Table of Contents
Advertisement
Use the - and + pistons to select the Key Volumes function on the display.
4.
5.
Press the SET piston. The sub functions of the Key Volumes menu appears on
the display.
If you are asked to enter a code, the Key
Volumes function has been secured at the
request of the owner. Contact the owner
or dealer to retrieve the code. Enter the code using the pistons of the
capture memory locations and press the SET piston.
Use the - and + pistons to select the sub function Adjust and press the
6.
SET piston. A question to select a stop to adjust appears on the display.
7.
Activate one stop. A question to press a key appears on the display.
8.
Press one key on the corresponding division and hold the key. The display will
now show the following: Key: the key indicator and Vol: the volume.
9.
Use the - and + pistons to set the desired volume.
10. Press the SET piston to save the change. A request for confirmation appears
on the display. Use the - and + pistons to select No or Yes.
11. Press the SET piston to confirm.
12. Press the MENU piston to return to the Key Volume menu.
13. If the changes have not been saved, the display will show Discard
changes?. Use the - and + pistons to select Yes for discarding and press
the SET piston. Go to step 17.
14. Use the - and + pistons to select No if the changes have to be saved and press
the SET piston.
15. Press the SET piston. The display requests confirmation.
16. Use the - and + pistons to select Yes. Press the SET piston for confirmation.
17. Press the MENU piston three times to exit the Johannus Menu.
More key volumes can be changed by pressing another key or by selecting
another stop.
b. Reset one stop
The Reset one stop sub function resets the key volumes for one stop in one
intonation or variation to the factory setting.
1.
Switch off all stops.
2.
Select an intonation style or variation.
3.
Press the MENU piston.
Use the - and + pistons to select the Key Volumes function on the display.
4.
5.
Press the SET piston. The sub functions of the Key Volumes menu appear on
the display.
If you are asked to enter a code, the Key
Volumes function has been secured at the
request of the owner. Contact the owner
or dealer to retrieve the code. Enter the code using the pistons of the
capture memory locations and press the SET piston.
Use the - and + pistons to select the Reset one stop sub function on the
6.
display.
User Manual Symphonica 450
Enter code:
_ _ _ _
Enter code:
_ _ _ _
22
Advertisement
Table of Contents
