Table of Contents
Advertisement
d. Side Speakers
Startup Setting Side Speakers determines the volume level of the Surround
Loudspeakers at startup of the organ.
1.
Press the MENU piston.
Use the - and + pistons to select the Startup Settings function on
2.
the display.
3.
Press the SET piston. A list with available startup settings appears on the
display.
Use the - and + pistons to select the Side Speakers function on the
4.
display.
5.
Press the SET piston. The actual settings for the left and the right side
speaker appear on the display.
6.
Use the - and + pistons to select the side of which the level has to be
changed.
7.
Press the SET piston. The pointer jumps to the set level.
8.
Use the - and + pistons to select the desired level.
9.
Press the SET piston to confirm and to return to the Side Speakers menu.
For a proper balance of the surround sound it is advisable to keep both
sides on an equal level. Only use unequal levels to correct different volumes
caused by, for example, reflective surfaces on one side of the organ.
10. Press the MENU piston three times to exit the Johannus Menu.
e. Special Stops Mode
This function is only available if the organ is equipped with the optional
Platinum Voice Package.
Startup Setting Special Stops Mode determines special settings which are used for
Harpsichord, Harp and Piano.
Firstly it can be determined whether the Special Stops Mode function has to be
enabled.
After enabling, the following functions are to be set:
Reverb Program
Reverb Volume
Tweeter Volume Setting
1.
Press the MENU piston.
Use the - and + pistons to select the Startup Settings function on
2.
the display.
3.
Press the SET piston. A list with available startup settings appears on the
display.
Use the - and + pistons to select the Special Stops Mode function on
4.
the display.
5.
Press the SET piston. The possibility to enable or disable the Special Stops
Mode function appears on the display. Continue with step 6 if the function
has to be enabled. Skip to step 12 if the function has to be disabled.
Use the - and + pistons to select Enabled to enable the function.
6.
7.
Press the SET piston. A list of items appears on the display.
8.
Use the - and + pistons to select the item the setting has to be changed.
User Manual Symphonica 450
27
Advertisement
Table of Contents
