Setup; Nvr Setup - eLine ELI-SIP-NVR4-POE Manual

Setup includes NVR setup and camera setup. NVR setup for NVR configure and
camera setup for cameras configure.

9.1 NVR setup

Click NVR setup in upper right to inter the NVR configure interface show in Figure
4-25.
Figure 4-25 NVR setup
9.1.1 Device information
When inter NVR setup interface, we can see the system information show in Figure
4-25 .
Device information includes:
 Device ID

Device Name

Manufacturer ID

Manufacturer Name
9

Setup

32

Hardware Version

Channel Qty
 Disk Qty

Only Device Name can be edit, other parameters can't be edit.

When device update the device info will auto update as well and will keep same step
with the software version.
9.1.2 Device Management
User and search, add, delete cameras through device management.
Select NVR setup->Device Management，
Enter the camera management interface, like Figure 4-26 showing; it will list all the
cameras which has been connected with NVR, and also some basic information of
them.
Figure 4-26 Device Management interface
Search and add cameras.
The steps of search and add cameras like below:
Step 19 Click the add button to call the camera searching interface like Figure 4-26 .
Step 20 Add the cameras according to the IP segment or something specific.

Add IP address
14. Click Add button in IP address, to call the IP adding interface as Figure 4-27.
33