Supermicro X8QB6-F User Manual page 79

AHCI BIOS Support
Select Enable to enable AHCI (Advanced Host Controller Interface) BIOS support.
The options are Enabled and Disabled. If it is set to Enabled, the items below
will display.
AHCI Port0~AHCI Port5
SATA Port0/SATA Port1/SATA Port2/SATA Port3/SATA Port4/SATA Port5
This item allows the user to select the type of device connected to the port
specifi ed above. Select Auto to allow the BIOS automatically detect the type of
a specifi c port. The options are Auto and Not Installed.
S.M.A.R.T.
Self-Monitoring Analysis and Reporting Technology (SMART) can help predict
impending drive failures. Select Auto to allow the AMI BIOS to automatically
detect hard disk drive support. Select Disabled to prevent the AMI BIOS from
using the S.M.A.R.T. Select Enabled to allow the AMI BIOS to use the S.M.A.R.T.
to support hard drive disk. The options are Disabled and Enabled.
Event Log Confi guration
View Event Log
Use this option to view the System Event Log.
Mark All Events as Read
This option marks all events as read. The options are OK and Cancel.
Clear Event Log
This option clears the Event Log memory of all messages. The options are OK
and Cancel.

Hardware Health
This feature allows the user to monitor system health and review the status of each
item as displayed.
CPU Overheat Alarm
This option allows the user to select the CPU Overheat Alarm setting which de-
termines when the CPU OH alarm will be activated to provide warning of possible
CPU overheat.
Warning! 1.Any temperature that exceeds the CPU threshold tempera-
ture predefi ned by the CPU manufacturer may result in CPU overheat or
Monitor
5-13
Chapter 5: AMI BIOS