eLine ELI-SIP-NVR4-POE Manual page 20

Figure 4-27 Add IP section.
15. Input the Begin IP address and End IP address and Port number.
16. Click Apply to finish the operation.
17. This system will search the IP cameras in such an IP segment automatically, and
display the searching result below.

Add manually
18. Click button, to call the add cameras interface like Figure 4-28
showing.
Figure 4-28 Add cameras manually
19. Input the IP address and Port number.
20. Click OK button to finish the operation.
21. If such camera is available, then the adding result will display below.
34
Step 21
Click button to call the interface as Figure 4-29.
Figure 4-29 Add camera management
Step 22 Select the cameras which you want to add from the left part list click
finish the operation. Click.
To cancel the adding operation.
Click OK button to finish the operation.
9.1.3 System alarming
Select Setup>System warning> system warning
Enter the system warning like Figure 4-30 showing.
to
35