Changing Captivator Pro/Tv's Hardware Settings; How To Change Captivator Pro/Tv's Base Address Or Interrupt Setting - VideoLogic CaptivatorPro User Manual

Changing Captivator Pro/TV's hardware settings

This section explains how to reconfigure Captivator Pro/TV's
base address and interrupt settings. Read this section if your
computer does not boot, Windows does not start, the
Captivator Pro/TV software is behaving in an unpredictable way,
or if you have installed another card which appears to conflict
with your Captivator Pro/TV.
Base address and interrupt clashes are two of the most common
problems that occur when installing cards. The symptoms for
each vary from one system to another, but typically:
• If you have just installed Captivator Pro/TV and your
• If you have just installed the Captivator Pro/TV software and

How to change Captivator Pro/TV's base address or interrupt setting

You can change Captivator Pro/TV's hardware settings using the
Captivator Pro/TV Configuration dialog box, which can be run
directly from the Windows Control Panel. The following steps
explain how to change Captivator Pro/TV's base address or
interrupt setting.
To prevent data-loss, we recommend that you quit any other
applications before changing base address or interrupt settings.
machine will not boot or run Windows, you probably have a
base address clash.
card and your Captivator Pro/TV applications freeze or quit
unexpectedly, or if you cannot capture video clips, you
probably have an interrupt clash.
Changing Captivator Pro/TV's hardware settings Contents 19