Cleaning The Nozzle; Descaling The Appliance - Siemens TK 60 series Operating Instructions Manual

Starting the cleaning programme
q Completely fill water tank 22.
q Hold down button + 8 for at least
h
3 seconds. If
on display 3, see Eliminating minor faults
yourself".
q Empty and re insert tray 24 and coffee
dregs tray 23.
Note: The appliance is automatically cleaned,
a
lights up on display 3. Wait for the next
b l
symbols and
(approx. 1 minute).
q Open the right cover of the appliance
18 and duct cover for ground coffee 16.
q Insert a cleaning tablet into duct 16.
q Close the cover on the ground coffee
duct 16 and the right cover of the ap
pliance 18.
q Press the 2 button 5.
Note:The appliance is automatically cleaned,
a
lights up on display 3. Wait for the next
f
symbol on display 3
(approx. 10 minutes).

Descaling the appliance

If the illuminated ring on the descaling button
4 9 is lit red and
on display 3 when the appliance is switched
on, the appliance must be descaled
immediately. If the appliance is not descaled
as instructed, it may be damaged.
Warning
Never descale the appliance with vinegar
or vinegar based agents!
Do not use cleaning tablets.
Never interrupt the descaling programme!
Do not drink liquid!
24
flashes occasionally
on display 3
k
is indicated
q Empty and re insert tray 24 and coffee
dregs tray 23.
The cleaning process is complete.
i
The illuminated ring on button + 8
goes out. The appliance is ready for use
again.

Cleaning the nozzle

Warning
Clean the nozzle 13 after each use.
q Place an appropriate receptacle under the
nozzle 13.
q Briefly set function selector 2 to 0.
d
Risk of scalding!
When the function selector is set to 0, the
nozzle may spurt slightly. Do not touch nozzle
13 or direct at people.
q Set function selector 2 to
q Wipe the outside of the nozzle 13 after it
has cooled down.
q Dismantle the nozzle 13 and clean tho
roughly. Unscrew part 13/b with a coin
(see illustration on fold out page).
A descaling agent is enclosed with the ap
i
pliance. Specially developed and suitable
agents are available from customer ser
vice (order no.: 31 0451).
While the descaling programme is running
i
approx. 35 minutes processes and
instructions are indicated on display 3.
The specified times may differ.
The illuminated ring on the descaling but
i
ton 4 9 flashes during the descaling
programme.
z
.