Supermicro X8QB6-F User Manual page 85


Gateway Address
Parameter Selector
This item displays the status of the Gateway Address Parameter Selector.
Gateway Address
The BIOS will automatically enter the Gateway address of this machine; however
it may be overwritten. The value of each three-digit number separated by dots
should not exceed 255.
Current IP Address in BMC
The BIOS will automatically enter the current IP address in BMC for this machine;
however it may be overwritten. The value of each three-digit number separated
by dots should not exceed 255.
Intel VT-D Confi guration
Intel VT-d
Select Enabled to enable Intel Virtualization Technology support for Direct I/O VT-d
by reporting the I/O device assignments to VMM through the DMAR ACPI Tables.
This feature offers fully-protected I/O resource-sharing across the Intel platforms,
providing the user with greater reliability, security and availability in networking and
data-sharing. The options are Enabled and Disabled.
MPS Confi guration
MPS Revision
This feature allows the user to specify the version of the Multi-Processor Specifi ca-
tion (MPS) the motherboard is using. The options are 1.4 and 1.1.
PCI Express Confi guration
Relaxed Ordering
Select Enabled to enable PCI-E Relaxed Ordering support. The options are Auto,
Disabled and Enabled.
Maximum Payload Size
Select Auto to allow the BIOS to set the Maximum Payload Size of a PCI Express
device to enhance system performance. If Auto is not select, use the up/down arrow
keys to select the Maximum Payload Size for the PCI-E device. The options are
5-19
Chapter 5: AMI BIOS