Samsung DB10E-POE User Manual page 153

Screen issue
The screen is too bright. The screen is too dark.
Screen colour is inconsistent.
White does not really look white.
There is no image on the screen and the power LED blinks
every 0.5 to 1 second.
The product will turn off automatically.
Picture quality of the product is different from the dealer
shop where it was purchased.
The screen display does not look normal.
The brightness and colour do not look normal.
Adjust Brightness and Contrast.
Picture Colour Space
Go to and adjust the
Go to Picture and adjust the White Balance
The product is in power-saving mode.
Press any key on the keyboard or move the mouse to return to the previous screen.
Go to System and make sure Sleep Timer
If a PC is connected to the product, check the power status of the PC.
Make sure the power cable is connected properly to the product and power outlet.
If the signal from a connected device is not detected, the product automatically turns off after 10 to 15
minutes.
Use an HDMI cable to obtain high-definition (HD) picture quality.
Encoded video content may cause the display to appear corrupted in scenes featuring fast moving
objects such as in a sports event or action video.
Low signal level or low picture quality may cause the display to appear corrupted. This does not mean
the product is defective.
A cell phone within a distance of one-meter radius may cause static on analogue and digital products.
Picture
Go to and adjust the screen settings such as
Sharpness.
System Energy Saving
Go to and adjust the
Reset the screen settings to the default settings.
settings.
settings.
is set to Off.
Picture Mode, Colour, Brightness
settings.
and
153