Scanner Model Panel Options; Detect Double Feeds - Xerox DocuMate 152i Scanning Manual

Document Settings
2. Select Enable user compression and Remember compression.
3. Note that if these two options are grayed out and you cannot select them, then these options
are not available for your scanner.
4. Click on OK.
5. Open the scanner interface.
6. Change to the Advanced source configuration mode.
7. In the Document settings section click on the Advanced tab.
8. If your scanner and application supports compressed file transfers, the Compression option
will now be available.

Scanner Model Panel Options

The options in this panel are specific to the scanner you are using. Some features described herein
may not be available for the current scanner. Please disregard any information about features
that you do not see in the interface for your scanner.
If you select an option in this panel that also appears on the Main panel, when you return to the
Main panel, that option will be selected. Select the Advanced source configuration mode to show
this panel.

Detect Double Feeds

Detect double feeds is the scanner's ability to detect when two or more pages are fed through
the scanner at the same time. When this option is turned on, ultrasonic waves are aimed at the
document to detect multiple pages by the level at which the waves pass through the pages. The
accuracy of this sensor depends on paper thickness and whether or not creasing is in the original
document.
Technical Note:
If you are getting false double feed errors, try cleaning the inside of the scanner. Excessive dust on
the sensor can cause false double feed errors. Refer to the maintenance section of the scanner's
user guide for instructions on cleaning the scanner.
Sensitivity Level
• Low works best with paper weight higher than 22lb (84 g/m
User's Guide
TWAIN Scanning Guide
2
or higher).
31