Network Settings; Network Connection Overview; Connection Methods - Canon WUX500 User Manual

Network settings

Network Connection Overview

Connecting the projector to a network enables you to control the projector from a
computer and receive notification of projector errors via email.
Depending on the method of network connection, preparation on the computer side
may be necessary. The following is an explanation of preparation on the computer
side.

Connection Methods

The projector can be connected to a wired network with a LAN cable or to a
wireless network via Wi-Fi.
Wired Networks
To connect the projector to a wired computer network, use a LAN cable.
Hub or router, etc.
Wireless Networks
• Projector Access Point (PJ AP) Mode
The projector can be used as an access point for direct communication with
wireless LAN-compatible computers.
Up to five computers can be connected at once.
LAN cable (shielded twisted pair;
not included)
105
Menu Description
Projector LAN terminal