Processor And Heatsink Installation; Installing An Lga 1567 Processor - Supermicro X8QB6-F User Manual

X8QB6-F/X8QBE-F Motherboard User's Manual
3-2

Processor and Heatsink Installation

When handling the processor package, avoid placing direct pressure on
!
the label area of the fan.
Notes:
1. Always connect the power cord last, and always remove it before adding,
removing or changing any hardware components. Make sure that you install
the processor into the CPU socket before you install the CPU heatsink.
2. Make sure to install the motherboard into the chassis before you install the
CPU heatsink and heatsink fans.
3. When purchasing a motherboard without a 7500 Series processor pre-
installed, make sure that the CPU socket plastic cap is in place, and none of
the CPU socket pins are bent; otherwise, contact the retailer immediately.
4. Refer to the Motherboard Features Section for more details on CPU support.

Installing an LGA 1567 Processor

1. Press the socket clip to release the load plate, which covers the CPU socket,
from its locking position.
2. Gently lift the socket clip to open the load plate.
3. Hold the plastic cap at its north and south center edges to remove it from the
CPU socket.
4. After removing the plastic cap, using your thumb and the index fi nger, hold
the CPU at the north and south center edges.
3-2