Bosch AMAX 2100 Quick Start Manual page 23

AMAX panel
Menu Items
Figure 5.9: Communications and Reporting Manager (continued)
Bosch Sicherheitssysteme GmbH
TEST REPORT DURAT.
TEST RPT INTERV: h
TEST REPORT: hour
TEST REPORT: min
DUAL IP
REMOTE ACCESS
REM. ACCESS ARMED
REMOTE PSTN ACCESS
REMOTE IP ACCESS
RPC ACCESS CODE
RPC IP/ PORT/ POLL
RPC IP ADDRESS
RPC PORT 5 DIGIT!
RPC POLL: 1-15h
CALLBACK/ DOMESTIC
CALLBACK SETTING
CALLBACK/DOMEST No
DOMESTIC CALL
DOMESTIC No (1-4)
CHANGE DOM PHO. No
CALLBACK PHONE No
RING TIMES
Programming and Operating the AMAX System | en
Parameters / Description
00 = Do not use timing report
00 - 23 hours Others = Do not use real-time report
00 - 59 minutes Others = Do not use real-time report
0-1 ip module
1-2 ip modules
0-disable 1-enable
0-disable 1-enable
0-disable 1-enable
0-disable 1-enable
0 = Panel does not answer
1 - 13 = Number of rings until the control panel responds
14 = Call the control panel and allow the phone to ring no
more than twice and hang up. Wait a minimum of 8 sec and
call the control panel again. The control panel answers on
the first ring.
15 = Call the control panel and allow the phone to ring no
more than four times and then hang up. If you call again
within 45 sec, the control panel answers the call on the first
ring.
Quick Start Manual
Certification
01 - 99 = 1 - 99 hours EN=1-24
2015.05 | 05 | F.01U.309.297
23
Default
24
99
99
1
1
1
1
15
0
14