Table of Contents
Advertisement
5.
Align the CPU key, which is a semi-circle cutout, against the socket key,
which is the notch below the gold color dot on the side of the socket.
6.
Align Pin 1 on the CPU against Pin 1 on the CPU socket.
CPU Key
7.
Once both CPU and the socket are aligned, carefully lower the CPU straight
down into the socket. (To avoid damaging the CPU or the socket, do not rub
the CPU against the surface of the socket or its pins.)
8.
With the CPU inside the socket, inspect the four corners of the CPU to make
sure that the CPU is properly installed.
9.
Once the CPU is securely seated on the socket, lower the CPU load plate to
the socket.
10.
Use your thumb to gently push the socket clip down to the clip lock.
Warning: Please save the plastic cap. The motherboard must be shipped
with the plastic cap properly installed to protect the CPU socket pins.
Shipment without the plastic cap properly installed will cause damage
to the socket pins.
CPU Pin 1
3-3
Chapter 3: Installation
Advertisement
Table of Contents
