eLine ELI-SIP-NVR4-POE Manual page 21

Figure 4-30 System warning information.
Warning information searching steps.
Step 23 Select the warning type (Disk Alarm, Record Alarm, All).
Step 24
Input searching Begin Time and End Time.
Step 25
Click searching button , then the searching result will be displayed below.
-
9.1.4 Network
You can check the Camera DHCP IP address, configure IP address, subnet mask,
gateway address, First NDS, backup NDS.
If set the camera in LAN network, please don't let any cameras' IP address conflict
with other computers.
Operates steps
Step 26 choose configure > system configure > network
Enter the network configuration interface like Figure 4-31 showing.
36
Figure 4-31 Network interface
Step 27 Configure the network parameters, reference the Table 4-4.
Table 4-4 Network parameters
Items Introduction
Get IP It will get the IP address from DHCP
address server automatically.
automatic
ally
IP
Camera IP address, it can configure the
Address
IP address depends on real situation.
Subnet Configure the subnet mask
mask
Gateway Input if needed
DNS Configure the DNS server address
Step 28 Click to application
 Call the Apply successfully; click OK to finish the network parameters
configuration.

If pop up other windows, then please confirm the parameters are all correct and
configure again.
9.1.5 Live video layout
You can configure the live video layout in order to call the live video quickly.
Live video layout can do below operations:

Create new layout

View current layout
How to configure
Switch DHCP to on by this
button .
Default IP is 192.168.0.121
Default address is
255.255.255.0
Default is 192.168.0.1
Default is 192.168.0.1
37