Yamaha Neo's 4 YN50FU Owner's Manual page 21

Odometer and tripmeter modes
Pushing the "RESET/SELECT" button
switches the display between the
odometer mode "ODO" and the trip-
meter "TRIP" in the following order:
ODO → TRIP → ODO
RESET/
SELECT
RESET/
SELECT
If the fuel level warning indicator
comes on (see page 3-2), the odome-
ter display will automatically change to
the fuel reserve tripmeter mode "TRIP
F" and start counting the distance trav-
eled from that point. In that case, push-
ing the "RESET/SELECT"
switches the display between the vari-
ous tripmeter and odometer modes in
the following order:
TRIP F → ODO → TRIP → TRIP F
INSTRUMENT AND CONTROL FUNCTIONS
RESET/
SELECT
To reset a tripmeter, select it by push-
ing the "RESET/SELECT" button, and
then push it again for at least three sec-
onds. If you do not reset the fuel re-
serve tripmeter manually, it will reset
itself automatically and the display will
return to the prior mode after refueling
and traveling 5 km (3 mi).
TIP
The display cannot be changed back
to "TRIP F" after pushing the "RE-
SET/SELECT" button.
button
Oil change indicator "OIL CHANGE"
This indicator comes on at the initial
1000 km (600 mi), then at 3000 km
(1800 mi) and every 3000 km (1800 mi)
thereafter to indicate that the engine oil
RESET/ should be changed. (See page 6-8)
SELECT
RESET/
SELECT
Fuel gauge
The fuel gauge indicates the amount of
fuel in the fuel tank. The display seg-
ments of the fuel gauge disappear to-
wards "E" (Empty) as the fuel level
decreases. When only two segments
are left near "E", the fuel level warning
indicator comes on. Refuel as soon as
possible.
3-5
3