Connectors - VideoLogic CaptivatorPro User Manual

Connectors

Video input
Captivator Pro and Captivator ProTV accept video in Composite
and S-Video format in the NTSC, PAL, or SECAM video
standard. Only one of the inputs can be used at one time.
Internal audio connector
To connect Captivator ProTV's internal audio connector to your
sound card's CD-in connector you need an internal audio cable
(62575). This cable is suitable for 928Movie with audio, which
uses an ELCO 60 8283 3048 45 001 connector, or a Sound
Blaster
can order this cable from your Captivator ProTV supplier.
If your sound card does not use the same connectors as a
928Movie with audio or a Sound Blaster, you should be able to
get your local computer supplier to make up a cable, using the
details of Captivator ProTV's audio output connector given
below and the details of your sound card's CD-in connector.
When making up a cable we recommend that you protect against
noise by using screened, twisted pair cable.
Captivator ProTV uses a Molex connector, part number 70543.
The pin outs for this connector are as follows:
54 Captivator Pro & Captivator ProTV User Guide
The phono connector accepts video in Composite
format only.
The 4-pin mini-DIN connector accepts video in
Composite or S-Video format.
Pin S-Video
1 Ground
2 Ground
3 Luma
4 Chroma
™
, which use Molex 70066-G or 70400-G connectors. You
Composite
Video Return
NC
Composite
NC