Cargo Cover - GMC Yukon 2007 Owner's Manual

Cargo Cover

CAUTION:
{
An improperly stored cargo cover could be
thrown about the vehicle during a collision
or sudden maneuver. You or others could
be injured. If you remove the cover, always
store it in the proper storage location.
When you put it back, always be sure that it
is securely reattached.
If your vehicle has a cargo cover, you can use it
to cover items in the cargo area of your vehicle.
To use the cover, do the following:
1. Pull the cover handle toward the rear of the
vehicle.
2. Latch the cover posts into the retaining
sockets on the cargo area trim panels.
To return the cover to the retracted position, do
the following:
1. Pull up on the cover handle to release the
cover posts from the retaining sockets.
2. Let the cover move forward to the full retracted
position.
To remove the cover, from a regular wheelbase
model, do the following:
1. Let the cover go all the way into the holder.
2. Then, grasping the driver's side cover
end cap, push the cover end cap toward the
passenger's side of the vehicle.
3. Swing the cover rearward and take it out of
the vehicle.
To put the cover in the vehicle, do the following:
1. Make sure the cover slot in the holder faces
rearward with the round surface facing down.
2. Then, hold the cover at an angle and place
the cover end cap into the slot in the
passenger's side trim panel.
3. Move the other end of the cover forward and
hold it next to the driver's side trim panel slot.
193