1. Cowling
2. Headlight coupler
3. Auxiliary light lead connector
4. Remove the headlight bulb cover.
1. Headlight bulb cover
5. Unhook the headlight bulb holder,
and then remove the burnt-out
bulb.
PERIODIC MAINTENANCE AND ADJUSTMENT
1. Headlight bulb holder
6. Place a new headlight bulb into
position, and then secure it with
the bulb holder.
7. Install the headlight bulb cover.
8. Connect the headlight coupler.
9. Install the cowling.
10. Have a Yamaha dealer adjust the
headlight beam if necessary.
6-26
Replacing a front turn signal
light bulb
NOTICE
It is advisable to have a Yamaha
dealer perform this job.
1. Place the scooter on the center-
stand.
2. Remove cowling A. (See page
6-6.)
3. Remove the turn signal light bulb
socket (together with the bulb) by
turning it counterclockwise.
1. Turn signal light bulb socket
4. Remove the burnt-out bulb by
pushing it in and turning it coun-
terclockwise.
EAUT1264
ECA10671
6