AMAX panel
5.5.4
Setting the COM Port
The COM port that has been assigned to the additional COM device (here COM4) has to be set
in the A-Link Plus program.
4
Figure 5.1: Selecting Communication Settings
The Communication Settings dialog opens.
4
Bosch Sicherheitssysteme GmbH
Select File – Communication Settings from the menu bar of the A-Link Plus program.
Set the COM port assigned to the additional COM device (here COM4) as Direct Link
Port.
Programming and Operating the AMAX System | en
Quick Start Manual
15
2015.05 | 05 | F.01U.309.297