Canon WUX500 User Manual page 84

Menu Description
Positional lock
> [Install settings] >
Operation of installation-related functions can be prohibited.
• Image flip H/V • Screen aspect • Keystone
• Digital image shift • Professional settings
Submenu
Off
On
Image flip H/V
> [Install settings] >
Specify the orientation of how the projector is installed.
Submenu
None
Ceiling mounted
Rear
Rear, Ceiling mounted
• To hang the projector from the ceiling, use the optional bracket. Contact the Canon
Customer Support Center for more detailed information.
• Image flipping will reset any adjustment for keystone distortion. In this case, redo the
adjustment.
Screen aspect
> [Install settings] >
Select an aspect ratio that matches that of the projection screen.
Submenu
16:10
16:9
4:3
16:9 D. Image Shift
4:3 D. Image Shift
[Positional lock]
The positional lock is not used.
Prevents adjustment of installation-related functions.
[Image flip H/V]
Select for projection from the floor or a table.
Select this to project an image with the projector hung from the
ceiling.
The projected image is inverted in both vertical and horizontal
directions.
Select this to project an image from behind the screen.
The projected image is inverted in the horizontal direction.
Select this to project an image from behind the screen with the
projector hung from the ceiling.
The projected image is inverted in the vertical direction.
[Screen aspect]
Select this when you use a screen with an aspect ratio of 16:10.
Select this when you use a screen with an aspect ratio of 16:9.
Select this when you use a screen with an aspect ratio of 4:3.
Select this when you use a screen with an aspect ratio of 16:9.
Although keystone correction is not available in this mode, images
can be shifted up or down. (P56)
Select this when you use a screen with an aspect ratio of 4:3.
Although keystone correction is not available in this mode, images
can be shifted left or right. (P56)
84
Function
Function
Function