Advertisement
ISO DIN MOUNT RADIO PROVISION
*
Note: Refer also to the instructions included with the aftermarket radio.
1
Mount the ISO Brackets to the after-
market radio using the screws sup-
plied with the radio. (Figure A)
2
Slide the radio into the radio housing
until it snaps into place. (Figure B)
3
Attach the trim plate supplied with
the kit to the front of the radio hous-
ing assembly. (Figure B)
4
Attach the (2) PC-7503 panel clips to
the rear of the radio housing. (Figure C)
Continue to final assembly.
99-7504 KIT ASSEMBLY
4
A
B
C
Advertisement
