Table of Contents
Advertisement
1.
Press the MENU piston.
Use the - and + pistons to select the Temperaments function on the
2.
display.
3.
Press the SET piston. A list of available temperaments appears on the display.
The pointer indicates the actual temperament.
Use the - and + pistons to select the Custom Programming function.
4.
5.
Press the SET piston.
6.
Press and hold a key of the middle octave of the Great. The detune setting of
the pressed key appears on the display. The given detuning is compared to
the equal temperament.
7.
Use the - and + pistons to select the desired pitch of the pressed key.
8.
If necessary repeat steps 6 and 7 for another key of the middle octave.
9.
Press the MENU piston twice to exit the Johannus Menu.
Using the reset procedure Cust. Temperament def. the Custom
Temperament can be reset to equal temperament. See § 5.10 Reset Procedures.
5.14 Tracker Action
Tracker Action plays samples of 'rattle noise' of the key mechanics of a pipe organ when keys
are pressed. With the function Tracker Action the volume of this samples can be set per
intonation style and division.
The sound of Tracker Action is disabled if a solo- or orchestral voice is played on
the corresponding manual or pedal.
1.
Use the ROM., SYM., BAR. or HIS. pistons to activate an intonation style.
2.
Press the MENU piston.
Use the - and + pistons to select the Tracker Action function on the
3.
display.
4.
Press the SET piston. A list of available divisions and their actual tracker
action volume setting appear on the display.
5.
Use the - and + pistons to select the division the volume has to be changed.
6.
Press the SET piston. The pointer jumps to the current volume level.
7.
Use the - and + pistons to select the desired level.
8.
Press the SET piston to program the new level. The pointer jumps back to the
division choice.
9.
Repeat steps 5 to 8 to change the setting of another division or select
another intonation style to change the tracker action volume of that style.
10. Press the MENU piston twice to exit the Johannus Menu.
5.15 Tuning
The Tuning function shifts the pitch in steps of 1 Hz from 426 Hz to 454 Hz (standard pitch is a
= 440 Hz). The set pitch can be read on the display directly behind the transposer setting.
1.
Press the MENU piston.
Use the - and + pistons to select the Tuning function on the display.
2.
User Manual Symphonica 450
29
Advertisement
Table of Contents
