Securing A Child Restraint In A; Rear Seat Position - GMC Yukon 2007 Owner's Manual

3. Push and pull the child restraint in different
directions to be sure it is secure.
If the position you are
using has an adjustable
head rest/restraint
and you are using a
single tether, raise the
head rest/restraint
and route the tether
under the head
rest/restraint and in
between the head
rest/restraint posts.

Securing a Child Restraint in a

Rear Seat Position

If your child restraint has the LATCH system,
see Lower Anchors and Tethers for Children
(LATCH) on page 76.
If your vehicle has a third row, there is no top
tether anchor in the passenger-side seating
position. Do not secure a child restraint in this
position if a national or local law requires that the
top tether be anchored or if the instructions
that come with the child restraint say that the top
tether must be anchored.
If your child restraint does not have the LATCH
system, you will be using the lap-shoulder belt
to secure the child restraint in this position.
85