Supermicro X8QB6-F User Manual page 96

Motherboard
X8QB6-F/X8QBE-F User's Manual
SLP-S4# Minimum Assertion Width
This feature allows the user to set the minimum time allowed for the BIOS to detect
the onboard USB devices before the OS boots up. The settings are 4~5 Seconds,
3~4 Seconds, 2~3 Seconds and 1~2 Seconds.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Power-Off for
the system power to remain off after a power loss. Select Power-On for the system
power to be turned on after a power loss. Select Last State to allow the system to
resume its last state before a power loss. The options are Power-On, Power-Off
and Last State.
SATA (Serial ATA) Master Break Event
Select Enabled to cause a break to SATA Master activity from the S3/S6 state. The
options are Enabled and Disabled.
PCIE Ports Confi guration
This feature allows the user to confi gure the settings for the following PCI-Exp.
ports.
PCIE Port 0/PCIE Port 1/PCIE Port 2/PCIE Port 3/PCIE Port 4
Select Enabled to enable the port specifi ed. Select Disabled to disable the port
specifi ed. Select Auto to allow the BIOS to automatically enable the port when a
device is detected on the slot. The options are Enabled, Disabled, and Auto.
PCIE High Priority Port
This item allows the user to select a PCI-Exp port to be the priority port. Select
Disabled to disable this feature. The options are Port 0, Port 1, Port 2, Port 3, Port
4, Port 5 and Disabled.
Port 0 IOxAPIC Enable~ Port 5 IOxAPIC Enable
Select Enabled to enable IOxAPIC (Advanced Programmable Interrupt Controller)
support for a port specifi ed. Select Disabled to disable IOxAPIC support for a port
specifi ed. The options are Enabled and Disabled.
5-30