Menu Bar - Ask Proxima E2465 User Manual

Menu bar

Main menu
Sub menu
① PC adjust menu
Adjust computer parameters to match with VGA input signal format: auto PC adj, Fine sync,
Total dots, Horizontal, Vertical, Clamp,Display area H, Display area V.
② Screen menu
If a computer is selected as a signal source, the following setup options for the image size are
available: Normal, True, Full, Wide, Custom, Advanced or Digital zoom +/-.
If video equipment is selected as a signal source, the following setup options for the image size
are available: Normal,Full, Wide or Custom.
③ Image select menu
The available image modes are: Dynamic, Normal, Cinema, Blackboard (green), Colorboard
or User Image.
④ Image adjust menu
If a computer is selected as a signal source, the following image adjusting options are available:
Contrast, Brightness,Color temp., White balance (R/G/B), Sharpness and Gamma.
If video equipment is selected as a signal source, the following image adjusting options are
available: Contrast, Brightness,Color, Tint, White balance (R/G/B), Sharpness, Gamma,
Noise reduction and Progressive.
⑤ Input menu
Select input source: HDMI 1, HDMI 2, HDMI 3, Display Port, DVI, VGA 1, VGA 2, Component,
S-Video, Video 1, Video 2, RGBHV, Scart, Network, Card Reader, USB Autorun.
⑥ Sound menu
Adjust the volume level or mute the sound.
⑦ Setting menu
Configure operation settings of the projector.
⑧ Advanced setting menu
Configure advanced operation settings of the projector.
⑨ Network menu
Access the network function.
⑩ Infomation menu
To display the system information of the projector.
① ② ③ ④ ⑤ ⑥ ⑦
PC adj.
Auto PC adj.
Fine sync
Total dots
Horizontal
Vertical
Clamp
Display area H
Display area V
Reset
Mode free
Stored
- - - -
Exit Move
⑧ ⑨ ⑩
16
1344
296
35
1
1024
768
Next Next
Basic operation
23