select your SEAT appears in the display. To select your preference for perimeter lighting, press the select preference for seat position exit, press the select button while PERIMETER LIGHTS is displayed button while EASY EXIT SEAT is displayed...
  • Page 284 Curb View Alarm Warning Press the customization button until CURB VIEW Press the customization button until ALARM appears in the display. To select your preference WARNING appears in the display. To select your for curb view, press the select button while CURB preference for alarm warning, press the select VIEW is displayed on the DIC.
  • Page 285 Language Display Units To select your preference for display language, Press the customization button until DISPLAY press the select button while LANGUAGE is UNITS appears in the display. To select English or displayed on the DIC. Pressing the select button metric, press the select button while DISPLAY will scroll through the following languages: UNITS is displayed on the DIC.
  • Page 286: Audio System(S)

    Audio System(s) CAUTION: Determine which radio your vehicle has and then read the pages following to familiarize yourself This system provides you with a far greater with its features. access to audio stations and song listings. Driving without distraction is a necessity for a Giving extended attention to entertainment safer driving experience.
  • Page 287: Setting The Time For Radios Without Radio Data Systems (Rds)

    While your vehicle is parked: Notice: The chime signals related to safety belts, parking brake, and other functions • Familiarize yourself with all of its controls. of your vehicle operate through the • Familiarize yourself with its operation. radio/entertainment system. If that equipment •...
  • Page 288: Setting The Time For Radios With Radio Data Systems (Rds)

    Setting the Time for Radios with AM-FM Radio Radio Data Systems (RDS) The radio could have a button marked with an H or HR to represent hours and an M or MN to represent minutes. Press and hold the hour button until the correct hour displays.
  • Page 289 Finding a Station Setting Preset Stations Up to 18 stations (six FM1, six FM2, and six AM) AM FM: Press this button to switch between FM1, can be programmed on the six numbered FM2, or AM. The selection displays. pushbuttons, by performing the following steps: TUNE: Turn this knob to select radio stations.
  • Page 290 To adjust both tone controls and both speaker To adjust both tone controls and both speaker controls to the middle position, first exit out of audio controls to the middle position, first exit out of audio mode by pressing another button, causing the radio mode by pressing another button, causing the radio to perform that function or wait five seconds for the to perform that function or wait five seconds for the...
  • Page 291: Radio With Cd

    Radio with CD With RDS, the radio can do the following: • Seek to stations broadcasting the selected type of programming • Receive announcements concerning local and national emergencies • Display messages from radio stations This system relies upon receiving specific information from these stations and only works when the information is available.
  • Page 292 XM™ Satellite Radio Service For RDS, press the INFO knob to change what appears on the display while using RDS. The XM™ is a satellite radio service that is based in display options are station name, RDS station the 48 contiguous United States and Canada. frequency, PTY, and the name of the program (if XM™...
  • Page 293: Finding A Station

    Finding a Station To scan preset stations, press and hold either the SCAN or the TYPE arrows for more than BAND: Press this button to switch between FM1, four seconds. PSCN appears on the display and FM2, AM, or XM1 or XM2 (if equipped). The you will hear a double beep.
  • Page 294 To store an equalization setting to a preset station AUTO EQ (Automatic Equalization): Press this perform the following: button to select customized equalization settings designed for country/western, jazz, talk, pop, rock, 1. Tune to the preset station. and classical. Selecting CUSTOM or changing 2.
  • Page 295 To adjust the balance or fade to the middle 4. To go to another station within that PTY and position, while it is displayed, push the AUDIO the PTY is displayed, press either the TYPE knob, then push it again and hold it until the radio or the SEEK arrows once.
  • Page 296 BAND (Alternate Frequency): Alternate 3. Turn the TYPE knob or press and release the frequency allows the radio to switch to a stronger TYPE button to select a PTY. station with the same program type. To turn 4. Press and hold one of the six numbered alternate frequency on, press and hold BAND for pushbuttons until you hear a beep.
  • Page 297 Radio Messages If the ignition or radio is turned off with the CD in the player, it stays in the player. When the CAL ERR (Calibration Error): The audio system ignition or radio is turned on, the CD starts playing has been calibrated for your vehicle from the where it stopped, if it was the last selected factory.
  • Page 298 Do not add any label to a CD, it could get caught 2 NEXT: Press this pushbutton to go to the next in the CD player. If a CD is recorded on a track. TRACK and the track number appears personal computer and a description label is on the display.
  • Page 299 6 RDM (Random): Press this pushbutton to hear INFO (Information): Press this knob to see how the tracks in random, rather than sequential, long the current track has been playing. ET order. RDM ON appears on the display. RDM T and the elapsed time appears on the display.
  • Page 300: Radio With Cassette And Cd

    CD Messages Radio with Cassette and CD If the CD comes out, it could be for one of the following reasons: • It is very hot. When the temperature returns to normal, the CD should play. • You are driving on a very rough road. When the road becomes smoother, the CD should play.
  • Page 301 Radio Data System (RDS) XM™ Satellite Radio Service The audio system has a Radio Data System XM™ is a satellite radio service that is based in (RDS). RDS features are available for use only on the 48 contiguous United States and Canada. FM stations that broadcast RDS information.
  • Page 302 Finding a Station For RDS, press the INFO knob to change what appears on the display while using RDS. The BAND: Press this button to switch between FM1, display options are station name, RDS station FM2, AM, or XM1 or XM2 (if equipped). The frequency, PTY, and the name of the program (if display shows the selection.
  • Page 303 To scan preset stations, press and hold either To store an equalization setting to a preset station the SCAN or the TYPE arrows for more than perform the following: four seconds. PSCN appears on the display and 1. Tune to the preset station. you will hear a double beep.
  • Page 304 AUTO EQ (Automatic Equalization): Press this To adjust the balance or fade to the middle position button to select customized equalization settings while it is displayed, push the AUDIO knob, then designed for country/western, jazz, talk, pop, rock, push it again and hold it until the radio produces and classical.
  • Page 305 3. Once the desired PTY is displayed, press and 3. Once the desired PTY is displayed, press and release either the TYPE or the SEEK arrows hold either the TYPE or the SCAN arrows for to select and to take you to the PTY’s first two seconds, and the radio begins scanning station.
  • Page 306 Setting Preset PTYs (RDS Only) If the entire message is not displayed, parts of the message appears every three seconds. To These buttons have factory PTY presets. Up to scroll through the message, press and release the 12 PTYs (six FM1 and six FM2), can be INFO button.
  • Page 307 Radio Messages for XM™ Only Cassette tape adapter kits for portable CD players works in the cassette tape player. See “CD See XM Radio Messages on page 327 later in this Adapter Kits” later for more information. section for further detail. The tape bias is set automatically when a metal or Playing a Cassette Tape chrome tape is inserted.
  • Page 308 2 NEXT: The tape must have at least continues moving forward or backward through the three seconds of silence between each selection for tape. SEEK and a positive or negative number next to work. Press this pushbutton to go to the next appears on the display.
  • Page 309 Cassette Tape Messages If the cassette tape is not playing correctly, for any other reason, try a known good cassette. CHK TAPE (Check Tape): If this message If any error occurs repeatedly or if an error cannot appears on the display, the tape does not play be corrected, contact your dealer.
  • Page 310 Playing a CD and ejecting. If these problems occur, check the bottom surface of the CD. If the surface of the CD Insert a CD part way into the slot, label side up. The is damaged, such as cracked, broken, or player pulls it in and the CD should begin playing.
  • Page 311 1 PREV (Previous): Press this pushbutton to go Press and hold it for more than two seconds to to the beginning of the current track if more advance at 17 times the normal playing speed. than eight seconds have played. TRACK and the Release this pushbutton to play the passage.
  • Page 312 CD Messages INFO (Information): Press this knob to see how long the current track has been playing. ET If the CD comes out, it could be for one of the and the elapsed time appears on the display. To following reasons: change the default on the display, track or elapsed •...
  • Page 313: Radio With Six-Disc Cd

    Listening to a DVD Radio with Six-Disc CD If your vehicle has the Rear Seat Entertainment (RSE) system and a DVD is playing, the DVD symbol appears on the radio display indicating that the DVD is available and can be listened to through your vehicle’s speakers.
  • Page 314 With RDS, the radio can do the following: channels including music, news, sports, talk, traffic/weather (U.S. subscribers), and children’s • Seek to stations broadcasting the selected programming. XM™ provides digital quality type of programming audio and text information that includes song title •...
  • Page 315 Finding a Station For XM™ (if equipped), press the INFO knob while in XM™ mode to retrieve four different categories of BAND: Press this button to switch between FM1, information related to the current song or channel: FM2, AM, or XM1 or XM2 (if equipped). The Artist, Song Title, Category or PTY, Channel display shows the selection.
  • Page 316 To scan preset stations, press and hold either To store an equalization setting to a preset station the SCAN or the TYPE arrows for more than perform the following: four seconds. PSC appears on the display and you 1. Tune to the preset station. will hear a double beep.
  • Page 317 AUTO EQ (Automatic Equalization): Press this To adjust all tone and speaker controls to the button to select customized equalization settings middle position, push and hold the AUDIO knob designed for country/western, jazz, talk, pop, rock, when no tone or speaker controls are displayed. and classical.
  • Page 318 Setting Preset PTYs (RDS Only) SCAN: Scan the stations within a PTY by performing the following: These pushbuttons have factory PTY presets. Up 1. Press the TYPE button to activate program to 12 PTYs (six FM1 and six FM2), can be type select mode.
  • Page 319 RDS Messages LOCKED: This message is displayed when the ® THEFTLOCK system has locked up. Take INFO (Information): If the current station has a the vehicle to your dealer for service. message, INFO appears on the display. Press this If any error occurs repeatedly, or if an error cannot button to see the message.
  • Page 320 The CD player can play the smaller 3 inch (8 cm) Notice: If a label is added to a CD, or more single CDs with an adapter ring. Full-size CDs than one CD is inserted into the slot at a time, and the smaller CDs are loaded in the same or an attempt is made to play scratched or manner.
  • Page 321 Playing a Specific Loaded CD To insert multiple CDs, do the following: 1. Turn the ignition on. For every CD loaded, a number appears on the display. To play a specific CD, first press the 2. Press and hold the LOAD button for CD AUX button, then press the numbered two seconds.
  • Page 322 If the CD is not removed, after 25 seconds, the To use repeat, do the following: CD automatically pulls back into the player. If CD • To repeat the track you are listening to, press is pushed back into the player, before the and release the RPT button.
  • Page 323 AUTO EQ (Automatic Equalization): Press To scan all loaded CDs, press and hold either AUTO EQ to select the equalization setting while SCAN arrow for more than four seconds until ALL playing a CD. The equalization is stored CD SCAN appears on the display and you hear whenever a CD is played.
  • Page 324 Using Song List Mode S-LIST FULL appears on the display if you try to save more than 20 selections. The six-disc CD changer has a feature called To play the song list, press the SONG LIST song list. This feature is capable of saving 20 track button.
  • Page 325 CD Messages After a track has been deleted, the remaining tracks are moved up the list. When another track CHECK CD: If this message appears on the is added to the song list, the track is added to display and/or the CD comes out, it could be for the end of the list.
  • Page 326 Listening to a DVD To stop listening to the DVD, press the CD AUX button, if a CD is loaded, or press the BAND If your vehicle has the Rear Seat Entertainment button to select a different source. (RSE) system and a DVD is playing, the DVD When the RSE system is turned off, the DVD symbol appears on the radio display indicating that symbol goes off of the radio display and RSE OFF...
  • Page 327: Xm Radio Messages

    XM Radio Messages Radio Display Message Condition Action Required XL (Explicit XL on the radio display, These channels, or any others, can be blocked at a Language Channels) after the channel name, customer’s request, by calling 1-800-852-XMXM (9696). indicates content with explicit language.
  • Page 328 Radio Display Message Condition Action Required No Info Song/Program Title No song title information is available at this time on this not available channel. The system is working properly. No Info Category Name No category information is available at this time on this not available channel.
  • Page 329: Rear Seat Entertainment System

    Rear Seat Entertainment System Before You Drive The RSE system is for rear seat passengers only. Your vehicle may have a DVD Rear Seat The driver cannot safely view the video screen Entertainment (RSE) system. The RSE system while driving and should not try to do so. includes a DVD player, a video display screen, two sets of wireless headphones, and a remote Headphones...
  • Page 330 Battery Replacement When using the wired headphones, if the front seat passengers play a CD in the Radio with To change the batteries, do the following: Six-Disc CD (if equipped) or use XM™ Satellite 1. Loosen the screw on the battery compartment Radio Service (if equipped), you will hear the audio door located on the left side of the headphone for these sources, instead of the DVD or CD...
  • Page 331 Audio Output The yellow connector inputs video and the red and white connectors input right and left audio. Refer to Audio from the DVD player or auxiliary inputs may the manufacturer’s instructions for proper be heard through the following possible sources: connection of the auxiliary device.
  • Page 332 DVD Player The RSE system is capable of outputting audio to the wired headphone jacks on the rear seat The DVD player is located in the overhead audio system (if equipped). The RSE system may console. The DVD player can be controlled by the be selected as an audio source on the rear buttons on the DVD player and/or by the buttons seat audio system if the RSE system power is on.
  • Page 333 When using the wired headphones, not included, if (Eject): Press this button to eject a DVD the front seat passengers play a CD in the or CD. Radio with Six-Disc CD (if equipped) or use XM™ SRCE (Source): Press this button to switch Satellite Radio Service (if equipped), you will between the DVD player and an auxiliary source.
  • Page 334 Playing a Disc (Set-up Menu): Press this button to adjust the color, tint, brightness, contrast, display mode, To play a disc, gently insert the disc with the label and dynamic range compression. The dynamic side up into the loading slot. The DVD player range compression feature can be used to reduce will continue loading the disc and the player will loud audio and increase low audio produced by...
  • Page 335 Stopping and Resuming Playback Remote Control To stop playing a disc, press and release the stop To use the remote control, aim it at the transmitter button on the DVD player faceplate or the window below the video screen and press the remote control.
  • Page 336 Remote Control Buttons (Set-up Menu): Press this button to adjust the color, tint, brightness, contrast, display mode, and dynamic range compression. The dynamic range compression feature can be used to reduce loud audio and increase low audio produced by some DVDs. (Audio): Press this button to display a menu that will only appear when a DVD is being played.
  • Page 337 (Previous Track/Chapter): Press this button (Main DVD Menu): Press this button to access to return to the start of the current track or chapter. the DVD menu. The DVD menu is different on every Press this button again to return to the previous DVD.
  • Page 338 Battery Replacement (Fast Forward): Press this button to fast forward the DVD or CD. To stop fast forwarding, To change the batteries, do the following: press this button again. This button may not 1. Remove the battery compartment door located work when the DVD is playing the copyright on the bottom of the remote control.
  • Page 339 Problem Recommended Action Problem Recommended Action No power. The ignition might not be In auxiliary mode, the Check the auxiliary input in on or accessory. picture moves or scrolls. connections at both The parental control devices. button might have been Change the Video Format turned on.
  • Page 340 Problem Recommended Action Problem Recommended Action After stopping the player, I If the stop button was Sometimes the wireless Check for obstructions, push Play but sometimes pressed one time, the headphone audio cuts out low batteries, reception the DVD starts where I DVD player will resume or buzzes.
  • Page 341 DVD Messages DVD Distortion The following errors may be displayed on the There may be an experience with audio distortion video screen: in the wireless headphones when operating cellular phones, scanners, CB radios, Global Disc Format Error: This message will be Positioning Systems (GPS)*, two-way radios, displayed if a disc is inserted upside down, if the mobile fax, or walkie talkies.
  • Page 342: Rear Seat Audio (Rsa)

    Rear Seat Audio (RSA) This feature allows rear seat passengers to listen to any of the sources: radio, cassette tapes, CDs, or DVDs. However, the rear seat passengers can only control the sources that the front seat passengers are not listening to. For example, rear seat passengers may listen to and control cassette tapes, CDs, or DVDs through the headphones while the driver listens to the radio...
  • Page 343: Theft-Deterrent Feature

    SRC (Source): Press this button to select a When a CD is playing, press this button to go to source: radio, cassette tapes, CDs, or DVDs. the beginning of the CD. This function is inactive if the front seat passengers are listening to a CD. SEEK : When listening to FM1, FM2, or AM, When a CD is playing in the six-disc CD changer,...
  • Page 344: Audio Steering Wheel Controls

    Audio Steering Wheel Controls PROG (Program): Press this button to play a station you have programmed on the radio preset pushbuttons. The radio will only seek preset stations with a strong signal that are in the selected band. When a cassette tape is playing, press this button to play the other side of the tape.
  • Page 345: Radio Reception

    Radio Reception FM Stereo FM stereo gives the best sound, but FM signals Frequency interference and static during normal reach about 10 to 40 miles (16 to 65 km). Tall radio reception can occur if items such as buildings or hills can interfere with FM signals, cellphone chargers, vehicle convenience causing the sound to fade in and out.
  • Page 346: Care Of The Cassette Tape Player

    Care of the Cassette Tape Player For best results, use a scrubbing action, non-abrasive cleaning cassette with pads which A tape player that is not cleaned regularly scrub the tape head as the hubs of the cleaner can cause reduced sound quality, ruined cassette turn.
  • Page 347: Care Of Your Cds And Dvds

    Care of Your CDs and DVDs A non-scrubbing action, wet-type cleaner which uses a cassette with a fabric belt to clean the tape Handle CDs carefully. Store them in their original head can be used. This type of cleaning cassette cases or other protective cases and away from does not eject on its own.
  • Page 348: Care Of The Cd And Dvd Player

    Care of the CD and DVD Player A vehicle with a sunroof might not get the best performance from the XM™ system if the sunroof The use of CD lens cleaners for CDs is not is open. advised, due to the risk of contaminating the lens Loading items onto the roof of your vehicle can of the CD optics with lubricants internal to the interfere with the performance of the XM™...
  • Page 349: Driving Your Vehicle

    Section 4 Driving Your Vehicle Your Driving, the Road, and Your Before Leaving on a Long Trip ....392 Highway Hypnosis ........393 Vehicle ............. 350 Hill and Mountain Roads ......394 Defensive Driving ........350 Winter Driving ........... 396 Drunken Driving ........
  • Page 350: Your Driving, The Road, And Your Vehicle

    Your Driving, the Road, and CAUTION: Your Vehicle Defensive driving really means “Be ready Defensive Driving for anything.” On city streets, rural roads, The best advice anyone can give about driving is: or expressways, it means “Always expect Drive defensively. the unexpected.”...
  • Page 351: Drunken Driving

    Drunken Driving Many adults — by some estimates, nearly half the adult population — choose never to drink Death and injury associated with drinking and alcohol, so they never drive after drinking. For driving is a national tragedy. It is the number one persons under 21, it is against the law in contributor to the highway death toll, claiming every U.S.
  • Page 352 According to the American Medical Association, a It is the amount of alcohol that counts. For 180 lb (82 kg) person who drinks three 12 ounce example, if the same person drank three double (355 ml) bottles of beer in an hour will end up with martinis (3 ounces or 90 ml of liquor each) a BAC of about 0.06 percent.
  • Page 353 But the ability to drive is affected well below a BAC There is something else about drinking and driving of 0.10 percent. Research shows that the driving that many people do not know. Medical research skills of many people are impaired at a BAC shows that alcohol in a person’s system can make approaching 0.05 percent, and that the effects are crash injuries worse, especially injuries to the brain,...
  • Page 354: Control Of A Vehicle

    Control of a Vehicle Braking You have three systems that make your vehicle See Brake System Warning Light on page 252. go where you want it to go. They are the brakes, Braking action involves perception time and the steering, and the accelerator. All three reaction time.
  • Page 355: Anti-Lock Brake System (Abs)

    Anti-Lock Brake System (ABS) Avoid needless heavy braking. Some people drive in spurts — heavy acceleration followed by heavy Your vehicle has the Anti-Lock Brake System braking — rather than keeping pace with traffic. (ABS), an advanced electronic braking system that This is a mistake.
  • Page 356 ABS can change the brake pressure faster than any driver could. The computer is programmed to make the most of available tire and road conditions. This can help you steer around the obstacle while braking hard. Let us say the road is wet and you are driving safely.
  • Page 357: Braking In Emergencies

    Traction Assist System (TAS) Remember: ABS does not change the time you need to get your foot up to the brake pedal Your vehicle may have a Traction Assist System or always decrease stopping distance. If you get (TAS) that limits wheel spin. This is especially too close to the vehicle in front of you, you will not useful in slippery road conditions.
  • Page 358 • When road conditions allow you to safely use it A Traction Assist System, Anti-Lock Brake again, you may re-engage the cruise control. See System or engine-related problem has been Cruise Control on page 217. detected and the vehicle needs service. •...
  • Page 359: Manual Selectable Ride

    Manual Selectable Ride To turn the system on or off, press the TAS The main function of this system is to provide on/off button located on superior ride comfort while trailering or fully loaded, the instrument panel. as well as for unloaded driving. This system also helps to provide: •...
  • Page 360: Locking Rear Axle

    It is recommended to use this system as follows: FIRM (Loaded): Press the button to activate this setting, the indicator light will be lit. Use this • For superior ride comfort in an unloaded vehicle setting to minimize trailer inputs to the vehicle or the button should be out.
  • Page 361: Steering

    Steering Suppose you are steering through a sharp curve. Then you suddenly accelerate. Both control Power Steering systems — steering and acceleration — have to do their work where the tires meet the road. If you lose power steering assist because the Adding the sudden acceleration can demand too engine stops or the system is not functioning, you much of those places.
  • Page 362 Adding non-GM accessories can affect your vehicle’s performance. See Accessories and Modifications on page 464. Steering in Emergencies There are times when steering can be more effective than braking. For example, you come over a hill and find a truck stopped in your lane, or a car suddenly pulls out from nowhere, or a child darts out from between parked cars and stops right in front of you.
  • Page 363: Off-Road Recovery

    Off-Road Recovery Passing You may find that your right wheels have dropped The driver of a vehicle about to pass another on a off the edge of a road onto the shoulder while two-lane highway waits for just the right moment, you are driving.
  • Page 364 • start that more than makes up for the distance Watch for traffic signs, pavement markings, you would lose by dropping back. And if and lines. If you can see a sign up ahead something happens to cause you to cancel that might indicate a turn or an intersection, your pass, you need only slow down and drop delay your pass.
  • Page 365: Loss Of Control

    • Skidding Try not to pass more than one vehicle at a time on two-lane roads. Reconsider before In a skid, a driver can lose control of the vehicle. passing the next vehicle. Defensive drivers avoid most skids by taking •...
  • Page 366: Off-Road Driving

    Off-Road Driving If your vehicle starts to slide, ease your foot off the accelerator pedal and quickly steer the This off-road guide is for vehicles that have way you want the vehicle to go. If you start four-wheel drive. Also, see Braking on page 354. If steering quickly enough, your vehicle may your vehicle does not have four-wheel drive or straighten out.
  • Page 367 If you think you will need some more ground The following steps must be performed on each of clearance at the front of your vehicle, you the push-pins to remove the air dam: can remove the front bumper lower air dam. 1.
  • Page 368 2. While continuing to When you are back on roads, though, be sure to pull downward on replace the air dam. the push-pin, Notice: Operating your vehicle for extended squeeze and turn periods without the front bumper lower air dam the expandable end installed can cause improper air flow to the of the push-pin...
  • Page 369 Before You Go Off-Roading To reinstall the lower air dam, do the following: There are some things to do before you go out. 1. Line up each For example, be sure to have all necessary push-pin with its maintenance and service work done. Check to intended retainer make sure all underbody shields, if the vehicle has and push the washer...
  • Page 370 Loading Your Vehicle for Off-Road There are some important things to remember about how to load your vehicle. Driving • The heaviest things should be on the load floor and forward of the rear axle. Put CAUTION: heavier items as far forward as you can. •...
  • Page 371 Environmental Concerns Traveling to Remote Areas Off-road driving can provide wholesome and It makes sense to plan your trip, especially when satisfying recreation. However, it also raises going to a remote area. Know the terrain and plan environmental concerns. We recognize these your route.
  • Page 372 Getting Familiar with Off-Road Driving Here are some things to keep in mind. At higher speeds: It is a good idea to practice in an area that is safe • You approach things faster and you have less and close to home before you go into the time to scan the terrain for obstacles.
  • Page 373 Scanning the Terrain • Does the travel take you uphill or downhill? There is more discussion of these subjects Off-road driving can take you over many different later. kinds of terrain. You need to be familiar with • Will you have to stop suddenly or change the terrain and its many different features.
  • Page 374 Drinking and driving can be very dangerous on any road. And this is certainly true for off-road driving. At CAUTION: the very time you need special alertness and driving skills, your reflexes, perceptions, and judgment can Many hills are simply too steep for any be affected by even a small amount of alcohol.
  • Page 375: Approaching A Hill

    Approaching a Hill • Is there a straight path up or down the hill so you will not have to make turning maneuvers? When you approach a hill, you need to decide if it is • Are there obstructions on the hill that can one of those hills that is just too steep to climb, block your path, such as boulders, trees, logs, descend, or cross.
  • Page 376 Driving Uphill • Try to drive straight up the hill if at all possible. If the path twists and turns, you might want to Once you decide you can safely drive up the hill, find another route. you need to take some special steps. •...
  • Page 377 wheels are straight and maneuver as you back What should I do if my vehicle stalls, down. It is best that you back down the hill with or is about to stall, and I cannot make it up the wheels straight rather than in the left or right the hill? direction.
  • Page 378 Suppose, after stalling, I try to back down the hill and decide I just cannot do it. What CAUTION: should I do? Set the parking brake, put the transmission in Shifting the transfer case to NEUTRAL can PARK (P), or the manual transmission in cause your vehicle to roll even if the FIRST (1), and turn off the engine.
  • Page 379 Driving Downhill CAUTION: When off-roading takes you downhill, you will want to consider a number of things: • Heavy braking when going down a hill can How steep is the downhill? Will I be able to cause your brakes to overheat and fade. maintain vehicle control? This could cause loss of control and a •...
  • Page 380 Are there some things I should not do Am I likely to stall when going downhill? when driving down a hill? It is much more likely to happen going Yes! These are important because if you uphill. But if it happens going downhill, here is ignore them you could lose control and what to do.
  • Page 381: Driving Across An Incline

    Driving Across an Incline But when you drive across an incline, the much more narrow track width — the distance Sooner or later, an off-road trail will probably go between the left and right wheels — may not across the incline of a hill. If this happens, prevent the vehicle from tilting and rolling over.
  • Page 382 What if I am driving across an incline that is not too steep, but I hit some loose gravel and start to slide downhill. What should I do? If you feel your vehicle starting to slide sideways, turn downhill. This should help straighten out the vehicle and prevent the side slipping.
  • Page 383 Driving in Mud, Sand, Snow, or Ice Hard packed snow and ice offer the worst tire traction. On these surfaces, it is very easy to lose When you drive in mud, snow, or sand, your control. On wet ice, for example, the traction is wheels will not get good traction.
  • Page 384 Driving in Water Find out how deep the water is before you drive through it. If it is deep enough to cover the wheel hubs, axles, or exhaust pipe, do not try it — you probably will not get through. Also, water that deep CAUTION: can damage the axle and other vehicle parts.
  • Page 385: Driving At Night

    After Off-Road Driving • Adjust the inside rearview mirror to reduce the glare from headlamps behind you. Remove any brush or debris that has collected on • Since you cannot see as well, you may need the underbody, chassis, or under the hood. to slow down and keep more space between These accumulations can be a fire hazard.
  • Page 386: Driving In Rain And On Wet Roads

    Driving in Rain and on Wet Roads You can be temporarily blinded by approaching headlamps. It can take a second or two, or even several seconds, for your eyes to re-adjust to the dark. When you are faced with severe glare, as from a driver who does not lower the high beams, or a vehicle with misaimed headlamps, slow down a little.
  • Page 387 And, if your tires do not have much tread left, you will get even less traction. It is always wise to CAUTION: go slower and be cautious if rain starts to fall while you are driving. The surface may get wet Wet brakes can cause accidents.
  • Page 388 Hydroplaning Hydroplaning usually happens at higher speeds. There just is not a hard and fast rule about Hydroplaning is dangerous. So much water can hydroplaning. The best advice is to slow down build up under your tires that they can actually ride when it is raining.
  • Page 389 Driving Through Flowing Water Some Other Rainy Weather Tips • Turn on your low-beam headlamps — not just your parking lamps — to help make you more CAUTION: visible to others. • Besides slowing down, allow some extra Flowing or rushing water creates strong following distance.
  • Page 390: City Driving

    City Driving Here are ways to increase your safety in city driving: • Know the best way to get to where you are going. Get a city map and plan your trip into an unknown part of the city just as you would for a cross-country trip.
  • Page 391: Freeway Driving

    Freeway Driving The most important advice on freeway driving is: Keep up with traffic and keep to the right. Drive at the same speed most of the other drivers are driving. Too-fast or too-slow driving breaks a smooth traffic flow. Treat the left lane on a freeway as a passing lane.
  • Page 392: Before Leaving On A Long Trip

    Before Leaving on a Long Trip Before changing lanes, check your mirrors. Then use your turn signal. Make sure you are ready. Try to be well rested. If Just before you leave the lane, glance quickly you must start when you are not fresh — such over your shoulder to make sure there is not as after a day’s work —...
  • Page 393: Highway Hypnosis

    Highway Hypnosis Here are some things you can check before a trip: • Windshield Washer Fluid: Is the reservoir Is there actually such a condition as highway full? Are all windows clean inside and outside? hypnosis? Or is it just plain falling asleep at the •...
  • Page 394: Hill And Mountain Roads

    Hill and Mountain Roads If you drive regularly in steep country, or if you are planning to visit there, here are some tips that can make your trips safer and more enjoyable. See Off-Road Driving on page 366 for information about driving off-road.
  • Page 395 • Know how to go uphill. You may want to shift down to a lower gear. The lower gears help CAUTION: cool your engine and transmission, and you can climb the hill better. Coasting downhill in NEUTRAL (N) or with •...
  • Page 396: Winter Driving

    Winter Driving Include an ice scraper, a small brush or broom, a supply of windshield washer fluid, a rag, some winter outer clothing, a small shovel, a flashlight, a red cloth, and reflective warning triangles. And, if you will be driving under severe conditions, include a small bag of sand, a piece of old carpet, or a couple of burlap bags to help provide traction.
  • Page 397 Whatever the condition — smooth ice, packed, blowing, or loose snow — drive with caution. If you have the Traction Assist System (TAS), it will improve your ability to accelerate when driving on a slippery road. But you can turn the TAS off if you ever need to.
  • Page 398: If You Are Caught In A Blizzard

    If You Are Caught in a Blizzard The Anti-Lock Brake System (ABS) improves your vehicle’s stability when you make a hard stop If you are stopped by heavy snow, you could be in on a slippery road. Even though you have ABS, a serious situation.
  • Page 399 CAUTION: Snow can trap exhaust gases under your vehicle. This can cause deadly CO (carbon monoxide) gas to get inside. CO could overcome you and kill you. You cannot see it or smell it, so you might not know it is in your vehicle. Clear away snow from around the base of your vehicle, especially any that is blocking the exhaust pipe.
  • Page 400: If Your Vehicle Is Stuck In Sand, Mud, Ice, Or Snow

    If Your Vehicle is Stuck in Sand, You will need a well-charged battery to restart the vehicle, and possibly for signaling later on with Mud, Ice, or Snow your headlamps. Let the heater run for a while. In order to free your vehicle when it is stuck, you Then, shut the engine off and close the window need to spin the wheels, but you do not want almost all the way to preserve the heat.
  • Page 401: Rocking Your Vehicle To Get It Out

    Notice: Spinning the wheels can destroy parts Then shift back and forth between REVERSE (R) of your vehicle as well as the tires. If you and a forward gear, or with a manual transmission, spin the wheels too fast while shifting between FIRST (1) or SECOND (2) and the transmission back and forth, you can REVERSE (R), spinning the wheels as little as...
  • Page 402: Recovery Hooks

    Recovery Hooks CAUTION: These hooks, when used, are under a lot of force. Always pull the vehicle straight out. Never pull on the hooks at a sideways angle. The hooks could break off and you or others could be injured from the chain or cable snapping back.
  • Page 403: Loading Your Vehicle

    Loading Your Vehicle Tire and Loading Information Label It is very important to know how much weight your vehicle can carry. This weight is called the vehicle capacity weight and includes the weight of all occupants, cargo, and all nonfactory-installed options.
  • Page 404 The Tire and Loading Information label also shows 3. Subtract the combined weight of the driver the size of the original equipment tires (C) and and passengers from XXX kg or XXX lbs. the recommended cold tire inflation pressures (D). 4.
  • Page 405 Example 1 Example 2 Item Description Total Item Description Total Vehicle Capacity Weight Vehicle Capacity Weight 1,000 lbs (453 kg) 1,000 lbs (453 kg) for Example 1 = for Example 2 = Subtract Occupant Subtract Occupant Weight 150 lbs 300 lbs (136 kg) Weight 150 lbs 750 lbs (136 kg) (68 kg) ×...
  • Page 406 Certification/Tire Label Example 3 Item Description Total Vehicle Capacity Weight 1,000 lbs (453 kg) for Example 3 = A vehicle specific Certification/Tire label is found Subtract Occupant Weight 200 lbs 1000 lbs (453 kg) on the rear edge of the driver’s door. The (91 kg) ×...
  • Page 407 To find out the actual loads on your front and rear axles, you need to go to a weigh station and weigh CAUTION: your vehicle. Your dealer can help you with this. Be sure to spread out your load equally on both sides Do not load your vehicle any heavier than of the centerline.
  • Page 408 If you put things inside your vehicle — like suitcases, tools, packages, or anything else — they CAUTION: (Continued) go as fast as the vehicle goes. If you have to stop or turn quickly, or if there is a crash, they will keep •...
  • Page 409 Two-Tiered Loading Add-On Equipment By positioning four 2 inches (5 cm) by 6 inches When you carry removable items, you may need (15 cm) wooden planks across the width of to put a limit on how many people you carry the pickup box, you can create an upper load inside your vehicle.
  • Page 410: Adding A Snow Plow Or Similar Equipment

    Adding a Snow Plow or Similar How do I know if my vehicle can handle a snow plow? Equipment Some vehicles are built with a special snow Before installing a snow plow on your vehicle, plow prep package, called RPO VYU. If your here are some things you will need to know: vehicle has this option, you can add a plow to it, provided certain weights, such as the weights...
  • Page 411 • Say, for example, you have a 700 lb (318 kg) The snow plow manufacturer or installer can snow plow. The total weight of all occupants and assist you in determining the amount of rear cargo inside the cab should not exceed 300 lb ballast required, to help make sure your (135 kg).
  • Page 412 United States Canada In order to calculate the amount of weight any front accessory, such as a snow plow, is adding to (W x (A + W.B.)) /W.B.= Weight the accessory is the front axle, use the following formula: adding to the front axle. Where: W = Weight of added accessory A = Distance that the accessory is in front of the...
  • Page 413 For example, adding a 700 lb (318 kg) snow plow actually adds more than 700 lbs (318 kg) to the CAUTION: front axle. Using the formula, if the snow plow is 4 ft (122 cm) in front of the front axle and the On some vehicles that have certain front wheel base is 10 ft (305 cm), then: mounted equipment, such as a snow...
  • Page 414 Emergency Roof Lamp Provisions What is total vehicle reserve capacity? Vehicles with the RPO VYU snow plow prep This is the difference between your GVWR and package also have an emergency roof lamp the weight of your truck with full fuel and provision package, RPO TRW.
  • Page 415: Truck-Camper Loading Information

    Truck-Camper Loading Information Refer to the Truck-Camper Loading Information label in the glove box for dimensions A and B as A vehicle specific Truck-Camper Loading shown in the following illustration. information label is attached to the inside of your vehicle’s glove box. This label will tell you if your vehicle can carry a slide-in camper, how much of a load your vehicle can carry, and how to correctly spread out the load.
  • Page 416 Here is an example of proper truck and camper You must weigh any accessories or other match: equipment that you add to your vehicle. Then, subtract this extra weight from the CWR. This extra weight may shorten the center of gravity zone of your vehicle.
  • Page 417: Pickup Conversion To Chassis Cab

    Pickup Conversion to Chassis Cab Secure loose items to prevent weight shifts that could affect the balance of your vehicle. When the General Motors is aware that some vehicle truck-camper is loaded, drive to a scale and owners may consider having the pickup box weigh on the front and on the rear wheels removed and a commercial or recreational body separately to determine axle loads.
  • Page 418: Recreational Vehicle Towing

    Recreational Vehicle Towing • Do you have the proper towing equipment? See your dealer or trailering professional Recreational vehicle towing means towing your for additional advice and equipment vehicle behind another vehicle – such as behind a recommendations. motorhome. The two most common types of •...
  • Page 419 Four-Wheel-Drive Vehicles CAUTION: Shifting a four-wheel-drive vehicle’s transfer case into NEUTRAL can cause your vehicle to roll even if the transmission is in PARK (P) for an automatic transmission, or if your vehicle is in gear, for a manual transmission. You or others could be injured.
  • Page 420 Dolly Towing Four-Wheel-Drive Vehicles Front Towing (Front Wheels Off the Ground) Two-Wheel-Drive Vehicles Notice: If you tow a two-wheel-drive vehicle with the rear wheels on the ground, the transmission could be damaged. The repairs would not be covered by your warranty. Never tow your vehicle with the rear wheels on the ground.
  • Page 421 Rear Towing (Rear Wheels Off the 5. Securely attach the vehicle being towed to the tow dolly. Ground) Two-Wheel-Drive Vehicles Use the following procedure to tow your vehicle CAUTION: from the rear: 1. Drive the vehicle onto the dolly. Shifting a four-wheel-drive vehicle’s 2.
  • Page 422 Four-Wheel-Drive Vehicles CAUTION: Use the following procedure to tow your vehicle from the rear: 1. Drive the vehicle onto the dolly. Shifting a four-wheel-drive vehicle’s transfer case into NEUTRAL can cause 2. Firmly set the parking brake. See Parking your vehicle to roll even if the Brake on page 168 transmission is in PARK (P) for an 3.
  • Page 423: Towing A Trailer

    Towing a Trailer Notice: Pulling a trailer improperly can damage your vehicle and result in costly If your vehicle has a diesel engine, see the repairs not covered by your warranty. To pull a ® DURAMAX Diesel manual for more information. trailer correctly, follow the advice in this part, and see your dealer for important Do not tow a trailer during break-in.
  • Page 424: Tow/Haul Mode

    If You Do Decide To Pull A Trailer • If you have an automatic transmission, you can tow in DRIVE (D). You may want to If you do, here are some important points: shift the transmission to THIRD (3) or, if •...
  • Page 425 Weight of the Trailer Tow/Haul is designed to be most effective when the vehicle and trailer combined weight is at How heavy can a trailer safely be? least 75 percent of the vehicle’s Gross Combined Weight Rating (GCWR). See “Weight of the It depends on how you plan to use your rig.
  • Page 426 C-1500 Regular Cab Axle Ratio Maximum Trailer Weight GCWR Standard Box (2WD)* 4300 V6 (Auto) 3.23 5,000 lbs (2 268 kg) 9,500 lbs (4 309 kg) 4300 V6 (Manual) 3.23 4,000 lbs (1 814 kg) 8,500 lbs (3 855 kg) 3.23 6,400 lbs (2 903 kg) 11,000 lbs (4 994 kg)
  • Page 427 C-1500 HD Crew Cab Maximum Trailer Weight GCWR Standard Box (2WD)* Axle Ratio 3.73 8,300 lbs (3 765 kg) 14,000 lbs (6 350 kg) 6000 V8 4.10 10,300 lbs (4 672 kg) 16,000 lbs (7 257 kg) * Fifth-wheel or gooseneck kingpin weight 15 percent to 25 percent of trailer weight up to 2,500 lbs (1 133 kg) maximum.
  • Page 428 C-1500 Regular Cab Axle Ratio Maximum Trailer Weight GCWR Long Box (2WD)* 3.23 7,200 lbs (3 266 kg) 12,000 lbs (5 448 kg) 5300 V8 3.73 8,200 lbs (3 719 kg) 13,000 lbs (5 902 kg) *Fifth-wheel or gooseneck kingpin weight 15 percent to 25 percent of trailer weight up to 1,500 lbs (680 kg) maximum.
  • Page 429 K-1500 Regular Cab Axle Ratio Maximum Trailer Weight GCWR Standard Box (4WD)* 3.42 8,100 lbs (3 674 kg) 13,000 lbs (5 902 kg) 5300 V8 3.73 8,100 lbs (3 674 kg) 13,000 lbs (5 902 kg) 4.10 9,100 lbs (4 128 kg) 14,000 lbs (6 356 kg) * Fifth-wheel or gooseneck kingpin weight 15 percent to 25 percent of trailer weight up to 1,500 lbs (680 kg) maximum.
  • Page 430 K-1500 HD Crew Cab Axle Ratio Maximum Trailer Weight GCWR Standard Box (4WD)* 3.73 7,900 lbs (3 583 kg) 14,000 lbs (6 350 kg) 6000 V8 4.10 9,900 lbs (4 491 kg) 16,000 lbs (7 257 kg) * Fifth-wheel or gooseneck kingpin weight 15 percent to 25 percent of trailer weight up to 2,500 lbs (1 133 kg) maximum.
  • Page 431 K-1500 Regular Cab Axle Ratio Maximum Trailer Weight GCWR Long Box (4WD)* 3.42 6,900 lbs (3 130 kg) 12,000 lbs (5 443 kg) 4800 V8 3.73 6,900 lbs (3 130 kg) 12,000 lbs (5 443 kg) 4.10 7,900 lbs (3 583 kg) 13,000 lbs (5 897 kg) 3.42 7,900 lbs (3 583 kg)
  • Page 432 C-2500 Extended Cab Standard Box Axle Ratio Maximum Trailer Weight GCWR HD (2WD)* 6000 V8 4.10 10,300 lbs (4 672 kg) 16,000 lbs (7 257 kg) 3.73 13,900 lbs (6 305 kg) 20,000 lbs (9 072 kg) 8100 V8 4.10 15,900 lbs (7 212 kg) 22,000 lbs (9 979 kg) 6.6L V8 Diesel...
  • Page 433 C-2500 Regular Cab Axle Ratio Maximum Trailer Weight GCWR Long Box HD (2WD)* 6.6L V8 Diesel 3.73 15,900 lbs (7 212 kg) 22,000 lbs (9 979 kg) *Fifth-wheel or gooseneck kingpin tongue weight should be 15 percent to 25 percent of trailer weight up to 3,000 lbs (1 361 kg) maximum.
  • Page 434 K-2500 Extended Cab Standard Box HD Axle Ratio Maximum Trailer Weight GCWR (4WD)* 6000 V8 4.10 10,000 lbs (4 536 kg) 16,000 lbs (7 257 kg) 3.73 13,600 lbs (6 169 kg) 20,000 lbs (9 072 kg) 8100 V8 4.10 15,600 lbs (7 076 kg) 22,000 lbs (9 979 kg) 6.6L V8 Diesel...
  • Page 435 K-2500 Regular Cab Maximum Trailer Weight GCWR Long Box HD (4WD)* Axle Ratio 6.6L V8 Diesel 3.73 15,600 lbs (7 076 kg) 22,000 lbs (9 979 kg) *Fifth-wheel or gooseneck kingpin weight should be 15 percent to 25 percent of trailer weight up to 3,000 lbs (1 361 kg) maximum.
  • Page 436 C-3500 Regular Axle Ratio Maximum Trailer Weight GCWR Cab (2WD)* 6000 V8 4.10 10,300 lbs (4 672 kg) 16,000 lbs (7 257 kg) *Fifth-wheel or gooseneck kingpin weight should be 15 percent to 25 percent of trailer weight up to 3,500 lbs (1 587 kg) maximum.
  • Page 437 C-3500 Crew Axle Ratio Maximum Trailer Weight GCWR Cab (2WD)* 6000 V8 4.10 9,600 lbs (4 354 kg) 16,000 lbs (7 257 kg) 6000 V8 (Dual Rear 4.10 9,500 lbs (4 309 kg) 16,000 lbs (7 257 kg) Wheels) 8100 V8 4.10 15,300 lbs (6 940 kg) 22,000 lbs (9 979 kg)
  • Page 438 K-3500 Regular Axle Ratio Maximum Trailer Weight GCWR Cab (4WD)* 8100 V8 Dual Rear 4.10 15,400 lbs (6 985 kg) 22,000 lbs (9 979 kg) Wheel 6.6L V8 Single Rear 3.73 15,400 lbs (6 985 kg) 22,000 lbs (9 979 kg) Wheel 6.6L V8 Dual Rear 3.73...
  • Page 439 K-3500 Extended Axle Ratio Maximum Trailer Weight GCWR Cab (4WD)* 6.6L V8 Dual Rear 3.73 14,800 lbs (6 713 kg) 22,000 lbs (9 979 kg) Wheel (Manual) 6.6L V8 Dual Rear 3.73 16,300 lbs (7 394 kg) 23,500 lbs (10 659 kg) Wheel (Automatic) * Fifth-wheel or gooseneck kingpin weight should be 15 percent to 25 percent of trailer weight up to 3,500 lbs (1 587 kg) maximum.
  • Page 440 K-3500 Crew Axle Ratio Maximum Trailer Weight GCWR Cab (4WD)* 6.6L V8 Diesel Dual 3.73 14,500 lbs (6 557 kg) 22,000 lbs (9 979 kg) Rear Wheel (Manual) 6.6L V8 Diesel Dual 3.73 16,000 lbs (7 257 kg) 23,500 lbs (10 659 kg) Rear Wheel (Automatic) *Fifth-wheel or gooseneck kingpin weight should be 15 percent to 25 percent of trailer weight up to 3,500 lbs (1 587 kg) maximum.
  • Page 441 Weight of the Trailer Tongue The tongue load (A) of any trailer is an important weight to measure because it affects the total or gross weight of your vehicle. The Gross Vehicle Weight (GVW) includes the curb weight of the vehicle, any cargo you may carry in it, and the people who will be riding in the vehicle.
  • Page 442 Fifth wheel or gooseneck kingpin weight should be Consider the following example: 15 to 25 percent of the trailer weight up to the A vehicle model base weight is 5,500 lbs maximum amount specified in the trailering chart for (2 495 kg); 2,800 lbs (1 270 kg) at the front axle your vehicle.
  • Page 443 Since the rear axle already weighs 2,700 lbs You may go further and think you must limit (1 225 kg), adding 1,275 lbs (578 kg) brings the tongue weight to less than 1,000 lbs (454 kg) to total to 3,975 lbs (1 803 kg). This is very close to, avoid exceeding GVWR.
  • Page 444 Total Weight on Your Vehicle’s Tires Weight-Distributing Hitches and Weight Carrying Hitches Be sure your vehicle’s tires are inflated to the upper limit for cold tires. You’ll find these numbers on the Certification label at the rear edge of the driver’s door or see Loading Your Vehicle for more information.
  • Page 445 If you use a step-bumper hitch, the bumper could Fifth wheel or gooseneck kingpin weight should be be damaged in sharp turns. Make sure there is 15 to 25 percent of the trailer weight up to the ample room when turning to avoid contact between maximum amount specified in the trailering chart the trailer and the bumper.
  • Page 446 Safety Chains Trailer Brakes You should always attach chains between your If your trailer weighs more than 2,000 lbs (900 kg) vehicle and your trailer. Cross the safety loaded, then it needs its own brakes – and they chains under the tongue of the trailer to help must be adequate.
  • Page 447 Driving with a Trailer CAUTION: (Continued) CAUTION: • If exhaust does come into your vehicle through a window in the rear or another opening, drive with your front, If you have a rear-most window open and main heating or cooling system on you pull a trailer with your vehicle, carbon and with the fan on any speed.
  • Page 448 Passing Before you start, check all trailer hitch parts and attachments, safety chains, electrical connector, You’ll need more passing distance up ahead when lamps, tires and mirror adjustment. If the trailer has you’re towing a trailer. And, because you’re a good electric brakes, start your vehicle and trailer deal longer, you’ll need to go much farther beyond moving and then apply the trailer brake controller...
  • Page 449 Turn Signals When Towing a Trailer You may also want to activate the tow/haul mode if the transmission shifts too often. See Tow/Haul The arrows on your instrument panel will Mode Light on page 261. flash whenever you signal a turn or lane change. If you have a 5-speed manual transmission and Properly hooked up, the trailer lamps will also you are towing a trailer, it’s better not to use...
  • Page 450 Parking on Hills 3. When the wheel chocks are in place, release the regular brakes until the chocks absorb the load. CAUTION: 4. Reapply the regular brakes. Then apply your parking brake and shift into PARK (P) for an automatic transmission, or REVERSE (R) for a You really should not park your vehicle, manual transmission.
  • Page 451 CAUTION: (Continued) CAUTION: If the transfer case on four-wheel-drive It can be dangerous to get out of your vehicles is in NEUTRAL, your vehicle will vehicle if the automatic transmission shift be free to roll, even if your automatic lever is not fully in PARK (P) with the transmission shift lever is in PARK (P).
  • Page 452 Maintenance When Trailer Towing Your vehicle will need service more often when you’re pulling a trailer. See Scheduled Maintenance (Gasoline Engine) on page 613 for more information. Things that are especially important in trailer operation are automatic transmission fluid (don’t overfill), engine oil, axle lubricant, belt, cooling system and brake system.
  • Page 453 Heavy-DutyTrailer Wiring Harness • Light Green: Back-up Lamps Package • Light Blue: CHMSL* • Red: Battery Feed** • Dark Blue: Trailer Brake *The Center High-Mounted Stoplamp (CHMSL) wire is tied next to the trailer wiring harness for use with a trailer, slide-in camper or cap. **If you are charging a remote (non-vehicle) battery, press the tow/haul mode button located at the end of the shift lever.
  • Page 454 Camper/Fifth-Wheel Trailer Wiring Package The eight-wire camper harness is located under the front edge of the pickup box on the driver’s side of the vehicle, attached to the frame bracket. A connector will have to be added to the wiring harness which connects to the camper.
  • Page 455 Electric Brake Control Jumper CAUTION: Be sure to use only the correct trailer brake harness, the one intended for use on your vehicle. If you use some other trailer brake harness, even if it seems to fit, your trailer brakes may not work at all. You could have a crash in which you or others could be injured.
  • Page 456 Auxiliary Battery The auxiliary battery circuit is protected by a megafuse located behind the auxiliary battery. The auxiliary battery provision can be used to Be sure to follow the proper installation instructions supply electrical power to additional equipment that that are included with any electrical equipment you may choose to add, such as a slide-in that you install.
  • Page 457: Trailer Recommendations

    Trailer Recommendations 4. Engage the PTO. Refer to the manufacturer’s or installer’s for instructions on electrically You must subtract your hitch loads from the CWR engaged PTOs. for your vehicle. Weigh your vehicle with the 5. For mobile operations, shift the transmission trailer attached, so that you won’t go over into the gear you want, apply the regular the GVWR or GAWR.
  • Page 458 To use PTO speed control in Preset Mode Please note that the standby speed (800/850 rpm) (Factory Setting) do the following: is not to be used as a PTO control speed. Vehicles not equipped with cruise control will not 1. Engage the PTO. have the resume speed capability.
  • Page 459 Variable Mode: PTO speed control mode can be When the PTO switch is turned on, the engine is used for both stationary and mobile applications. limited to 2,200 rpms. If there are no accessories This mode allows PTO to be controlled in a fashion installed on the vehicle, make sure the PTO switch similar to how cruise control sets vehicle speed.
  • Page 460 ✍ NOTES...
  • Page 461: Service And Appearance Care

    Section 5 Service and Appearance Care Service ............464 Engine Air Cleaner/Filter Accessories and Modifications ....464 (Gasoline Engines) ......... 487 California Proposition 65 Warning ....465 Automatic Transmission Fluid ® Doing Your Own Service Work ....465 (Allison Transmission ) ......
  • Page 462 Section 5 Service and Appearance Care Rear Axle ............ 523 Tires ............539 Tire Sidewall Labeling ....... 540 Four-Wheel Drive ........524 Tire Terminology and Definitions ....544 Front Axle ........... 525 Inflation - Tire Pressure ......547 Noise Control System ......... 527 Dual Tire Operation ........
  • Page 463 Section 5 Service and Appearance Care Appearance Care ........585 Underbody Maintenance ......592 Cleaning the Inside of Your Vehicle ..585 Chemical Paint Spotting ......592 Fabric/Carpet ..........586 Vehicle Care/Appearance Materials .... 593 Leather ............587 Vehicle Identification ........594 Instrument Panel, Vinyl, and Other Vehicle Identification Number (VIN) ...
  • Page 464: Service

    Service Accessories and Modifications When you add non-GM accessories to your vehicle Your dealer knows your vehicle best and wants they can affect your vehicle’s performance and you to be happy with it. We hope you will go safety, including such things as, airbags, braking, to your dealer for all your service needs.
  • Page 465: California Proposition 65 Warning

    California Proposition 65 Warning CAUTION: (Continued) Most motor vehicles, including this one, contain and/or emit chemicals known to the State of • Be sure to use the proper nuts, bolts, California to cause cancer and birth defects or other and other fasteners. English and reproductive harm.
  • Page 466: Adding Equipment To The Outside Of Your Vehicle

    Adding Equipment to the Outside of The 8th digit of the Vehicle Identification Number (VIN) shows the code letter or number that Your Vehicle identifies your vehicle’s engine. The VIN is at the top left of the instrument panel. See Vehicle Things you might add to the outside of your Identification Number (VIN) on page 594.
  • Page 467: Gasoline Specifications

    California Fuel If your vehicle has the 6.0L V8 engine (VIN Code N), use premium unleaded gasoline If your vehicle is certified to meet California with a posted octane rating of 91 or higher. You Emissions Standards, it is designed to operate on may also use regular unleaded gasoline rated at fuels that meet California specifications.
  • Page 468: Additives

    Additives Notice: Your vehicle was not designed for fuel that contains methanol. Do not use To provide cleaner air, all gasolines in the United fuel containing methanol. It can corrode metal States are now required to contain additives parts in the fuel system and also damage that will help prevent engine and fuel system plastic and rubber parts.
  • Page 469: Fuel E85 (85% Ethanol)

    Fuel E85 (85% Ethanol) At a minimum, E85 should meet ASTM Specification D 5798. By definition, this means The 8th digit of the Vehicle Identification Number that fuel labeled E85 will have an ethanol content (VIN) shows the code letter or number that between 70% and 85%.
  • Page 470: Fuels In Foreign Countries

    Filling the Tank E85 has less energy per gallon than gasoline, so you will need to refill the fuel tank more often when using E85 than when you are using gasoline. See Filling the Tank on page 470. CAUTION: Notice: Some additives are not compatible with E85 fuel and can harm your vehicle’s fuel Fuel vapor burns violently and a fuel fire system.
  • Page 471 CAUTION: Fuel can spray out on you if you open the fuel cap too quickly. If you spill fuel and then something ignites it, you could be badly burned. This spray can happen if your tank is nearly full, and is more likely in hot weather.
  • Page 472 When replacing the fuel cap, turn it clockwise until it clicks. It will require more effort to turn the CAUTION: fuel cap on the last turn as you tighten it. Make sure the cap is fully installed. The diagnostic If a fire starts while you are refueling, do system can determine if the fuel cap has been left off or improperly installed.
  • Page 473: Filling A Portable Fuel Container

    Filling a Portable Fuel Container CAUTION: (Continued) • CAUTION: Bring the fill nozzle in contact with the inside of the fill opening before operating the nozzle. Contact should Never fill a portable fuel container while it be maintained until the filling is is in your vehicle.
  • Page 474: Checking Things Under The Hood

    Checking Things Under CAUTION: the Hood Things that burn can get on hot engine CAUTION: parts and start a fire. These include liquids like fuel, oil, coolant, brake fluid, windshield washer and other fluids, and An electric fan under the hood can start up plastic or rubber.
  • Page 475: Hood Release

    Hood Release To open the hood do the following: 1. Pull the handle with this symbol on it. It is located inside the vehicle to the lower left of the steering wheel. 2. Then go to the front of the vehicle and pull up on the secondary hood release located near the center of the grille.
  • Page 476: Engine Compartment Overview

    Engine Compartment Overview ® ® If your vehicle has the DURAMAX Diesel engine, see the DURAMAX Diesel manual for more information. When you open the hood on the 4.3L V6 engine, here is what you will see:...
  • Page 477 A. Engine Air Cleaner/Filter. See Engine Air G. Engine Oil Fill Cap. See “When to Add Engine Cleaner/Filter (Gasoline Engines) on page 487. Oil” under Engine Oil (Gasoline Engine) on page 482. B. Coolant Surge Tank and Pressure Cap. See Engine Coolant on page 498 and Coolant H.
  • Page 478 When you open the hood on the 5.3L V8 engine (4.8L and 6.0L V8 engines similar), here is what you will see:...
  • Page 479 A. Engine Air Cleaner/Filter. See Engine Air G. Engine Cooling Fan. See Cooling System on Cleaner/Filter (Gasoline Engines) on page 487. page 504. B. Coolant Surge Tank and Pressure Cap. See H. Remote Negative (−) Terminal (GND). See Engine Coolant on page 498 and Coolant Jump Starting on page 517.
  • Page 480 When you open the hood on the 8.1L V8 engine, here is what you will see:...
  • Page 481 A. Engine Air Cleaner/Filter. See Engine Air G. Engine Cooling Fan. See Cooling System on Cleaner/Filter (Gasoline Engines) on page 487. page 504. B. Coolant Surge Tank and Pressure Cap. See H. Remote Negative (−) Terminal (GND). See Engine Coolant on page 498 and Coolant Jump Starting on page 517.
  • Page 482: Engine Oil (Gasoline Engine)

    Engine Oil (Gasoline Engine) Checking Engine Oil It is a good idea to check the engine oil every time If your vehicle has a diesel engine, see “Engine ® you get fuel. In order to get an accurate reading, Oil” in the DURAMAX Diesel Engine Supplement.
  • Page 483 When to Add Engine Oil Notice: Do not add too much oil. If the engine has so much oil that the oil level gets above the cross-hatched area that shows the proper operating range, the engine could be damaged. See Engine Compartment Overview on page 476 for the All Except 8.1L Engine...
  • Page 484 What Kind of Engine Oil to Use These numbers on an oil container show its viscosity, or thickness. Do not use other viscosity oils such as SAE 20W-50. • American Petroleum Institute (API) starburst symbol Oils meeting these requirements should have the starburst symbol on the container.
  • Page 485: Engine Oil Life System (Gasoline Engine)

    ® GM Goodwrench oil meets all the requirements conditions, the mileage at which an oil change will for your vehicle. be indicated can vary considerably. For the oil life system to work properly, you must reset If you are in an area of extreme cold, where the the system every time the oil is changed.
  • Page 486 How to Reset the Engine Oil What to Do with Used Oil Life System Used engine oil contains certain elements that may be unhealthy for your skin and could even cause The Engine Oil Life System calculates when to cancer. Do not let used oil stay on your skin for very change the engine oil and filter based on vehicle long.
  • Page 487: Engine Air Cleaner/Filter (Gasoline Engines)

    Engine Air Cleaner/Filter (Gasoline When to Inspect the Engine Air Cleaner/Filter Engines) If your vehicle has an air filter restriction indicator, If your vehicle has a diesel engine, see “Pickup it lets you know when the engine air cleaner/filter Models” under “Engine Air Cleaner/Filter” in needs to be replaced.
  • Page 488 How to Inspect the Engine Air Replacing the Engine Air Cleaner/Filter and Resetting the Air Filter Restriction Cleaner/Filter Indicator Vehicles With an Air Filter Restriction Indicator Locate the air filter restriction indicator on the engine air cleaner/filter cover. When the indicator turns black or is in the red/orange “change”...
  • Page 489 6. Reinstall the cover and tighten the screws. 7. Reset the air filter restriction indicator, if the vehicle has one, by pressing the button at the end of the indicator. CAUTION: Operating the engine with the air cleaner/filter off can cause you or others to be burned.
  • Page 490: Automatic Transmission Fluid (Allison Transmission ® )

    Automatic Transmission Fluid Notice: Too much or too little fluid can damage your transmission. Too much can ® (Allison Transmission mean that some of the fluid could come out and fall on hot engine parts or exhaust system ® If your vehicle has the DURAMAX Diesel engine, parts, starting a fire.
  • Page 491 3. With your foot on the brake pedal, run the 3. Check the fluid level reading. Repeat the engine for at least once minute and shift to check procedure to verify the reading. DRIVE (D). Then shift to NEUTRAL (N) and 4.
  • Page 492 Hot Check Procedure How to Add Automatic Transmission Fluid The fluid must be hot to ensure an accurate check. The fluid level rises as the temperature Refer to the Maintenance Schedule to determine increases. what kind of transmission fluid to use. See 1.
  • Page 493: Automatic Transmission Fluid (Except Allison Transmission )

    Automatic Transmission Fluid Notice: Too much or too little fluid can damage your transmission. Too much can ® (Except Allison Transmission mean that some of the fluid could come out and fall on hot engine parts or exhaust system ® If your vehicle has the DURAMAX Diesel engine, parts, starting a fire.
  • Page 494 A cold fluid check can be made after the vehicle Then, without shutting off the engine, follow has been sitting for eight hours or more with these steps: the engine off, but this is used only as a reference. The transmission Let the engine run at idle for five minutes if dipstick handle with this outside temperatures are 50°F (10°C) or more.
  • Page 495 How to Add Automatic Transmission Fluid Refer to the Maintenance Schedule to determine what kind of transmission fluid to use. See Recommended Fluids and Lubricants on page 625. Add fluid only after checking the transmission fluid while it is hot. A cold check is used only as a reference.
  • Page 496: Manual Transmission Fluid

    Manual Transmission Fluid Check the fluid level only when your engine is off, the vehicle is parked on a level place, and the When to Check Manual Transmission transmission is cool enough for you to rest your fingers on the transmission case. Fluid Then, follow these steps: A good time to have your manual transmission...
  • Page 497: Hydraulic Clutch

    How to Add Manual Transmission Fluid When to Check and What to Use Here is how to add fluid. Refer to the Maintenance The clutch master Schedule to determine what kind of fluid to cylinder reservoir is use. See Recommended Fluids and Lubricants on located in the rear of the page 625.
  • Page 498: Engine Coolant

    How to Check and Add Fluid A 50/50 mixture of clean, drinkable water and ® DEX-COOL coolant will: The proper fluid should be added if the level does • Give freezing protection down to not reach the bottom of the diaphragm when it −34°F (−37°C).
  • Page 499 What to Use Notice: If you use an improper coolant mixture, your engine could overheat and be Use a mixture of one-half clean, drinkable water badly damaged. The repair cost would not be ® and one-half DEX-COOL coolant which will covered by your warranty.
  • Page 500 Checking Coolant The vehicle must be on a level surface. When your engine is cold, the coolant level should be at The coolant surge tank is located in the engine the FULL COLD mark. compartment on the passenger’s side of the If your vehicle is equipped with a low coolant vehicle.
  • Page 501: Coolant Surge Tank Pressure Cap

    Adding Coolant Coolant Surge Tank Pressure Cap If you need more coolant, add the proper Notice: If the pressure cap is not tightly ® DEX-COOL coolant mixture at the surge tank, installed, coolant loss and possible engine but only when the engine is cool. See Cooling damage may occur.
  • Page 502 If Steam Is Coming From Your Engine CAUTION: (Continued) CAUTION: See Overheated Engine Protection Operating Mode (V8 Engines Only) on Steam from an overheated engine can page 504 for information on driving to a burn you badly, even if you just open the safe place in an emergency.
  • Page 503 If No Steam Is Coming From If you no longer have the overheat warning, you can drive. Just to be safe, drive slower for Your Engine about 10 minutes. If the warning does not come The ENGINE COOLANT HOT message, along back on, you can drive normally.
  • Page 504: Overheated Engine Protection Operating Mode (V8 Engines Only)

    Overheated Engine Protection Cooling System Operating Mode (V8 Engines Only) ® If your vehicle has the DURAMAX Diesel engine, ® see the DURAMAX Diesel manual for more If an overheated engine condition exists and information. the REDUCED ENGINE POWER message When you decide it is safe to lift the hood, here is is displayed, an overheat protection mode which alternates firing groups of cylinders helps...
  • Page 505 CAUTION: An electric fan under the hood can start up and injure you even when the engine is not running. Keep hands, clothing, and tools away from any underhood electric fan. If the coolant inside the coolant surge tank is boiling, do not do anything else until it cools down.
  • Page 506 The coolant level should If your vehicle has an electric engine cooling fan, be at or above the check the coolant temperature gage. If the coolant FULL COLD mark. If it temperature is approximately 232°F (111°C), the is not, you may electric cooling fan should be running.
  • Page 507 How to Add Coolant to the Coolant If no coolant is visible in the surge tank, add coolant as follows: Surge Tank for Gasoline Engines If your vehicle has a diesel engine, see “Cooling CAUTION: ® System” in the DURAMAX Diesel Supplement for the proper coolant fill procedure.
  • Page 508 CAUTION: CAUTION: Adding only plain water to your cooling You can be burned if you spill coolant on system can be dangerous. Plain water, or hot engine parts. Coolant contains some other liquid such as alcohol, can ethylene glycol and it will burn if the boil before the proper coolant mixture will.
  • Page 509 2. Then keep turning the pressure cap slowly, and remove it. 4. With the coolant surge tank pressure cap off, start the engine and let it run until you can feel the upper radiator hose getting hot. Watch 3. Fill the coolant surge tank with the proper out for the engine cooling fan.
  • Page 510: Engine Fan Noise

    Engine Fan Noise You may also hear this fan noise when you start the engine. It will go away as the fan clutch If your vehicle has a clutched engine cooling fan, partially disengages. when the clutch is engaged, the fan spins If your vehicle has electric cooling fans, you may faster to provide more air to cool the engine.
  • Page 511: Power Steering Fluid

    Power Steering Fluid How to Check Power Steering Fluid To check the power steering fluid, do the following: See Engine 1. Turn the key off and let the engine Compartment Overview compartment cool down. on page 476 for reservoir location. 2.
  • Page 512: Windshield Washer Fluid

    Windshield Washer Fluid Notice: • When using concentrated washer fluid, What to Use follow the manufacturer’s instructions for adding water. When you need windshield washer fluid, be sure to • read the manufacturer’s instructions before use. If Do not mix water with ready-to-use washer you will be operating your vehicle in an area where fluid.
  • Page 513: Brakes

    Brakes So, it is not a good idea to top off the brake fluid. Adding brake fluid will not correct a leak. If Brake Fluid you add fluid when the linings are worn, then you will have too much fluid when you get new brake linings.
  • Page 514 Checking Brake Fluid Always clean the brake fluid reservoir cap and the area around the cap before removing it. This You can check the brake fluid without taking off will help keep dirt from entering the reservoir. the cap. Just look at the brake CAUTION: fluid reservoir.
  • Page 515 Brake Wear Properly torqued wheel nuts are necessary to help prevent brake pulsation. When tires are rotated, Your vehicle has front disc brakes and could have inspect brake pads for wear and evenly tighten rear drum brakes or rear disc brakes. wheel nuts in the proper sequence to torque Disc brake pads have built-in wear indicators that specifications in Capacities and Specifications on...
  • Page 516: Battery

    Replacing Brake System Parts Warning: Battery posts, terminals, and related accessories contain lead and lead compounds, The braking system on a vehicle is complex. Its chemicals known to the State of California many parts have to be of top quality and work well to cause cancer and reproductive harm.
  • Page 517: Jump Starting

    Jump Starting Trying to start your vehicle by pushing or pulling it will not work, and it could damage If your vehicle’s battery (or batteries) has run your vehicle. down, you may want to use another vehicle and 1. Check the other vehicle. It must have a some jumper cables to start your vehicle.
  • Page 518 3. Get the vehicles close enough so the jumper Notice: If you leave your radio or other cables can reach, but be sure the vehicles are accessories on during the jump starting not touching each other. If they are, it could procedure, they could be damaged.
  • Page 519 5. Open the hoods and locate the positive (+) and negative (−) terminal locations of the CAUTION: other vehicle. Your vehicle has a remote positive (+) jump Using a match near a battery can cause starting terminal and a remote negative (−) battery gas to explode.
  • Page 520 Do not connect positive (+) to negative (−) or you will get a short that would damage CAUTION: the battery and maybe other parts too. And do not connect the negative (−) cable to the Fans or other moving engine parts can negative (−) terminal on the dead battery injure you badly.
  • Page 521 8. Do not let the other end touch metal. Connect 11. Connect the other it to the positive (+) terminal of the good end of the battery. Use a remote positive (+) terminal if negative (−) cable to the vehicle has one. the remote negative (−) 9.
  • Page 522 Notice: If the jumper cables are connected or To disconnect the jumper cables from both removed in the wrong order, electrical shorting vehicles do the following: may occur and damage the vehicle. The repairs 1. Disconnect the black negative (−) cable from would not be covered by your warranty.
  • Page 523: Rear Axle

    Rear Axle How to Check Lubricant When to Check Lubricant It is not necessary to regularly check rear axle fluid unless you suspect there is a leak or you hear an unusual noise. A fluid loss could indicate a problem. Have it inspected and repaired. All axle assemblies are filled by volume of fluid during production.
  • Page 524: Four-Wheel Drive

    • Transfer Case The proper level for the 2500HD with the 6.6L diesel engine (RPO LLY) or 8.1L V8 When to Check Lubricant engine (RPO L18), and 3500 Series is from It is not necessary to regularly check transfer case 0.6 to 0.8 inch (17 mm to 21 mm) below fluid unless you suspect there is a leak or you the bottom of the filler plug hole.
  • Page 525: Front Axle

    When to Change Lubricant Refer to the Maintenance Schedule to determine how often to change the lubricant. See Scheduled Maintenance (Gasoline Engine) on page 613. What to Use Refer to the Maintenance Schedule to determine what kind of lubricant to use. See Recommended Fluids and Lubricants on page 625.
  • Page 526 How to Check Lubricant If the level is below the bottom of the filler plug hole, located on the front axle, you may need to add some lubricant: • When the differential is cold, add enough lubricant to raise the level to 0 to 3/8 inch (9.5 mm) below the filler plug hole.
  • Page 527: Noise Control System

    Noise Control System Federal law prohibits the following acts or the causing thereof: 1. The removal or rendering inoperative by any Tampering with Noise Control person, other than for purposes of System Prohibited maintenance, repair or replacement, of any device or element of design incorporated into The following information relates to compliance any new vehicle for the purpose of noise with federal noise emission standards for vehicles...
  • Page 528: Bulb Replacement

    Engine: Bulb Replacement • Removal or rendering engine speed governor, For the proper type of replacement bulbs, see if the vehicle has one, inoperative so as to Replacement Bulbs on page 537. allow engine speed to exceed manufacturer For any bulb changing procedure not listed in this specifications.
  • Page 529: Headlamps

    Headlamps To replace a headlamp bulb, do the following: 1. Open the hood. See Hood Release on page 475 for more information. A. Low-Beam Headlamp B. High-Beam Headlamp 3. Pull the headlamp assembly out. 4. Unplug the electrical connector. 5. Turn the old bulb counterclockwise and remove it from the headlamp assembly.
  • Page 530: Front Turn Signal, Sidemarker And Daytime Running Lamps

    Front Turn Signal, Sidemarker and Daytime Running Lamps 3. Press the retainer clip (B), located behind the A. Sidemarker Lamp turn signal assembly, towards the outside of B. Retainer Clip the vehicle. C. Front Turn Signal Lamp 4. Pull the turn signal assembly out of the D.
  • Page 531: Roof Marker Lamps

    Roof Marker Lamps 6. Remove the old bulb from the bulb socket. 7. Install a new bulb into the bulb socket. To replace a roof marker lamp bulb, do the 8. Insert the bulb socket into the turn following: signal assembly and turn it clockwise 1.
  • Page 532 2. Install a new bulb To replace a center roof marker lamp bulb, do the into the socket and following: turn it clockwise until it locks into place. 3. Reinstall the lens and tighten the screws. 1. Remove the six screws from the center roof marker lamp assembly.
  • Page 533: Center High-Mounted Stoplamp (Chmsl) And Cargo Lamp

    Center High-Mounted Stoplamp (CHMSL) and Cargo Lamp To replace one of these bulbs, do the following: A. Cargo Lamp B. Center High-Mounted Stoplamp Bulb 1. Remove the screws and lift off the lamp assembly. 2. Remove the back plate from the assembly by pressing the release tabs.
  • Page 534: Pickup Box Identification And Fender Marker Lamps

    Pickup Box Identification and 4. If a CHMSL bulb is replaced, put the new bulb into the socket and press it in until it is tight. Fender Marker Lamps If a cargo lamp is replaced, put a new cargo lamp bulb into the socket and press it in To replace a pickup box identification or fender until it is tight before turning the socket marker lamp bulb, do the following:...
  • Page 535: Taillamps, Turn Signal, Stoplamps And Back-Up Lamps

    Taillamps, Turn Signal, Stoplamps 4. Press the release tab, if the vehicle has one, and turn the bulb socket counterclockwise to and Back-up Lamps remove it from the taillamp assembly. To replace one of these bulbs, do the following: 5. Pull the old bulb straight out from the socket. 1.
  • Page 536 Taillamps (Chassis Cab Models) A. Stoplamp/Taillamp B. Turn Signal Lamp A. Turn Signal Lamp C. Back-up Lamp B. Taillamp/Stoplamp D. Sidemarker Lamp C. Back-up Lamp To replace one of these bulbs, do the following: 1. Peel the rubber seal away from the lens. 2.
  • Page 537: License Plate Lamp

    License Plate Lamp Replacement Bulbs To replace one of these bulbs, do the following: Exterior Lamp Bulb Number 1. Reach under the rear bumper for the Back-up Lamp 3157 bulb socket. Back-up Lamp* 1156 Cargo Lamp and Center High-Mounted Stoplamp (CHMSL) Daytime Running Lamp (DRL) 4114K Fender Marker, Front Roof Marker,...
  • Page 538: Windshield Wiper Blade Replacement

    Windshield Wiper Blade To replace the windshield wiper blade assembly do the following: Replacement 1. Lift the wiper arm away from the windshield. Windshield wiper blades should be inspected for wear and cracking. See Scheduled Maintenance (Gasoline Engine) on page 613 for more information.
  • Page 539: Tires

    Tires CAUTION: (Continued) Your new vehicle comes with high-quality tires made by a leading tire manufacturer. If you ever • Underinflated tires pose the same have questions about your tire warranty and where danger as overloaded tires. The to obtain service, see your GM Warranty booklet resulting accident could cause serious for details.
  • Page 540: Tire Sidewall Labeling

    20-Inch Tires If your vehicle has the optional 20-inch P275/55R20 size tires, they are classified as touring tires and are designed for on road use. The low-profile, wide tread design is not recommended for “off-road” driving or commercial uses such as snow plowing.
  • Page 541 (B) TPC Spec (Tire Performance Criteria (E) Tire Ply Material: The type of cord and Specification): Original equipment tires designed number of plies in the sidewall and under to GM’s specific tire performance criteria have the tread. a TPC specification code molded onto the sidewall. (F) Uniform Tire Quality Grading (UTQG): Tire GM’s TPC specifications meet or exceed all manufacturers are required to grade tires...
  • Page 542 (B) TPC Spec (Tire Performance Criteria Specification): Original equipment tires designed to GM’s specific tire performance criteria have a TPC specification code molded onto the sidewall. GM’s TPC specifications meet or exceed all federal safety guidelines. (C) Dual Tire Maximum Load: Maximum load that can be carried and the maximum pressure needed to support that load when used in a dual configuration.
  • Page 543: Tire Size

    (F) Tire Ply Material: The type of cord and number of plies in the sidewall and under the tread. (G) Single Tire Maximum Load: Maximum load that can be carried and the maximum pressure needed to support that load when used as a single.
  • Page 544: Tire Terminology And Definitions

    Tire Terminology and Definitions (C) Aspect Ratio: A two-digit number that indicates the tire height-to-width measurements. For example, if the tire size aspect ratio is 75, as Air Pressure: The amount of air inside the tire shown in item C of the light truck (LT-Metric) tire pressing outward on each square inch of the illustration, it would mean that the tire’s sidewall is tire.
  • Page 545 Cold Tire Pressure: The amount of air pressure Intended Outboard Sidewall: The side of an in a tire, measured in pounds per square inch asymmetrical tire, that must always face outward (psi) or kilopascals (kPa) before a tire has built up when mounted on a vehicle.
  • Page 546 Occupant Distribution: Designated seating Speed Rating: An alphanumeric code assigned positions. to a tire indicating the maximum speed at which a tire can operate. Outward Facing Sidewall: The side of an asymmetrical tire that has a particular side that Traction: The friction between the tire and the faces outward when mounted on a vehicle.
  • Page 547: Inflation - Tire Pressure

    Vehicle Maximum Load on the Tire: Load on an If your tires have too much air (over-inflation), individual tire due to curb weight, accessory you can get the following: weight, occupant weight, and cargo weight. • Unusual wear Vehicle Placard: A label permanently attached to •...
  • Page 548: Dual Tire Operation

    How to Check Dual Tire Operation When the vehicle is new, or whenever a wheel, Use a good quality pocket-type gage to check tire wheel bolt or wheel nut is replaced, check the pressure. You cannot tell if your tires are wheel nut torque after 100, 1,000 and 6,000 miles properly inflated simply by looking at them.
  • Page 549: Tire Inspection And Rotation

    Tire Inspection and Rotation Tires should be rotated every 5,000 to 8,000 miles (8 000 to 13 000 km). Any time you notice unusual wear, rotate your tires as soon as possible and check wheel alignment. Also check for damaged tires or wheels. See When It Is Time for New Tires on page 551 and Wheel Replacement on page 556 for more information.
  • Page 550 If your vehicle has dual rear wheels and the tread design for the front tires is different from the dual rear tires, always use the correct rotation pattern shown here when rotating your tires. If your vehicle has dual rear wheels and the tread design for your front tires is the same as your rear tires, always use one of the correct rotation The dual tires are rotated as a pair, and the inside...
  • Page 551: When It Is Time For New Tires

    When It Is Time for New Tires CAUTION: One way to tell when it is time for new tires is Rust or dirt on a wheel, or on the parts to to check the treadwear which it is fastened, can make wheel nuts indicators, which will become loose after time.
  • Page 552: Buying New Tires

    Buying New Tires You need a new tire if any of the following statements are true: GM has developed and matched specific tires for • You can see the indicators at three or more your vehicle. The original equipment tires places around the tire.
  • Page 553 CAUTION: CAUTION: Mixing tires could cause you to lose If you use bias-ply tires on your vehicle, control while driving. If you mix tires of the wheel rim flanges could develop different sizes, brands, or types (radial cracks after many miles of driving. A tire and bias-belted tires), the vehicle may not and/or wheel could fail suddenly, causing handle properly, and you could have a...
  • Page 554: Different Size Tires And Wheels

    Different Size Tires and Wheels CAUTION: If you add wheels or tires that are a different size than your original equipment wheels and tires, this may affect the way your vehicle performs, If you add different sized wheels, your including its braking, ride and handling vehicle may not provide an acceptable characteristics, stability, and resistance to rollover.
  • Page 555: Uniform Tire Quality Grading

    Uniform Tire Quality Grading Treadwear The treadwear grade is a comparative rating Quality grades can be found where applicable on based on the wear rate of the tire when tested the tire sidewall between tread shoulder and under controlled conditions on a specified maximum section width.
  • Page 556: Wheel Alignment And Tire Balance

    Temperature – A, B, C Wheel Alignment and Tire Balance The temperature grades are A (the highest), B, The tires and wheels on your vehicle were aligned and C, representing the tire’s resistance to and balanced carefully at the factory to give you the the generation of heat and its ability to dissipate longest tire life and best overall performance.
  • Page 557 Each new wheel should have the same Notice: The wrong wheel can also cause load-carrying capacity, diameter, width, offset and problems with bearing life, brake cooling, be mounted the same way as the one it replaces. speedometer or odometer calibration, headlamp aim, bumper height, vehicle ground If you need to replace any of your wheels, wheel clearance, and tire or tire chain clearance...
  • Page 558: Tire Chains

    Used Replacement Wheels Tire Chains CAUTION: CAUTION: Putting a used wheel on your vehicle is If your vehicle has dual wheels or dangerous. You cannot know how it has P265/75R16, LT265/75R16, P265/70R17 or been used or how far it has been driven. It P275/55R20 size tires, do not use tire could fail suddenly and cause a crash.
  • Page 559: If A Tire Goes Flat

    Tighten them as tightly as possible with the CAUTION: (Continued) ends securely fastened. Drive slowly and follow the chain manufacturer’s instructions. If you can hear the chains contacting your vehicle, Use another type of traction device only if stop and retighten them. If the contact its manufacturer recommends it for use continues, slow down until it stops.
  • Page 560: Changing A Flat Tire

    Changing a Flat Tire A rear blowout, particularly on a curve, acts much like a skid and may require the same correction If a tire goes flat, avoid further tire and wheel you would use in a skid. In any rear blowout damage by driving slowly to a level place.
  • Page 561 CAUTION: (Continued) 3. If you have a four-wheel-drive vehicle, be sure the transfer case is in a drive gear – not in NEUTRAL. 4. Turn off the engine and do not restart while the vehicle is raised. 5. Do not allow passengers to remain in the vehicle.
  • Page 562: Removing The Spare Tire And Tools

    Removing the Spare Tire and Tools Regular Cab and Crew Cab (Except 1500 Crew Cab) A. Wing Nut Retaining D. Tool Kit and 1500 Crew Cab Wheel Blocks Jack Tools A. Knob D. Wing Nut Retaining B. Wheel Blocks E. Retaining Hook B.
  • Page 563 Extended Cab Extended Cab Short Box A. Wing Nut Retaining E. Knob A. Wing Nut Retaining E. Knob Wheel Blocks F. Tool Kit and Wheel Blocks F. Retaining Bracket B. Wheel Blocks Jack Tools B. Wheel Blocks and Wing Nut C.
  • Page 564 For regular cab models, the equipment you will need is behind the passenger’s seat. For extended and crew cab models, the equipment is on the shelf behind the passenger’s side second row seat. 1. If there is a cover, move the seats forward and turn the wing nut on the cover counterclockwise to remove it.
  • Page 565 1. Open the spare tire lock cover on the bumper 3. Insert the hoist end and use the ignition key to remove the lock, if (open end) (F) of the equipped with a spare tire lock (J). To extension through remove the spare tire lock, insert the key, turn the hole (G) in and pull straight out.
  • Page 566 4. Turn the wheel wrench (H) counterclockwise 6. Tilt the retainer at to lower the spare tire to the ground. Continue the end of the cable to turn the wheel wrench until the spare tire when the tire has can be pulled out from under the vehicle. been lowered, so it can be pulled If the spare tire does not lower to the ground,...
  • Page 567: Removing The Flat Tire And Installing The Spare Tire

    Removing the Flat Tire and 1. If your vehicle has wheel nut caps, Installing the Spare Tire loosen them by turning the wheel Use the following pictures and instructions to wrench remove the flat tire and raise the vehicle. counterclockwise. If the vehicle has a center cap with wheel nut caps, the wheel nut caps are designed to stay with the center cap after they are...
  • Page 568 If the wheel has a smooth center cap, place 2. Use the wheel wrench and turn it the chisel end of the wheel wrench in the counterclockwise to loosen the wheel slot on the wheel, and gently pry it out. nuts.
  • Page 569 If the flat tire is on the rear, position the jack under the rear axle between the spring anchor and the shock absorber bracket. If you have added a snow plow to the front of your vehicle, lower the snow plow fully before raising the vehicle.
  • Page 570 CAUTION: Raising your vehicle with the jack improperly positioned can damage the vehicle and even make the vehicle fall. To help avoid personal injury and vehicle damage, be sure to fit the jack lift head into the proper location before raising the vehicle.
  • Page 571 Rear Position – 2WD Pickup Models Rear Position – All Other Models 4. Make sure the jack head is positioned so that the rear axle is resting securely between the grooves that are on the jack head. 5. Turn the wheel wrench clockwise to raise the vehicle.
  • Page 572 6. Remove all the wheel nuts and take CAUTION: (Continued) off the flat tire. remove any rust or dirt from the places where the wheel attaches to the vehicle. In an emergency, a cloth or a paper towel can be used to do this; but be sure to use a scraper or wire brush later, if needed, to get all the rust or dirt off.
  • Page 573 CAUTION: Never use oil or grease on studs or nuts. Because the nuts might come loose. The vehicle’s wheel could fall off, causing a serious accident. 9. Put the wheel nuts back on with the rounded end of the nuts toward the wheel. 10.
  • Page 574 Front Position - 2WD 1500 Model Rear Position 11. Turn the wheel wrench counterclockwise to lower the vehicle. Lower the jack completely.
  • Page 575 CAUTION: Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to come loose and even come off. This could lead to an accident. Be sure to use the correct wheel nuts. If you have to replace them, be sure to get new GM original equipment wheel nuts.
  • Page 576: Secondary Latch System

    Secondary Latch System To release the spare tire from the secondary latch, do the following: Your vehicle has an underbody-mounted tire hoist assembly that has a secondary latch system. It is designed to stop the spare tire from suddenly falling off your vehicle. For the secondary latch to work, the spare must be installed with the valve stem pointing down.
  • Page 577 4. Repeat this procedure at least two times. If the spare tire lowers to the ground, continue with Step 5 of Removing the Spare Tire and Tools on page 562. 5. Turn the wrench counterclockwise until approximately 6 inches (15 cm) of cable is exposed.
  • Page 578 11. Continue raising the jack until the spare tire stops moving upward and is held firmly in place. The secondary latch has released and the spare tire is balancing on the jack. 12. Lower the jack by turning the wheel wrench counterclockwise.
  • Page 579 14. Use one hand to push against the spare while 16. Turn the wheel wrench clockwise to raise the firmly pulling the jack out from under the cable back up if the cable is hanging under spare tire with the other hand. the vehicle.
  • Page 580: Storing A Flat Or Spare Tire And Tools

    Storing a Flat or Spare Tire Use the following art and text to assist you: and Tools CAUTION: Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone.
  • Page 581 1. Put the tire on the ground at the rear of the vehicle with the valve stem pointed down, and to the rear. 2. Tilt the retainer (D) downward and through the wheel opening. Make sure the retainer is fully seated across the underside of the wheel.
  • Page 582 4. Insert the hoist end (F) through the hole (G) in the rear bumper. Be sure the hoist end of the extension (F) connects to the hoist shaft (E). The ribbed square end of the extension is used to lower the spare tire.
  • Page 583 To store the jack and jack tools, do the following: 1. Put the tools (D) in the tool bag (E) and place them in the retaining bracket (C). 2. Tighten down the wing nut (C). 3. Assemble the wheel blocks (B) and jack (G) together with the wing nut (A) and retaining hook (H).
  • Page 584: Spare Tire

    Spare Tire Your vehicle may have a different size spare tire than the road tires originally installed on your Your vehicle, when new, had a fully-inflated spare vehicle. This spare tire was developed for use on tire. A spare tire may lose air over time, so check its your vehicle, so it is all right to drive on it.
  • Page 585: Appearance Care

    Appearance Care from using cleaners on surfaces for which they were not intended. Use glass cleaner only on glass. Remove any accidental over-spray from other Cleaning the Inside of Your Vehicle surfaces immediately. To prevent over-spray, apply cleaner directly to the cleaning cloth. Your vehicle’s interior will continue to look its best if it is cleaned often.
  • Page 586: Fabric/Carpet

    Fabric/Carpet Do not clean your vehicle using the following cleaners or techniques: Use a vacuum cleaner with a soft brush • Never use a knife or any other sharp object to attachment frequently to remove dust and loose remove a soil from any interior surface. dirt.
  • Page 587: Leather

    4. Continue to gently rub the soiled area until the and protect leather may permanently change the cleaning cloth remains clean. appearance and feel of your leather and are not recommended. Do not use silicone or 5. If the soil is not completely removed, use a wax-based products, or those containing organic mild soap solution and repeat the cleaning solvents to clean your vehicle’s interior because...
  • Page 588: Care Of Safety Belts

    Weatherstrips Some commercial products may increase gloss on your instrument panel. The increase in gloss Silicone grease on weatherstrips will make them may cause annoying reflections in the windshield last longer, seal better, and not stick or squeak. and even make it difficult to see through the Apply silicone grease with a clean cloth.
  • Page 589: Cleaning Exterior Lamps/Lenses

    Dry the finish with a soft, clean chamois or an Notice: Machine compounding or aggressive all-cotton towel to avoid surface scratches polishing on a basecoat/clearcoat paint and water spotting. finish may damage it. Use only non-abrasive waxes and polishes that are made for a High pressure car washes may cause water to basecoat/clearcoat paint finish on your vehicle.
  • Page 590: Windshield And Wiper Blades

    Aluminum or Chrome-Plated Wheels Use special care with aluminum trim. To avoid damaging protective trim, never use auto or and Trim chrome polish, steam or caustic soap to clean aluminum. A coating of wax, rubbed to high polish, Your vehicle may have either aluminum or is recommended for all bright metal parts.
  • Page 591: Tires

    Tires The surface of these wheels is similar to the painted surface of your vehicle. Do not use strong To clean the tires, use a stiff brush with tire cleaner. soaps, chemicals, abrasive polishes, abrasive cleaners, cleaners with acid, or abrasive cleaning Notice: Using petroleum-based tire dressing brushes on them because you could damage products on your vehicle may damage the...
  • Page 592: Finish Damage

    Finish Damage Chemical Paint Spotting Any stone chips, fractures or deep scratches in Some weather and atmospheric conditions can the finish should be repaired right away. Bare create a chemical fallout. Airborne pollutants can metal will corrode quickly and may develop into fall upon and attack painted surfaces on the major repair expense.
  • Page 593: Vehicle Care/Appearance Materials

    Vehicle Care/Appearance Materials Description Usage Removes swirl marks, fine Description Usage Swirl Remover Polish scratches, and other light surface contamination. Polishing Cloth Interior and exterior Wax-Treated polishing cloth. Removes light scratches Cleaner Wax and protects finish. Tar and Road Removes tar, road oil, Oil Remover and asphalt.
  • Page 594: Vehicle Identification

    Vehicle Identification Engine Identification The eighth character in the VIN is the engine code. This code helps you identify your vehicle’s Vehicle Identification Number (VIN) engine, specifications, and replacement parts. Service Parts Identification Label This label is on the inside of the glove box. It is very helpful if you ever need to order parts.
  • Page 595: Electrical System

    Electrical System Windshield Wiper Fuses The windshield wiper motor is protected by an Add-On Electrical Equipment internal circuit breaker and a fuse. If the motor overheats due to heavy snow, etc., the wiper will Notice: Do not add anything electrical to your stop until the motor cools.
  • Page 596: Fuses And Circuit Breakers

    Fuses and Circuit Breakers Instrument Panel Fuse Block The wiring circuits in your vehicle are protected The fuse block access from short circuits by a combination of fuses, door is on the driver’s circuit breakers and fusible thermal links. side edge of the This greatly reduces the chance of fires caused by instrument panel.
  • Page 597 Fuses Usage Four-Wheel Drive System, Auxiliary Battery HTR A/C Climate Control System Power Door Lock Relay LOCK (Relay) (Lock Function) HVAC 1 Climate Control System Driver’s Door Harness LT DR Connection Cruise Control, Power Take CRUISE Off (PTO) Power Door Lock Relay UNLCK (Relay) (Unlock Function) RR FOG LP...
  • Page 598: Center Instrument Panel Fuse Block

    Center Instrument Panel Fuse Block Fuses Usage Left Turn Signals and The center instrument panel utility block is LT TRN Sidemarkers located underneath the instrument panel, to the left of the steering column. Vehicle Stoplamps, Brake VEH STOP Module, Electronic Throttle Control Module RT TRLR ST/TRN Right Turn Signal/Stop Trailer...
  • Page 599: Underhood Fuse Block

    Underhood Fuse Block Device Usage HDLR 2 Headliner Wiring Connector BODY Body Wiring Connector DEFOG Rear Defogger Relay HDLNR 1 Headliner Wiring Connector 1 SPARE RELAY Not Used Driver and Passenger Seat CB SEAT Module Circuit Breaker Right Power Windows Circuit CB RT DOOR Breaker SPARE...
  • Page 601 1* Fuel Injection Rail #2-Gasoline Engine; Engine Fuses Usage Control Module-Diesel Engine. Diesel Glow Plugs and Intake GLOW PLUG Air Heater 2* Fuel Injection Rail #1-Gasoline Engine; CUST FEED Gasoline Accessory Power Actuator-Diesel Engine. HYBRID Hybrid 3* Oxygen Sensors-Gasoline Engine; Fuel Auxiliary Power (Single Heater-Diesel Engine.
  • Page 602 Fuses Usage Fuses Usage Left Bussed Electrical Center, Instrument Panel Cluster, Air LBEC 1 Left Doors, Truck Body Conditioning Relay, Turn IGN E Controller, Flasher Module Signal/Hazard Switch, Starter Relay TRL PARK Parking Lamps Trailer Wiring Ride Control Right Rear Parking and RR PARK Sidemarker Lamps TRL B/U...
  • Page 603 Fuses Usage Fuses Usage LH HID Not Used LO HDLP-LT Headlamp Low Beam-Left Daytime Running Lamps Brake Transmission Shift BTSI Interlock System Regulated Voltage Control CRNK Starting System Instrument Panel IPC/DIC Cluster/Driver Information LO HDLP-RT Headlamp Low Beam-Right Center FOG LP Fog Lamps Relay HVAC/ECAS Climate Control Controller...
  • Page 604 Auxiliary Electric Cooling Fan Fuses Usage Fuse Block COOL/FAN Cooling Fan COOL/FAN Cooling Fan Relay Fuse The auxiliary electric COOL/FAN Cooling Fan Fuse cooling fan fuse block is located in the engine Relays Usage compartment on COOL/FAN 1 Cooling Fan Relay 1 the driver’s side of the COOL/FAN 3 Cooling Fan Relay 3...
  • Page 605: Capacities And Specifications

    Capacities and Specifications The following approximate capacities are given in English and metric conversions. See Recommended Fluids and Lubricants on page 625 for more information. Capacities Application English Metric For the air conditioning system refrigerant charge amount, see the refrigerant caution label located Air Conditioning Refrigerant R134a under the hood.
  • Page 606 Capacities Application English Metric 8.1L V8 Automatic* 26.9 qt 25.5 L 8.1L V8 Manual* 27.1 qt 25.6 L * Engine Fan Driven cooling system ** Electric Cooling Fan system Transmission Automatic Four Speed 4L80-E 7.7 qt 7.3 L Automatic Four Speed 4L60-E and 4L70–E 5.0 qt 4.7 L Automatic Six Speed Allison...
  • Page 607 Capacities Application English Metric Transfer Case Fluid 2.0 qt 1.9 L Wheel Nut Torque 140 ft lb 190 Y After refill, the level must be rechecked. Add enough engine coolant so that the fluid is within the proper operating range. Engine Specifications Engine VIN Code...
  • Page 608 ✍ NOTES...
  • Page 609: Maintenance Schedule

    Section 6 Maintenance Schedule Maintenance Schedule ........ 610 At the First 100, 1,000 and 6,000 Miles Introduction ..........610 (160, 1 600 and 10 000 km) ....621 Maintenance Requirements ......610 At Each Fuel Fill ........622 Your Vehicle and the Environment .... 611 At Least Once a Month ......
  • Page 610: Maintenance Schedule

    Maintenance Schedule Maintenance Requirements Notice: Maintenance intervals, checks, Introduction inspections, replacement parts, and recommended fluids and lubricants as This maintenance section applies to vehicles with prescribed in this manual are necessary to a gasoline engine. If your vehicle has a diesel keep your vehicle in good working condition.
  • Page 611: Your Vehicle And The Environment

    Your Vehicle and the Environment Using the Maintenance Schedule Proper vehicle maintenance not only helps to keep We at General Motors want to help you keep your your vehicle in good working condition, but also vehicle in good working condition. But we do helps the environment.
  • Page 612 This schedule is for vehicles that: • CAUTION: carry passengers and cargo within recommended limits. You will find these limits on the Tire and Loading Information label. Performing maintenance work on a See Loading Your Vehicle on page 403. vehicle can be dangerous. In trying to do •...
  • Page 613: Scheduled Maintenance (Gasoline Engine)

    Scheduled Maintenance If you want to purchase service information, see Service Publications Ordering Information on (Gasoline Engine) page 652. This maintenance section applies to vehicles with Owner Checks and Services on page 621 tells you a gasoline engine. If your vehicle has a diesel what should be checked, when to check it, and engine, see the maintenance schedule section in what you can easily do to help keep your vehicle in...
  • Page 614 If the engine oil life system is ever reset Maintenance I — Use Maintenance I if the accidentally, you must service your vehicle within CHANGE ENGINE OIL message comes on within 3,000 miles (5 000 km) since your last service. 10 months since the vehicle was purchased or Remember to reset the oil life system whenever the Maintenance II was performed.
  • Page 615 Scheduled Maintenance Service Maintenance I Maintenance II Change engine oil and filter. See Engine Oil (Gasoline Engine) on page 482. • • Reset oil life system. See Engine Oil Life System (Gasoline Engine) on page 485. An Emission Control Service. ®...
  • Page 616 Scheduled Maintenance (cont’d) Service Maintenance I Maintenance II Perform any needed additional services. See “Additional Required Services” in • • this section. • Inspect suspension and steering components. See footnote (b). • Inspect engine cooling system. See footnote (c). • Inspect wiper blades.
  • Page 617: Additional Required Services (Gasoline Engine)

    Additional Required Services (Gasoline Engine) This maintenance section applies to vehicles with a gasoline engine. If your vehicle has a diesel engine, ® see the maintenance schedule section in the DURAMAX Diesel Engine Supplement. The following services should be performed at the first maintenance service (I or II) after the indicated miles (kilometers) shown for each item.
  • Page 618 Additional Required Services (cont’d) 25,000 50,000 75,000 100,000 125,000 150,000 Service and Miles (Kilometers) (40 000) (80 000) (120 000) (160 000) (200 000) (240 000) ® Except Allison Transmission : Change • • • automatic transmission fluid and filter (severe service).
  • Page 619: Maintenance Footnotes (Gasoline Engine)

    Maintenance Footnotes (Gasoline (a) Visually inspect brake lines and hoses for proper hook-up, binding, leaks, cracks, chafing, Engine) etc. Inspect disc brake pads for wear and rotors for surface condition. Inspect drum brake This maintenance section applies to vehicles with linings/shoes for wear or cracks.
  • Page 620 (e) Make sure the safety belt reminder light and all (h) Change automatic transmission fluid and filter your belts, buckles, latch plates, retractors, and if the vehicle Gross Vehicle Weight Rating anchorages are working properly. Look for (GVWR) is over 8600 lbs or if the vehicle is mainly any other loose or damaged safety belt system driven under one or more of these conditions: parts.
  • Page 621: Owner Checks And Services

    (k) Inspect system. Check all fuel and vapor lines (q) Visually inspect belt for fraying, excessive and hoses for proper hook-up, routing, and cracks, or obvious damage. Replace belt if condition. Check that the purge valve, if the vehicle necessary. has one, works properly.
  • Page 622: At Each Fuel Fill

    At Each Fuel Fill At Least Once a Month It is important to perform these underhood checks Tire Inflation Check at each fuel fill. Visually inspect your vehicle’s tires and make sure Engine Oil Level Check they are inflated to the correct pressures. Do not forget to check the spare tire.
  • Page 623: At Least Once A Year

    At Least Once a Year Automatic Transmission Shift Lock Control System Check Starter Switch Check CAUTION: CAUTION: When you are doing this inspection, the When you are doing this inspection, the vehicle could move suddenly. If the vehicle could move suddenly. If the vehicle moves, you or others could be vehicle moves, you or others could be injured.
  • Page 624 Ignition Transmission Lock Check Parking Brake and Automatic Transmission Park (P) Mechanism Check While parked, and with the parking brake set, try to turn the ignition to LOCK in each shift lever position. CAUTION: • The ignition should turn to LOCK only when the shift lever is in PARK (P).
  • Page 625: Recommended Fluids And Lubricants

    Recommended Fluids and Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular Lubricants brake, set the parking brake. • To check the parking brake’s holding ability: This maintenance section applies to vehicles with a gasoline engine.
  • Page 626 Usage Fluid/Lubricant Usage Fluid/Lubricant ® ® Hydraulic Brake Delco Supreme 11 Brake Fluid or Automatic DEXRON -VI Automatic System equivalent DOT-3 brake fluid. Transmission Transmission Fluid. Windshield Multi-Purpose Lubricant, Superlube ® GM Optikleen Washer Solvent. Key Lock Washer (GM Part No. U.S. 12346241, in Cylinders Canada 10953474).
  • Page 627 Usage Fluid/Lubricant Usage Fluid/Lubricant SAE 75W-90 Synthetic Multi-Purpose Lubricant, Superlube Axle Lubricant (GM Part Hood Hinges (GM Part No. U.S. 12346241, in Rear Axle No. U.S. 12378261, in Canada 10953474). Canada 10953455) meeting GM Body Door Specification 9986115. Hinge Pins, Manual Transmission Fluid Tailgate Hinge Multi-Purpose Lubricant, Superlube...
  • Page 628: Normal Maintenance Replacement Parts (Gasoline Engines)

    Normal Maintenance Replacement Parts (Gasoline Engines) Replacement parts identified below by name, part number, or specification can be obtained from your GM dealer. ® If your vehicle has a diesel engine see the maintenance schedule section in the DURAMAX Diesel Engine Supplement.
  • Page 629: Engine Drive Belt Routing

    Engine Drive Belt Routing V8 Engines (A) Air Conditioning Compressor V6 Engines...
  • Page 630: Maintenance Record

    Maintenance Record After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. See Maintenance Requirements on page 610. Any additional information from Owner Checks and Services on page 621 can be added on the following record pages.
  • Page 631 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II...
  • Page 632 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II...
  • Page 633: Customer Assistance Information

    Section 7 Customer Assistance Information Customer Assistance and Information ..634 Reporting Safety Defects ......651 Customer Satisfaction Procedure ....634 Reporting Safety Defects to the Online Owner Center ......... 637 United States Government ..... 651 Customer Assistance for Text Reporting Safety Defects to the Telephone (TTY) Users ......
  • Page 634: Customer Assistance And Information

    Customer Assistance prompt). In Canada, contact Your satisfaction and goodwill are important General Motors of Canada Customer to your dealer/retailer and to GMC. Normally, any Communication by calling 1-800-263-3777 concerns with the sales transaction or the operation of the vehicle will be resolved by your (English) or 1-800-263-7854 (French).
  • Page 635 When contacting GMC, please remember that You may contact the BBB Auto Line Program your concern will likely be resolved at a using the toll-free telephone number or write them dealer’s/retailer’s facility. That is why we suggest at the following address: you follow Step One first if you have a concern.
  • Page 636 STEP THREE — Canadian Owners: In the event For further information concerning eligibility in the that you do not feel your concerns have been Canadian Motor Vehicle Arbitration Plan addressed after following the procedure outlined in (CAMVAP), call toll-free 1-800-207-0685. Steps 1 and 2, General Motors of Canada Alternatively, you can call the General Motors Limited wants you to be aware of its participation...
  • Page 637: Online Owner Center

    Online Owner Center My GM Canada (Canada only) My GM Canada is a password-protected section Online Owner Center of gmcanada.com where you can save information (United States only) on GM vehicles, get personalized offers, and use handy tools and forms with greater ease. The Owner Center is a resource for your GM ownership needs.
  • Page 638: Customer Assistance For Text

    GMC encourages customers to call the toll-free Customer Communication Centre, CA1-163-005 number for assistance. However, if a customer 1908 Colonel Sam Drive wishes to write or e-mail GMC, the letter should be Oshawa, Ontario L1H 8P7 addressed to: www.gmcanada.com 1-800-263-3777 (English)
  • Page 639: Gm Mobility Reimbursement Program

    All Overseas Locations GM Mobility Reimbursement Program Please contact the local General Motors Business Unit. Mexico, Central America and Caribbean Islands/Countries (Except Puerto Rico and U.S. Virgin Islands) General Motors de Mexico, S. de R.L. de C.V. Customer Assistance Center Paseo de la Reforma # 2740 This program, available to qualified applicants, can Col.
  • Page 640: Roadside Assistance Program

    (approximately $5 in the U.S. and 10 litres As the owner of a new GMC vehicle, you are in Canada). Service to provide diesel may be automatically enrolled in the GMC Roadside restricted.
  • Page 641 • Additional Services for Canadian Emergency Tow From a Public Roadway or Highway: Tow to the nearest Customers dealership/retailer for warranty service or in • Trip Routing Service: Upon request, the event of a vehicle-disabling accident. Roadside Assistance will send you detailed, Winch-out assistance when the vehicle computer- personalized maps, highlighting is mired in sand, mud, or snow.
  • Page 642 Remember, we are you to secure local emergency road service, only a phone call away. U.S. customers call GMC and you will be reimbursed up to $100 upon Roadside Assistance: 1-800-462-8782, text submission of the original receipt to telephone (TTY) users, call 1-888-889-2438.
  • Page 643: Courtesy Transportation

    Courtesy Transportation GMC and General Motors of Canada Limited reserve the right to limit services or reimbursement To enhance your ownership experience, we and to an owner or driver when, in their sole our participating dealers/retailers are proud to offer...
  • Page 644 Scheduling Service Appointments Depending on the circumstances, your dealer/retailer can offer you one of the following: When your vehicle requires warranty service, Shuttle Service contact your dealer/retailer and request an appointment. By scheduling a service appointment Shuttle service is the preferred means of offering and advising your service consultant of your Courtesy Transportation and participating transportation needs, your dealer/retailer can help...
  • Page 645 Courtesy Rental Vehicle Additional Program Information Your dealer/retailer may arrange to provide you All program options, such as shuttle service, may with a courtesy rental vehicle or reimburse you for not be available at every dealer/retailer. Please a rental vehicle that you obtain if your vehicle is contact your dealer/retailer for specific information kept for an overnight warranty repair.
  • Page 646: Vehicle Data Collection And Event Data Recorders

    Vehicle Data Collection and Event vehicle speed, safety belt usage, airbag readiness, airbag performance, and the Data Recorders severity of a collision. This information has been used to improve vehicle crash Your vehicle, like other modern motor vehicles, performance and may be used to improve has a number of sophisticated computer crash performance of future vehicles and systems that monitor and control several...
  • Page 647: Collision Damage Repair

    Collision Parts In addition, once GM collects or receives data, GM may: Genuine GM Collision parts are new parts made • use the data for GM research needs, with the same materials and construction methods • make it available for research where as the parts with which your vehicle was appropriate confidentiality is to be originally built.
  • Page 648 Insuring Your Vehicle Aftermarket collision parts are also available. These are made by companies other than GM and Protect your investment in your GM vehicle with may not have been tested for your vehicle. As a comprehensive and collision insurance coverage. result, these parts may fit poorly, exhibit premature There are significant differences in the quality durability/corrosion problems, and may not...
  • Page 649 If an Accident Occurs • If you need roadside assistance, call GM Roadside Assistance. See Roadside Here is what to do if you are involved in an Assistance Program on page 640 for more accident. information. • Try to relax and then check to make sure you •...
  • Page 650 • Managing the Vehicle Damage Repair If possible, call your insurance company from the scene of the accident. They will walk you Process through the information they will need. If In the event that your vehicle requires damage they ask for a police report, phone or go to repairs, GM recommends that you take an active the police department headquarters the role in its repair.
  • Page 651: Reporting Safety Defects

    If another party’s insurance company is paying for To contact NHTSA, you may call the Vehicle the repairs, you are not obligated to accept a Safety Hotline toll-free at 1-888-327-4236 (TTY: repair valuation based on that insurance 1-800-424-9153); go to http://www.safercar.gov; or company’s collision policy repair limits, as you write to: have no contractual limits with that company.
  • Page 652: Reporting Safety Defects To General Motors

    Canada) in a situation like this, we certainly hope specifications for GM transmissions, transaxles, you will notify us. Please call us at and transfer cases. 1-800-GMC-8782 (1-800-462-8782), or write: Service Bulletins GMC Customer Assistance Center P.O. Box 33172 Service Bulletins give technical service information...
  • Page 653 Owner Information ORDER TOLL FREE: 1-800-551-4123 Monday-Friday 8:00 AM - 6:00 PM Owner publications are written specifically for Eastern Time owners and intended to provide basic operational information about the vehicle. The owner For Credit Card Orders Only manual includes the Maintenance Schedule for (VISA-MasterCard-Discover), visit Helm, Inc.
  • Page 654 ✍ NOTES...
  • Page 655 Airbag Systems (cont.) Passenger Sensing System ....... 99 Accessories and Modifications ..... 464 Servicing Your Airbag-Equipped Vehicle ..104 Adding a Snow Plow or Similar Equipment ..410 What Makes an Airbag Inflate? ....93 Adding Equipment to Your AM-FM Radio ..........288 Airbag-Equipped Vehicle ......
  • Page 656 Appearance Care (cont.) Automatic Transmission Vehicle Care/Appearance Materials ..593 Fluid ..........490, 493 Washing Your Vehicle ......588 Operation ..........138 Weatherstrips ........... 588 Auxiliary Roof Mounted Lamp Switch ..224 Windshield and Wiper Blades ....590 Ashtray ............227 Audio System ..........
  • Page 657 Bulb Replacement (cont.) Center High-Mounted Stoplamp Pickup Box Identification and Fender (CHMSL) and Cargo Lamp ...... 533 Marker Lamps ........534 Chains, Tire ..........558 Replacement Bulbs ........537 Check Roof Marker Lamps ......... 531 Engine Light ..........256 Taillamps, Turn Signal, Stoplamps and Checking Things Under the Hood ....
  • Page 658 Cleaning (cont.) Coolant Inside of Your Vehicle ......585 Engine Temperature Gage ......254 Instrument Panel, Vinyl, and Other Heater, Engine ......... 136 Plastic Surfaces ........587 Surge Tank Pressure Cap ......501 Leather ............ 587 Cooling System ........... 504 Tires ............
  • Page 659 Driving (cont.) Hill and Mountain Roads ......394 Daytime Running Lamps ......221 In Rain and on Wet Roads ...... 386 Defensive Driving ........350 Off-Road ..........366 Delayed Locking .......... 118 Recovery Hooks ........402 Doing Your Own Service Work ....465 Rocking Your Vehicle to Get it Out ..
  • Page 660 Engine (cont.) Flat Tire ............559 Coolant ............ 498 Flat Tire, Changing ........560 Coolant Heater ......... 136 Flat Tire, Storing ......... 580 Coolant Temperature Gage ...... 254 Fluid Drive Belt Routing ........629 Automatic Transmission ....490, 493 Engine Compartment Overview ....476 Manual Transmission ........
  • Page 661 Fuses Center Instrument Panel Fuse Block ..598 Hazard Warning Flashers ......212 Fuses and Circuit Breakers ...... 596 Head Restraints ..........18 Instrument Panel Fuse Block ....596 Headlamps ......... 220, 529 Underhood Fuse Block ......599 Bulb Replacement ........528 Windshield Wiper ........
  • Page 662 Horn ............213 How to Use This Manual ........ 4 Labeling, Tire Sidewall ......... 540 How to Wear Safety Belts Properly ....27 Lamps Hydraulic Clutch .......... 497 Auxiliary Roof Mounted Lamp ....224 Cargo ............226 Dome ............224 Dome Lamp Override .......
  • Page 663 Light (cont.) Safety Belt Reminder ....... 245 Maintenance Schedule Security ........... 260 Additional Required Services ....617 Tow/Haul Mode ........261 At Each Fuel Fill ........622 Traction Off ..........253 At Least Once a Month ......622 Up-Shift ........... 251 At Least Once a Year ......
  • Page 664 Manual Transmission Fluid ............496 New Vehicle Break-In ........131 Operation ..........147 Noise Control System, Tampering ....527 Manual Windows ......... 125 Normal Maintenance Replacement Parts ..628 Memory Seat and Mirrors ......12 Message DIC Warnings and Messages ....267 Mirrors Odometer ............
  • Page 665 Outlets Passenger Airbag Status Indicator ....248 Accessory Power ........226 Passenger Sensing System ......99 Outside Passing ............363 ® Automatic Dimming Mirror ......185 Passlock ............ 130 Convex Mirror .......... 185 Pickup Conversion to Chassis Cab ....417 Curb View Assist Mirrors ......
  • Page 666 Radios (cont.) Rearview Mirrors ......... 175 Care of Your CDs and DVDs ....347 Reclining Seatbacks ........15 Radio with Cassette and CD ....300 Recommended Fluids and Lubricants ..625 Radio with CD ......... 291 Recovery Hooks .......... 402 Radio with Six-Disc CD ......
  • Page 667 Routing, Engine Drive Belt ......629 Seats (cont.) Running the Engine While Parked ....174 Memory, Mirrors ......... 12 Power Lumbar ........... 11 Power Seats ..........10 Rear Seat Operation ......19, 20 Reclining Seatbacks ........15 Safety Belt Seatback Latches ........18 Reminder Light ........
  • Page 668 Snow Plow ..........410 Taillamps Spare Tire ........... 584 Turn Signal, Stoplamps and Back-up Installing ..........567 Lamps ..........535 Removing ..........562 Theft-Deterrent, Radio ......... 343 Storing ............. 580 Theft-Deterrent Systems ......128 Specifications, Capacities ......605 Content Theft-Deterrent ......128 ®...
  • Page 669 Tires (cont.) Transmission (cont.) Secondary Latch System ......576 Temperature Gage ........254 Spare Tire ..........584 Up-Shift Light ........... 251 Storing a Flat or Spare Tire and Tools ..580 Transmission Operation, Automatic ....138 Tire Sidewall Labeling ......540 Transmission Operation, Manual ....
  • Page 670 Vehicle Customization, DIC ......279 Where to Put the Restraint ......56 Vehicle Data Collection and Event Data Windows ............. 125 Recorders ..........646 Manual ............. 125 Vehicle Identification Power ............126 Number (VIN) .......... 594 Sliding Rear ..........128 Service Parts Identification Label ....

Table of Contents