License Plate Lamp; Replacement Bulbs - GMC Yukon 2007 Owner's Manual

License Plate Lamp

1. Remove the two screws holding each of the
license plate lamps to the molding that is part
of the liftgate.
2. Twist and pull the license plate lamp forward
through the molding opening.
508
3. Turn the bulb socket counterclockwise and
pull the bulb straight out of the socket.
4. Install the new bulb.
5. Reverse Steps 1 through 3 to reinstall the
license plate lamp.

Replacement Bulbs

Exterior Lamp
Back-up Lamp
License Plate Lamp
Rear Turn Signal Lamp, Taillamp,
and Stoplamp
For replacement bulbs not listed here, contact
your dealer/retailer.
Bulb Number
7441
168
3057KX