Table of Contents
Advertisement
1
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
2
Using a small flat blade screw driver,
pry up on center console trim panel.
(Be careful not to scratch the trim
panel) (Figure A)
3
Loosen the shifter lock nut below
center console trim panel (Figure A)
and unscrew the shifter knob.
(Figure B)
4
Unplug electrical connectors and
remove center console trim panel.
(Figure C)
5
Remove (6) Allen screws from
radio/climate control trim panel and
(1) Phillips screw at the bottom of
the panel.
6
Unplug electrical connectors and
remove the panel. (Figure D)
Remove (4) screws securing the
7
radio. Disconnect and remove the
radio.
D
99-6505
DODGE VIPER 2003-2009
DASH DISASSEMBLY
A
B
C
6
Advertisement
Table of Contents
