Table of Contents
Advertisement
Decoding ability
This system decoding ability is 6 channels D1 or 1 channel 720p or 1 channel 1080p. If
it is over loaded, then it will print out "Decoding ability not enough" on the screen
showing area.
Intelligent adaptive mechanism of stream frame rates
This system provides the intelligent adaptive mechanism of stream frame rates.
When you are selecting the camera to watch the live video, the system will select the
suitable stream according to system's own decoding ability and live video windows.
Always make the system working with best performance.
If you need to change the streams manually, you need right click the screen to call the
menu, then we will be able to see all the available streams in current camera. And after
we switched the streams, by the bottom line of the live video window we will see the
stream information.
Live video interface introduction as Figure 4-15.
Table 4-3 Live video interface introduction
Items
Name
Content
1
Top menu
Click Live video, Recording playback, Alarm search and
Quick setup to enter the responding interface.
Click
Click
Click
2
Channel
When you are watching the live video, we can select the 1
Layout
screen, you can select 1 display, four display, six display
layout and other layout mode. After we selected the layout
mode, we can move the camera from the left list to the
layout screen, then click save button to save the layout.
There exist two option "Shared layout" "May layout", this
system also support |"Wheel guard" mode, we can
configure the wheel guard mode in system management and
live video layout.
3
Camera
In the camera list it listed all the cameras in the system.
List
means normal,
unverified.(username or password is not correct)
4
Alarm
In this area will display the alarm information include
informatio
motion detection and I/O input alarm. This information area
n
will only display recently latest 20 alarm information. Click
to clear the information.
icon to check the HDD information.
icon to enter the recording backup interface.
icon to lock the interface.
means offline,
means
22
Items
Name
Content
5
Bottom
menu
Click
display the layout list, alarm list and alarm information.
：Play live video button.
：Close live video button.
：Mark tag button, you can mark the tag during the live
video, it will helps to track the video fragment in recording
playback.
：Click this button will call
can select which one want to display according to the
requirement.
：PTZ menu button, click will call the PTZ control
menu.
6
Live
Display the live video, and configure the sensor settings.
video
If you need to change the streams manually, we can right
click the menu, it will list out all the streams which is
available for current device. After we selected one of them,
it will also display the stream information at the bottom
side.
Full screen automatically
Click
button, it will be available to choose whether enable the full screen
function, also the time delay for full screen showing. When this function is enabled, if
we didn't do any actions during the delay time period, then it will go to the full screen
mode immediately. When it is in full screen mode, after you moved the mice to the
bottom line it will give out the tool bar, click the icon
full screen mode. Then you click
PTZ control
Click
button, call the PTZ control menu, as Figure 4-16 showing. In this interface
you can adjust pan, zoom, preset, trajectory, scanning, infrared light, north, timer
settings etc.
、
and
icon, we can try to hide or
in tool bar we can exit the
can go to the full screen mode manually again.
23
, we
Advertisement
Table of Contents
