Table of Contents
Advertisement
X8QB6-F/X8QBE-F
Auto, 128 Bytes, .256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes, 4096 Bytes, and
Max Supported (the Maximum Size supported by the device
Extended Tag Field
Select Enabled to allow the 8-bit Tag fi eld in a PCI-E device to be used as a
requestor. The options are Auto, Disabled and Enabled.
No Snoop
If this item is set to Enabled, "No Snoop" option in a PCI-E device will be activated.
The options are Auto, Disabled and Enabled.
Maximum Read Request Size
Select Auto to allow the BIOS to set the Maximum Read Request Size of a PCI
Express device to enhance system performance. If Auto is not select, use the up/
down arrow keys to select the Maximum Read Request Size for the PCI-E device.
The options are Auto, 128 Bytes, .256 Bytes, 512 Bytes, 1024 Bytes, 2048 Bytes,
4096 Bytes, and Max Supported (the Maximum Size supported by the device
Active State Power Management
Select Enabled to use the power management for signal transactions between the
PCI Express L0 and L1 Links. Select Enabled to confi gure PCI-Exp. L0 and L1 Link
power states. The options are Disabled and Enabled.
Extended Synch
Select Enabled to generate Synchronization patterns. The options are Auto,
Disabled and Enabled.
Remote Access Confi guration
Remote Access
This allows the user to enable the Remote Access feature. The options are Disabled
and Enabled. If Remote Access is set to Enabled, the following items will display:
Serial Port Number
This feature allows the user decide which serial port to be used for Console Redi-
rection. The options are COM 1 and COM 2.
Base Address, IRQ
This item displays the based address and IRQ of the serial port specifi ed.
Serial Port Mode
Use this item to set the serial port mode for Console Redirection. The options are
115200 8, n 1; 57600 8, n, 1; 38400 8, n, 1; 19200 8, n, 1; and 9600 8, n, 1.
Motherboard
User's Manual
5-20
.
.
Advertisement
Table of Contents
