Eliminating Minor Faults Yourself - Siemens TK 60 series Operating Instructions Manual

Eliminating minor faults yourself

Fault
No hot water or steam
discharge.
Froth insufficient or too runny.
Coffee is running a drop
at a time.
Coffee has no crema" (layer
f f th)
of froth).
Grind unit is not grinding
coffee beans.
Descaling programme
or cleaning programme is not
starting.
h
flashes 5x on display 3.
Descaling programme does
not start
Grinding unit is making loud
noise.
a
lits
ijkl
flashing
b c
or
light up
ijkl
flash
If faults cannot be eliminated, always call the Hotline!
26
Cause
Nozzle 13 is blocked.
Sleeve a on nozzle 13 not in
correct position.
Unsuitable milk.
Degree of grinding too fine.
Preground coffee too fine.
( y Unsuitable type of coffee.
Beans no longer fresh.
Degree of grinding not
appropriate for coffee beans.
Beans are not falling into the
grinding unit (too oily).
System too hot.
Filter active
Foreign objects in the grinding
unit (e.g. grit which also
occurs in superior types
of coffee).
Illuminated ring on the
button 4 flashes.
Appliance too cold.
Illuminated ring on the
button 4 flashes.
Technical fault.
Remedial action
Thoroughly clean nozzle 13
Push down sleeve a
on nozzle 13.
Use cold semi skimmed milk.
Select a coarser degree
of grinding.
Use a coarser ground coffee.
Change the type of coffee.
Use fresh beans.
Optimise degree of grinding.
Gently tap the bean container.
Set function selector 2 to 0
and drain approx. one cup of
hot water.
Remove filter and set water
hardness. Never descale the
appliance with the filter
inserted.
Contact Hotline.
Note: Preground coffee can
still be prepared.
d
Wait until the appliance
has warmed up to room
temperature.
d
Switch OFF the device at the
mains switch 1 for at least ten
seconds.
Subject to alterations