A.q - eLine ELI-SIP-NVR4-POE Manual

11.5.2 Playback
Click Playback to inter Playback interface.
Step 1 choose the camera
Step 2 choose the date,If there is recording it will be green ,Click the date
Step 3 Click Play show in Figure 4-61 .
Figure 4-61 Playback
60
1. Why stop the device self-test interface does not
move?
You can be processed in accordance with the following methods:
Method one: Check the NVR are not equipped with hard disk;
Method Two: check the NVR detected, but not formatted;
Method three: Check the hard disk has been damaged;
Do not need to use the hard disk, you can click continue into the device。
2. Why interface display incomplete or location
offset?
You can be processed in accordance with the following methods:
Method: automatically adjust the display function.
Method: In the login screen, select the adjustment, enter the display adjustment
interface. Detailed steps Check 3 operating manual required reading.
3. Why monitor cannot see the image?
You can be processed in accordance with the following methods:
Method One: Detect Displays power;
Method Two: Detect Displays whether the correct access NVR;
Option 3: Please restart NVR.
4 Why can search the network camera, but can
connect？
Please be sure network cameras and NVR are in the same subnet.
61
12
F.A.Q