Running The Setup Program - VideoLogic CaptivatorPro User Manual

Running the Setup program

Do not install the Captivator Pro/TV card before you run Setup.
If Captivator Pro/TV is installed first, Setup will not be able to
scan your system for free base address and interrupt settings.
Setup must be run from Windows. Before running Setup, close
any other applications that you have running as you will need to
switch off your computer after you have installed the software to
fit the Captivator Pro/TV card.
Follow these instructions carefully. We assume that you are using
drive A: as your default floppy drive. Substitute the correct drive
letter for your computer if necessary.
You can stop Setup by choosing the Exit button in a dialog box.
Press
any of the options.
1. Start Windows.
2. Insert the Captivator Pro/TV Setup disk into drive A: of your
3. Choose Run from the File menu in Program Manager.
4. At the command line type a:\setup. Choose OK.
5. Setup checks that your system meets or exceeds the minimum
6. The Installation Mode dialog box is displayed.
or use the Help button if you need further information on
F 1
computer.
requirements and then displays the Welcome dialog box.
Choose Continue.
Choose Express or Custom depending on your requirements.
Follow the instructions in the dialog boxes.
Installing Captivator Pro/TV Contents 13