Ask Proxima E2465 User Manual page 68

Appendix
4 Check IP address
Enter network menu and select network settings. Press SELECT to check IP address.
5 Input the IP address into the address bar.
Format: http:// IP address/.
(If wireless network is used, please open the wireless connecting in computer, find the
SSID displayed in "Network information", then input the IP address abtained from "Network
information" into the address bar.)
6 Select "Admin" to login the Network Display System page.(Both the initial name and passwords
are "admin".)
7 Items in Network Display System page including: System Status, General Setup, Network Setup
and Presenter setup.
System Status: Display the network status of the projector. ( Wired LAN as example)
General Setup:
"Change Password for Webpage": change the login password of admin.
"Power": turn on or turn off the projector via network.
"Source Select": select the input signal source. (Note: If you use ProjectorMe software to project
images, Network must be selected in Source Select.)
68