Front Brake Lever; Rear Brake Lever - Yamaha Neo's 4 YN50FU Owner's Manual

Dimmer switch " / "
Set this switch to " " for the high
beam and to " " for the low beam.
Turn signal switch " /
To signal a right-hand turn, push this
switch to " ". To signal a left-hand
turn, push this switch to "
released, the switch returns to the cen-
ter position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch " "
Press this switch to sound the horn.
Start switch " "
Push this switch while applying the
front or rear brake to crank the engine
with the starter. See page 5-1 for start-
ing instructions prior to starting the en-
gine.
INSTRUMENT AND CONTROL FUNCTIONS
EAU12401

Front brake lever

EAU12461
"
". When
1. Front brake lever
The front brake lever is located on the
right side of the handlebar. To apply
EAU12501
the front brake, pull this lever toward
the throttle grip.
This model is equipped with a unified
EAUM1133 brake system.
As this system is mechanical, addi-
tional free play can be felt in the front
brake lever when the rear brake lever is
being applied. See "Rear brake lever"
for detailed information on the unified
brake system.
EAUS2012

Rear brake lever

1. Front brake lever
The rear brake lever is located on the
left handlebar grip. To apply the rear
brake, pull the lever toward the handle-
bar grip.
This model is equipped with a unified
brake system.
When pulling the rear brake lever, the
rear brake and a portion of the front
brake are applied. For full braking per-
formance, apply both brake levers si-
multaneously.
3-7
EAUS1962
3