Configuring The System Settings (Advanced Setup Menu); Advanced Setup Menu Items; Changing The Speaker Impedance Setting (Sp Imp.) - Yamaha RX-S601 Owner's Manual

Configuring the system settings (ADVANCED SETUP menu)

Configure the system settings of the unit while viewing the front display.
1
Set the unit to standby mode.
2
While holding down STRAIGHT on the front panel, press z (power).
z (power)
PROGRAM
STRAIGHT
3
Press PROGRAM to select an item.
4
Press STRAIGHT to select a setting.
5
Press z (power) to set the unit to standby mode and turn it on again.
The new settings take effect.

ADVANCED SETUP menu items

• Default settings are underlined.
Item Function
SP IMP. Changes the speaker impedance setting.
REMOTE ID Selects the unit's remote control ID.
(Asia and General models only)
TU
Changes the FM/AM tuning frequency setting.
TV FORMAT Switches the video signal type of HDMI output.
INIT Restores the default settings.
UPDATE Updates the firmware.
VERSION Checks the version of firmware currently installed on the unit.

Changing the speaker impedance setting (SP IMP.)

CHARGE ENHANCER STEREO TUNED
OUT
ECO
SP IMP.••6¬MIN
Change the unit's speaker impedance settings depending on the impedance of the
speakers connected.
Settings
6 Ω MIN
Select this option when you connect 6-ohm speakers to the unit.
Select this option when you connect 8-ohm or higher speakers to the
8 Ω MIN
unit.
103
En
MUTE
SLEEP
VOL.
ADAPTIVE DRC VIRTUAL
Page
103
104
104
104
104
105
105