Table of Contents
Advertisement
1.3 Check the installation environment
Installation environment
Before installing the device, checking the environment according to the
Table 1-1 Installation environment check items
Check item
standard
Moisture-resistant
The relative environment humidity must be in the range from
5% to 95%. If the humidity is higher than 95%, a dehumidifier
must be installed, such as an air conditioner with the
dehumidification function or a dedicated.
Dehumidifier. In addition, water seepage, water dropping, and
dew forming and not allowed.
Dustproof
If the office block is near the source of dust, such as the
colliery, country install for the offices, and anti-burglary and
fireproofing doors must be installed for the equipment room.
Lightproof
The device must be installed in the environment that is not
shined by a strong light, delaying the aging of the device
enclosure.
Installation notice
During the installation, please notice:
NVR power input voltage is DC12V （± 5%） and DC48V （± 5%） for POE. The supply
voltage must meet the input voltage, can't be higher or lower.
NVR installation should be kept horizontal.
NVR installation should avoid direct sunlight, and keep away from heat and high
temperature environment.
Make sure connects NVR with other equipment's normally.
Install the Hard Disk when use NVR first time.
NVR can automatically identify the hard drive capacity, support current market
mainly models. But for NVR work stable we advise to use good brand hard disk.
Others
Please use a soft and dry cloth to clean NVR, do not use chemical solvents.
Don't put other things on NVR.
NVR is standard of electromagnetic radiation, no harm to human body.
2
System
CPU
Industrial embedded CPU
Operating system
Embedded Linux 2.6
Embedded CMS system, fully functional friendly interface, easy to use;
Original "quick configuration" feature that enables NVR configuration and
management operations easy to get started.
Original "camera private network enables Plug-and-play camera access auto detection
Features
and schedule setup for fast rapid use.
Real-time fault alarm mechanism to timely reporting of hard disks, networks, fault
information, such as camera disconnection; Embedded WebServer using Flash
technology to support common browsers real-time monitoring and playback.
Video
4ch recording ,Maximum recording Bandwidth is 18Mbps
Record Info
Support resolution:1080P,720P,D1
H.264 (ISO / IEC 14496-10) high profile 4.2
Ability to decode
4ch up to 1080P playback
Single screen: 1x1080p\/720p/D1 with tour
Real-time video
Quad display of 1080p / 720p / D1 resolutions
Split screen 1/4//6/8/9/16 for D1 resolutions
DVI-I interface to transition through the first converted to VGA or HDMI output.
Output
Supplied with DVI to VGA converter. And DVI to HDMI converter.
Storage
2
Specification
3
Advertisement
Table of Contents
