Removing Main Burner And Gas Valve - Space-Ray LTU Series Installation And Operation Instructions Manual

24.2)

REMOVING MAIN BURNER AND GAS VALVE

1. Disconnect electrical supply and gas connection at the restrainer nipple.
2. Open the access panel and disconnect the wires from gas valve.
3. Remove the burner clamp and screws.
4. Remove the burner and gas valve assembly from the cabinet.
5. Unscrew the burner from the manifold.
6. Check the orifice. If the gas valve is to be replaced, the pipe joint compounds must be resistant to the
action of liquefied petroleum gases.
Form #43155040
May 2013 -53-