Calibration - Samsung DB10E-POE User Manual

Calibration

― Instructions below are for Windows 8. The same method applies to both Windows 7 and Windows 8.
― After changing the
Picture Size from the OSD menu, you may need to calibrate the picture settings again.
― In the occurrence of an error during calibration, go to Tablet PC Settings
1
In the Display tab, select Setup under Configure.
the Display tab. Tap Reset, and calibrate again.
2
Tap the page displayed on the product with your finger.
― In dual monitor mode: If the following page does not appear on the product, press the Enter key to
display the page.
If this is not the Tablet PC screen, press Enter to move to the next screen. To close the tool, press Esc.
Touch this screen to identity it as the touchscreen.
42