Table of Contents
Advertisement
Installing the Captivator Pro/TV card
Warning: Always switch off your computer before removing the
cover and observe the warnings specified in its documentation.
1. Exit Windows and switch off your computer, monitor and any
2. Remove the cover from your computer. Refer to the computer
3. Touch the bare metal chassis of your computer to discharge
4. Locate an empty 16-bit expansion slot, preferably next to
If you are using Captivator ProTV and you intend to connect a
TV input to the TV tuner, install it next to your graphics card but
as far away as possible from the other cards in your PC. All PCs
and cards generate radio frequency (RF) noise and this noise can
affect the quality of your TV picture.
VM-Channel enabled graphics
card (e.g. 928Movie)
other peripheral devices, such as printers, connected to your
computer. Leave your computer power cable connected to the
outlet so that it is grounded.
documentation if you are not sure how to do this.
any static electricity.
your VM-Channel enabled graphics card. Remove the slot
cover and keep the screw.
VM-Channel connector
16-bit ISA bus slot
Installing Captivator Pro/TV
Expansion slot cover
8-bit ISA bus slot
Contents 15
Advertisement
Table of Contents
